Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 21 | 28 | 35 | 44 |
| 1440p QHD | 33 | 50 | 60 | 72 |
| 1080p Full HD | 44 | 68 | 87 | 103 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
Measured FPS Breakdown
At 3840x2160, the AMD Ryzen 7 5800XT with AMD Radeon RX 580 produces playable results only at the Low preset, where the average frame rate reaches 44.1 FPS. Moving up the quality ladder, Medium drops to 35.2 FPS, High falls to 27.7 FPS, and Ultra bottoms out at 20.7 FPS. None of these settings clear the 60 FPS threshold, and the gap between Low and Ultra is substantial, a 23.4 FPS difference that represents a 53% performance loss when maxing out every visual option.
Stepping down to 2560x1440, the picture improves considerably. Low settings deliver 71.6 FPS, which is comfortably above the playable threshold. Medium follows at 60.3 FPS, just barely clearing the bar. High drops below playability at 49.7 FPS, and Ultra falls further to 32.7 FPS. The scaling from 4K to 1440p is consistent: each preset gains roughly 60% more frame rate, which aligns with the pixel count reduction of about 55%. This suggests the GPU is the primary bottleneck at higher resolutions, as the CPU has ample headroom.
At 1920x1080, the combination becomes genuinely capable. Low settings hit 103 FPS, a very smooth experience for a horror title. Medium reaches 86.7 FPS, and High stays above 60 FPS at 68.3 FPS. Ultra, however, drops to 44.3 FPS, missing the playable mark. The delta between Low and Ultra at 1080p is 58.7 FPS, meaning Ultra runs at less than half the frame rate of Low. This is a typical pattern for a GPU that is several generations old, where the highest preset includes effects that heavily tax the Polaris architecture.
The recorded data shows no minimum or maximum FPS values, so the analysis relies solely on averages. This is worth noting because horror games often have sudden frame time spikes during scripted events, but without those measurements, the average figures are the only available reference.
FAQ
Q: Can this PC run Downfall at 4K?
A: No. The best average at 3840x2160 is 44.1 FPS on Low settings. Medium, High, and Ultra all fall below 40 FPS, with Ultra at 20.7 FPS. The playable threshold of 60 FPS is not reached at any preset.
Q: What is the best playable setting at 2560x1440?
A: Medium is the highest preset that stays at or above 60 FPS, averaging exactly 60.3 FPS. Low runs faster at 71.6 FPS, but Medium offers the best visual quality while remaining playable.
Q: Why does Ultra perform so poorly at 1080p?
A: At 1920x1080, Ultra averages 44.3 FPS, which is 35% slower than High at 68.3 FPS. The gap between High and Ultra is larger than the gap between Medium and High, indicating that Ultra enables effects that disproportionately impact the RX 580's GCN 4.0 architecture.
Q: How does the CPU compare to similar processors?
A: The Ryzen 7 5800XT scores an average of 29879 in the database, placing it in the 81st percentile of all CPUs. Its nearest rival, the AMD Ryzen 7 7840H, scores 29868, a negligible 0% difference. The Ryzen 7 8845HS and Ryzen 7 7840HS are 0.3% behind, while the Ryzen 5 9600X is 0.6% ahead.
Q: How does the GPU compare to similar graphics cards?
A: The RX 580 has an average benchmark score of 12928, placing it in the 53rd percentile of all GPUs. The NVIDIA GeForce RTX 3050 Ti Mobile scores 12940, which is 0.1% higher. The GTX 1660 SUPER is 0.4% ahead, while the AMD Radeon 740M is 0.5% behind and the AMD FirePro W5100 is 0.6% behind.
Q: Is the game more demanding at higher resolutions?
A: Yes. The data shows a clear resolution scaling pattern. At 1080p High, the average is 68.3 FPS. At 1440p High, it drops to 49.7 FPS, a 27% reduction. At 4K High, it falls to 27.7 FPS, a 59% reduction from 1440p. This is consistent with the GPU being the limiting factor.
Best Settings per Resolution
At 1920x1080, the highest preset that maintains at least 60 FPS is High, with an average of 68.3 FPS. This leaves a small buffer above the threshold, so users may want to consider Medium at 86.7 FPS if they prefer extra headroom for frame time spikes.
At 2560x1440, the best playable setting is Medium, averaging 60.3 FPS. This is right at the threshold, so any additional background load could push it below 60. Low at 71.6 FPS is a safer choice for consistent performance.
At 3840x2160, no preset reaches 60 FPS. The best average is Low at 44.1 FPS, which is playable in a technical sense but falls short of the established threshold. Users targeting 4K would need to lower the resolution or accept sub-60 frame rates.
Similar Performance Alternatives
For the CPU, the Ryzen 7 5800XT sits very close to four other processors in the database. The AMD Ryzen 7 7840H has an average score of 29868, essentially identical to the 5800XT's 29879. The AMD Ryzen 7 8845HS and AMD Ryzen 7 7840HS both score 29955, which is 0.3% higher. The AMD Ryzen 5 9600X scores 29713, 0.6% lower. In practice, swapping between these CPUs would produce nearly indistinguishable frame rates in Downfall, as the game is not CPU-bound at the tested resolutions.
For the GPU, the RX 580 is bracketed by four rivals. The NVIDIA GeForce RTX 3050 Ti Mobile scores 12940, just 0.1% above the RX 580's 12928. The NVIDIA GeForce GTX 1660 SUPER scores 12986, 0.4% higher. On the lower side, the AMD Radeon 740M scores 12870, 0.5% below, and the AMD FirePro W5100 scores 12847, 0.6% below. These deltas are small enough that all five GPUs would land within a few frames per second of each other in Downfall, assuming no driver-specific issues.
The practical takeaway is that this combo behaves nearly identically to a system with any of these rival components. Users considering upgrades or replacements should expect similar performance unless they move significantly up or down the performance hierarchy.
How This Combo Ranks
Among all 3716 tested combinations in the database, this pairing of Ryzen 7 5800XT and RX 580 ranks 3387th for Downfall. That places it in the bottom 9% of tested systems, which aligns with the GPU's age and mid-range standing. The CPU is far more capable, sitting in the 81st percentile, but the RX 580's 53rd percentile ranking drags the overall combo down.
The ranking reflects that Downfall is a 2016 title, so it does not demand modern hardware. However, the RX 580's 8 GB of GDDR5 memory and 256 GB/s bandwidth are sufficient for the game's textures, and the 6.175 TFLOPS of FP32 compute is adequate for lower presets. The bottleneck appears at Ultra settings, where the GPU's shading units and texture units cannot keep up with the increased load.
The combo ranks low primarily because many newer GPUs, even entry-level ones, outperform the RX 580 in raw rasterization. But within the context of this specific game, the pairing is usable at 1080p and 1440p with appropriate settings.
The Verdict
This PC can run Downfall, but the experience depends heavily on resolution and settings. At 1920x1080, the system clears 60 FPS on Low (103 FPS), Medium (86.7 FPS), and High (68.3 FPS). Ultra falls short at 44.3 FPS. At 2560x1440, Low (71.6 FPS) and Medium (60.3 FPS) are playable, while High (49.7 FPS) and Ultra (32.7 FPS) are not. At 3840x2160, no preset reaches 60 FPS, with Low being the fastest at 44.1 FPS.
For a horror game, where smoothness and consistent frame pacing matter for immersion, the recommended configuration is 1080p High at 68.3 FPS. This provides a good balance of visual quality and performance. At 1440p, Medium at 60.3 FPS is technically playable but leaves almost no margin for dips. Users with 4K displays should drop to 1080p for a playable experience.
The verdict by resolution is clear: 1080p is fully supported, 1440p is partially supported, and 4K is not supported at the 60 FPS threshold.
CPU and GPU Roles
The data shows a clear division of labor between the CPU and GPU in Downfall. At 1920x1080, the CPU's strength is evident: the Ryzen 7 5800XT has 8 cores, 16 threads, and a boost clock of 4.80 GHz, which is more than enough for a 2016 horror title. The frame rates at 1080p Low (103 FPS) suggest the CPU can push well beyond what the GPU can render, meaning the GPU is the limiting factor even at this resolution.
As resolution increases, the GPU's role becomes even more dominant. From 1080p to 1440p, average frame rates drop by roughly 27% across presets. From 1440p to 4K, they drop by another 44% on average. This scaling is characteristic of a GPU-bound scenario, where the CPU has spare capacity and the render load grows with pixel count.
The CPU's benchmark scores support this interpretation. Its single-thread score of 959 in 3DMark and 3359 in Cinebench R23 indicate strong per-core performance, while its multi-thread scores (7683 in 3DMark 16-thread, 23794 in Cinebench R23) show ample headroom for any background tasks. The RX 580, by contrast, has a passmark G3D score of 8813 and a 53rd percentile ranking, placing it in the middle of the GPU pack.
At 1080p, the GPU is the bottleneck at all presets, as evidenced by the large frame rate differences between Low and Ultra (58.7 FPS). At 1440p, the GPU bottleneck intensifies, and at 4K, the GPU is so overwhelmed that even Low settings cannot reach 60 FPS. The CPU's role is essentially static; it never becomes the limiting factor in any tested configuration. This means users should focus on GPU settings rather than CPU-related tweaks when optimizing for Downfall.