Downfall

The AMD Ryzen 7 7700X paired with the Intel Arc B570 delivers a solid 1080p and 1440p gaming experience in Downfall, though 4K requires significant settings compromises. This analysis breaks down the measured performance data for this specific CPU-GPU combination in this horror title.

How This Combo Ranks

The AMD Ryzen 7 7700X and Intel Arc B570 combination ranks 2988 out of 3716 tested combos in Downfall. This places the pairing in the lower-middle portion of the benchmark database, indicating that while this system is fully capable of running the game, it is far from top-tier hardware. The ranking reflects the Arc B570's position as a mid-range graphics card rather than a flagship solution.

The CPU itself sits in the 85th percentile among all tested processors, showing strong raw compute capability. The GPU, in contrast, sits in the 65th percentile among all tested graphics cards. This mismatch suggests the graphics card is the limiting factor for achieving higher frame rates, particularly at more demanding settings. The rank of 2988 out of 3716 also reflects that Downfall is a 2016 title, and many modern systems with high-end GPUs will naturally outperform this mid-range configuration.

The measured data confirms this is a playable combination across most common resolutions, but the low overall rank signals that enthusiasts seeking maximum visual fidelity at 4K will need to look at more powerful GPU options. The data shows a clear performance ceiling imposed by the Arc B570's 10 GB of GDDR6 memory and 160-bit bus width.

Best Settings per Resolution

At 3840x2160 (4K), the most demanding preset that stays at or above 60 FPS is Low, which delivers an average of 72 FPS. The Medium preset dips to 59 FPS average, with minimums of 50 FPS, making it technically below the playable threshold. High settings at 4K drop further to 49 FPS, and Ultra falls to 30 FPS. For a locked 60 FPS experience at 4K, users must accept Low settings.

At 2560x1440 (1440p), the best playable preset is High, achieving 78 FPS average. This is a significant jump from 4K, showing the resolution scaling benefits. Medium runs at 95 FPS, and Low reaches 116 FPS. Ultra at 1440p falls to 49 FPS, below the 60 FPS threshold. The data indicates that High settings at 1440p provide the best balance of visual quality and performance, with nearly a 20 FPS margin above the playable threshold.

At 1920x1080 (1080p), every preset clears 60 FPS. The best playable setting is Ultra, running at 68 FPS average. High delivers 109 FPS, Medium provides 133 FPS, and Low reaches 163 FPS. This resolution offers complete flexibility—even the most demanding preset maintains a comfortable margin above the playable threshold.

The pattern across resolutions is clear: 1080p allows full Ultra settings, 1440p caps at High, and 4K requires Low. The 60 FPS threshold is consistently met at lower resolutions, but the GPU's memory bandwidth and compute limits become apparent as resolution increases.

CPU and GPU Roles

The performance scaling between resolutions and presets reveals how the CPU and GPU divide responsibilities in Downfall. At 1080p with Low settings, the system achieves 163 FPS, while at 4K with Low settings it drops to 72 FPS. This 2.3x reduction in frame rate when quadrupling pixel count indicates the GPU is the dominant bottleneck at higher resolutions—the Arc B570 simply cannot sustain the fill rate demanded by 4K.

At 1440p, the Medium preset shows 95 FPS average, while at 4K Medium drops to 59 FPS. The gap between 1440p and 4K remains consistent across presets, confirming that resolution scaling is primarily GPU-limited. The Ryzen 7 7700X, with its 8 cores and 16 threads, provides ample headroom for the game's CPU demands, which are modest for a 2016 horror title.

However, the CPU's role becomes more evident at 1080p. The jump from 1440p High (78 FPS) to 1080p High (109 FPS) shows a 40% improvement, which is less than the 78% pixel count reduction. This diminishing return suggests that at 1080p, the CPU begins to influence the upper frame rate ceiling, though the Ryzen 7 7700X's strong single-thread performance (3dmark single thread score of 1090) keeps this from being a severe limitation.

The Ultra preset scaling further illustrates the GPU bottleneck. At 1080p Ultra, the system hits 68 FPS, at 1440p Ultra it drops to 49 FPS, and at 4K Ultra it falls to 30 FPS. These figures track closely with pixel count increases, demonstrating that the Arc B570's 11.52 TFLOPS of FP32 performance is the primary constraint at maximum settings.

Similar Performance Alternatives

For the AMD Ryzen 7 7700X, the nearest rivals in average benchmark score include the AMD Ryzen 7 PRO 5845, which scores within 0.3% of the 7700X. The Intel Core 7 250H and AMD Ryzen AI 7 PRO 350 each sit within 0.5%, while the Intel Core Ultra 9 185H is within 0.7%. These processors would deliver nearly identical CPU-bound performance in Downfall, meaning users upgrading from any of these would see no meaningful difference in frame rates at 1080p where CPU matters most.

For the Intel Arc B570, the closest GPU rival is the NVIDIA GeForce RTX 3070 Mobile, with a delta of just 0.1%. The Intel Arc A750 scores nearly identically, within -0.1%, making it the most direct desktop alternative. The NVIDIA Quadro M4000M is within 0.4%, and the AMD Radeon R9 M390X within -0.5%. In Downfall, any of these GPUs would produce essentially the same frame rates as the Arc B570 at every resolution and preset combination.

This tight clustering around the Arc B570's average score of 20556 means that swapping to any of these rivals would not change the playability verdict at any resolution. The 4K Low requirement, 1440p High ceiling, and 1080p Ultra capability would all remain identical.

Measured FPS Breakdown

At 1920x1080, the full performance range is visible. Low settings produce 163 FPS average, with Medium at 133 FPS (minimum 113 FPS, maximum 153 FPS). High settings maintain 109 FPS, while Ultra drops to 68 FPS. The 95 FPS spread between Low and Ultra at 1080p shows that the Arc B570 has substantial headroom at this resolution, even before the CPU becomes a factor.

At 2560x1440, Low settings deliver 116 FPS, Medium runs at 95 FPS (minimum 81 FPS, maximum 110 FPS), and High achieves 78 FPS. Ultra falls to 49 FPS, below the playable threshold. The step from High to Ultra at 1440p represents the largest single-preset drop in the dataset—a 29 FPS decrease—highlighting the significant cost of the Ultra preset's additional effects.

At 3840x2160, the data shows a compressed range. Low settings reach 72 FPS, Medium averages 59 FPS (minimum 50 FPS, maximum 68 FPS), High drops to 49 FPS, and Ultra bottoms out at 30 FPS. The 22 FPS difference between Low and High at 4K is much smaller than at lower resolutions, confirming that the GPU is fully saturated at 4K regardless of preset.

The Medium preset is the only configuration with complete min/max data across all three resolutions. At 1080p, the range spans 113-153 FPS; at 1440p, 81-110 FPS; and at 4K, 50-68 FPS. These ranges show consistent frame pacing with roughly 30-40 FPS variability, which is acceptable for a horror game where sudden frame drops can impact atmosphere.

FAQ

Q: Can this system run Downfall at 4K with playable frame rates?

A: Yes, but only at Low settings. The measured average at 3840x2160 with Low is 72 FPS. Medium drops to 59 FPS, which falls below the 60 FPS playable threshold.

Q: What is the best visual quality preset at 1440p?

A: High settings at 2560x1440 deliver 78 FPS average, which is the highest preset that maintains 60 FPS. Ultra at this resolution drops to 49 FPS, making it unplayable.

Q: Is the CPU or GPU more important for this game?

A: The GPU is the primary bottleneck at higher resolutions. At 4K, even Low settings only reach 72 FPS, while at 1080p Low reaches 163 FPS. The Ryzen 7 7700X provides ample CPU performance, as shown by its 85th percentile ranking, but the Arc B570's limits are reached at 4K.

Q: How does the Arc B570 compare to the Arc A750 in performance?

A: The two GPUs are virtually identical in average benchmark score, with the A750 within -0.1% of the B570. In Downfall, they would produce effectively the same frame rates at every resolution and preset.

Q: Does this system achieve 60 FPS at 1080p with maximum settings?

A: Yes. At 1920x1080 with Ultra settings, the system averages 68 FPS, clearing the 60 FPS threshold by a comfortable margin.

Q: What frame rates can I expect at 1440p Medium settings?

A: The Medium preset at 2560x1440 averages 95 FPS, with minimums of 81 FPS and maximums of 110 FPS. This provides a smooth experience well above the playable threshold.

The Verdict

This PC can run Downfall successfully across all three tested resolutions, but with varying quality ceilings. At 1920x1080, the verdict is clear: every preset is playable, with Ultra delivering 68 FPS average. This is the ideal resolution for this combination, offering full visual fidelity with a comfortable margin above the 60 FPS threshold.

At 2560x1440, the system plays High settings at 78 FPS, which is the recommended configuration. Users can choose between Medium (95 FPS) for higher frame rates or High for better visuals, both comfortably above the playable threshold. Ultra at 1440p is not recommended, as it drops to 49 FPS.

At 3840x2160, the system barely qualifies as playable. Only Low settings clear 60 FPS, averaging 72 FPS. The Medium preset at 59 FPS is technically below threshold, though some users may find it acceptable given the 50 FPS minimum. High and Ultra settings are not viable at 4K.

The overall verdict: the AMD Ryzen 7 7700X + Intel Arc B570 combination is a capable 1080p and 1440p system for Downfall, but 4K users must accept Low settings. The data shows the GPU is the limiting factor at higher resolutions, while the CPU provides ample headroom throughout. For a horror game that relies on atmosphere over competitive performance, the 60 FPS threshold at 1080p Ultra and 1440p High delivers a fully immersive experience.