Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 29 | 50 | 66 | 75 |
| 1440p QHD | 53 | 81 | 104 | 122 |
| 1080p Full HD | 70 | 115 | 141 | 175 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
Downfall is a 2016 horror title, and the pairing of an AMD Ryzen 7 7800X3D with an NVIDIA GeForce RTX 2060 handles it comfortably at mainstream resolutions. The recorded data places this combination 2,975th out of 3,716 measured hardware pairings for this game, a ranking that reflects the GPU's position rather than the CPU's: the 7800X3D sits in the 83rd percentile of all CPUs in the database, while the RTX 2060 occupies the 58th percentile of GPUs. That asymmetry defines the experience. Every configuration below was measured directly, not estimated, and the 60 FPS playable threshold applied throughout.
CPU and GPU Roles
The Ryzen 7 7800X3D is dramatically overqualified for Downfall. It is an 8-core, 16-thread Zen 4 processor built on TSMC's 5 nm node, carrying 96 MB of shared L3 cache, a 4.20 GHz base clock and a 5.00 GHz boost clock on the AM5 platform. Its benchmark portfolio (a Cinebench R23 multi-core score of 16,817, a Geekbench multi-core score of 15,610, and a PassMark single-thread score of 3,759) places it far beyond anything a 2016 horror game can stress. Database analysis shows the CPU is never the limiting factor here at any tested resolution or preset.
The scaling data makes the GPU-bound nature of this pairing obvious. Moving from 1920x1080 Ultra to 3840x2160 Ultra drops the average from 70.3 FPS to 29.3 FPS, a fall of well over half as the pixel count quadruples. If the CPU were the bottleneck, frame rates would stay relatively flat across resolutions; instead, every step up in resolution cuts frame rates substantially at every preset. At 1080p Low the system reaches 174.7 FPS, and that figure represents the ceiling where the processor and game engine, rather than the Turing graphics card, begin to set the pace. The RTX 2060, with its TU106 chip, 1,920 shading units and 6 GB of GDDR6 on a 192-bit bus delivering 336 GB/s of bandwidth, does the heavy lifting everywhere else.
Preset changes tell the same story. At 3840x2160, dropping from Ultra to Low more than doubles the average, from 29.3 to 75.3 FPS. That sensitivity to settings, combined with resolution scaling that tracks pixel count closely, confirms a GPU-limited scenario at 1440p and 4K.
The Verdict
Yes, this PC runs Downfall, and in most cases it runs it well.
At 1920x1080, every preset clears the 60 FPS threshold: Low at 174.7, Medium at 140.5, High at 114.8, and even Ultra at 70.3 FPS. Full 1080p Ultra playability is the headline result.
At 2560x1440, Low, Medium and High all stay above 60 FPS, with the best playable preset being High at 80.7 FPS. Only Ultra falls short, at 52.9 FPS.
At 3840x2160, the margin narrows. Low (75.3 FPS) and Medium (65.6 FPS) remain playable, but High manages just 50 FPS and Ultra collapses to 29.3 FPS. 4K is therefore viable only with settings discipline.
In short: fully playable at 1080p at maximum settings, comfortably playable at 1440p up to High, and conditionally playable at 4K up to Medium.
FAQ
Q: Can the RTX 2060 run Downfall at 4K?
A: Yes, with reduced settings. At 3840x2160, Low averages 75.3 FPS and Medium averages 65.6 FPS, both above the 60 FPS threshold. High (50 FPS) and Ultra (29.3 FPS) do not qualify as playable.
Q: What is the best-looking playable configuration overall?
A: 1920x1080 Ultra, which averages 70.3 FPS. It is the highest preset that stays at or above 60 FPS, and 1080p is the only resolution where Ultra is playable.
Q: Is the Ryzen 7 7800X3D fast enough for this game?
A: Easily. The chip scores 2,426 in Geekbench single-core and 15,610 in Geekbench multi-core, and it ranks in the 83rd percentile of all CPUs in the database. A 2016 release like Downfall poses no meaningful CPU load to it.
Q: How much performance is lost going from 1080p to 1440p at High?
A: The average drops from 114.8 FPS to 80.7 FPS, a loss of roughly 30 percent, which is consistent with a GPU-limited scenario.
Q: Does turning settings down help much at 4K?
A: Substantially. Going from Ultra to Low at 3840x2160 raises the average from 29.3 to 75.3 FPS, more than a doubling.
Q: How does this hardware combination rank against others tested in Downfall?
A: It ranks 2,975th out of 3,716 measured pairings. The CPU is elite for the game; the end-of-life RTX 2060, in the 58th GPU percentile, is what holds the rank down.
Measured FPS Breakdown
All figures are measured averages. Frame-time minimums and maximums were not recorded for these runs.
1920x1080
| Preset | Avg FPS |
|---|---|
| Low | 174.7 |
| Medium | 140.5 |
| High | 114.8 |
| Ultra | 70.3 |
2560x1440
| Preset | Avg FPS |
|---|---|
| Low | 122.3 |
| Medium | 104.0 |
| High | 80.7 |
| Ultra | 52.9 |
3840x2160
| Preset | Avg FPS |
|---|---|
| Low | 75.3 |
| Medium | 65.6 |
| High | 50.0 |
| Ultra | 29.3 |
The pattern is consistent: each preset step costs roughly 15 to 25 percent of the frame rate at 1080p and 1440p, while 4K punishes the top two presets disproportionately. The jump from Medium to Ultra at 4K costs over half the average (65.6 down to 29.3 FPS), suggesting the 6 GB frame buffer and 336 GB/s of memory bandwidth are being pushed past their comfort zone at that resolution.
Similar Performance Alternatives
On the CPU side, the database identifies several processors with statistically identical aggregate performance. The AMD Ryzen 7 8700G, Intel Core i7-13650HX and AMD Ryzen 7 7745HX all match the 7800X3D's average benchmark score with a delta of 0 percent, and the AMD Ryzen 9 PRO 6950H sits just 0.4 percent behind. Any of these chips would deliver the same Downfall experience, since the game never taxes the 7800X3D in the first place.
On the GPU side, the nearest rivals cluster tightly around the RTX 2060's average score of 15,290. The NVIDIA GeForce GTX 580 is a 0 percent match, the AMD Radeon 680M trails by 0.1 percent, the NVIDIA GeForce RTX 3050 OEM by 0.6 percent, and the AMD Radeon RX 7600 by 0.8 percent. Swapping the RTX 2060 for any of these cards would reproduce nearly identical frame rates in Downfall. Notably, the integrated Radeon 680M being a statistical equal means the discrete card is not strictly required for this particular title, though the 2060's dedicated 6 GB of GDDR6 and 30 RT cores provide headroom the integrated solution lacks.
Best Settings per Resolution
Based on the recorded data, the most demanding preset that holds at or above 60 FPS at each resolution:
- 1920x1080: Ultra, 70.3 FPS average. The full visual package is on the table, with a comfortable margin above the threshold.
- 2560x1440: High, 80.7 FPS average. Ultra at this resolution averages 52.9 FPS, below the bar, so High is the ceiling.
- 3840x2160: Medium, 65.6 FPS average. High manages only 50 FPS at 4K, making Medium the last playable preset.
For players who prioritize fluidity over fidelity, the Low preset delivers 174.7 FPS at 1080p and 122.3 FPS at 1440p, figures that suit high-refresh displays. But the balanced recommendation is straightforward: play at 1080p Ultra or 1440p High, where this pairing of an overpowered CPU and a mid-tier Turing card delivers Downfall exactly as intended.