Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 17 | 27 | 33 | 41 |
| 1440p QHD | 28 | 44 | 54 | 66 |
| 1080p Full HD | 39 | 62 | 75 | 92 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
Measured FPS Breakdown
The recorded data for Downfall with this AMD Ryzen 7 5800XT and AMD Radeon RX 570 combination covers three resolutions and four quality presets. At 1920x1080, the frame rates are generally solid. Low settings deliver an average of 92 FPS, Medium averages 75 FPS with a minimum of 64 FPS and a maximum of 86 FPS, and High averages 62 FPS. Ultra drops sharply to an average of 39 FPS, which is below the 60 FPS playable threshold.
Moving to 2560x1440, the performance picture changes noticeably. Low settings remain playable with an average of 66 FPS. Medium drops to 54 FPS average, with a minimum of 46 FPS and a maximum of 62 FPS. High falls further to 44 FPS average, and Ultra bottoms out at 28 FPS average. The gap between Low and Medium at this resolution is 12 FPS, while the gap between Medium and High is 10 FPS, indicating a steep scaling curve as settings increase.
At 3840x2160, the combination struggles to maintain playable frame rates at any setting. Low averages 41 FPS, Medium averages 33 FPS with a minimum of 28 FPS and a maximum of 38 FPS, High averages 27 FPS, and Ultra averages only 17 FPS. None of these settings reach the 60 FPS target, and even the lowest preset falls 19 FPS short of that mark.
The data shows a consistent pattern: each resolution step from 1080p to 1440p costs roughly 25-30% of the average FPS at equivalent settings, and the step from 1440p to 4K costs another 35-40%. For example, High settings go from 62 FPS at 1080p, to 44 FPS at 1440p, to 27 FPS at 4K. This scaling suggests the GPU is the limiting factor at higher resolutions, as the frame rate drops proportionally with pixel count.
FAQ
Q: Can this PC run Downfall at 1920x1080 with High settings?
A: Yes. The measured average FPS at 1080p High is 62 FPS, which clears the 60 FPS playable threshold. This is the highest preset that remains playable at this resolution.
Q: What is the best playable setting at 2560x1440?
A: Low is the only playable preset at 1440p, with an average of 66 FPS. Medium falls to 54 FPS average, which is below the 60 FPS threshold, so it is not considered playable according to the database criteria.
Q: Is 3840x2160 playable at all with this hardware?
A: No. All four presets at 4K fall short of 60 FPS. The highest average is 41 FPS on Low, and Ultra averages only 17 FPS. None of the settings reach the playable threshold.
Q: How much performance is lost when moving from 1080p to 1440p?
A: At Low settings, the average drops from 92 FPS to 66 FPS, a loss of 26 FPS. At High settings, the average drops from 62 FPS to 44 FPS, a loss of 18 FPS. The percentage reduction is consistent across presets, roughly 28-29%.
Q: What is the frame rate range for Medium settings at 1080p?
A: The recorded data shows an average of 75 FPS, with a minimum of 64 FPS and a maximum of 86 FPS. This means the frame rate never dips below the playable threshold, even in the worst measured moment.
Q: How does the Ultra preset compare to High at 1080p?
A: Ultra averages 39 FPS, which is 23 FPS lower than High at 62 FPS. This is a 37% drop in performance for the highest quality settings, and it pushes the frame rate well below the 60 FPS playable threshold.
CPU and GPU Roles
The benchmark data indicates that the AMD Radeon RX 570 is the primary bottleneck for Downfall at higher resolutions. The CPU, AMD Ryzen 7 5800XT, is a strong performer with a Cinebench R23 multicore score of 23794 and a single-core score of 3359, placing it in the 81st percentile of all CPUs. However, the GPU sits in the 74th percentile of all GPUs with an average benchmark score of 28766. The gap between these percentile ranks suggests the GPU cannot fully utilize the CPU's capabilities in this game.
Evidence from the resolution scaling supports this conclusion. At 1080p Low, the average FPS is 92, which is high but not exceptionally so. When moving to 1440p Low, the FPS drops to 66, a 28% reduction. When moving to 4K Low, the FPS drops to 41, another 38% reduction. These drops align closely with the increase in pixel count, which is a classic sign of GPU-bound performance. If the CPU were the limiting factor, the frame rates would stay more consistent across resolutions.
The settings scaling tells a similar story. At 1080p, going from Low to Medium costs 17 FPS (92 to 75), and going from Medium to High costs 13 FPS (75 to 62). At 1440p, the same steps cost 12 FPS (66 to 54) and 10 FPS (54 to 44). At 4K, the steps cost 8 FPS (41 to 33) and 6 FPS (33 to 27). The diminishing cost of each settings step at higher resolutions indicates that the GPU is already saturated with pixel work, so changing quality settings has less relative impact.
For this specific game, Downfall is a horror title from 2016, and its rendering demands appear to scale heavily with resolution. The CPU's role is more prominent at lower resolutions and lower settings, where the GPU can keep up and the CPU's 8 cores and 16 threads can help maintain high frame rates. At 1080p Low, the 92 FPS average shows the CPU can push well past the playable threshold when the GPU is not overloaded. But at 1440p and above, the GPU's 4 GB of GDDR5 memory and 224.0 GB/s bandwidth become the limiting factor, and the CPU's headroom goes unused.
In practical terms, users should treat this as a GPU-limited configuration for Downfall at 1440p and 4K. The CPU is more than capable, with benchmark scores comparable to the AMD Ryzen 7 7840H and AMD Ryzen 7 8845HS, both of which score near 29868-29955 in average benchmarks. The GPU, by contrast, is close to the AMD Radeon RX 470 and AMD Radeon R9 M295X in performance, which are older or lower-tier parts. The bottleneck is clear.
The Verdict
According to the database's verdict by resolution, this PC can run Downfall at 1920x1080 with High, Medium, or Low settings, all of which clear the 60 FPS playable threshold. The best playable setting at 1080p is High, with an average of 62 FPS. Ultra is not playable, averaging only 39 FPS.
At 2560x1440, the system can run the game at Low settings only, with an average of 66 FPS. Medium, High, and Ultra all fall below the 60 FPS threshold, with averages of 54, 44, and 28 FPS respectively. This resolution is playable, but only with reduced visual quality.
At 3840x2160, the system cannot run the game at any playable setting. The highest average is 41 FPS on Low, which is 19 FPS short of the threshold. The verdict for 4K is that no settings are playable, and the best settings field is null, confirming that even the lowest preset does not meet the requirement.
Overall, this is a 1080p machine for Downfall. The data shows a clear boundary: 1080p High is the ceiling for a smooth experience, 1440p Low is the fallback for higher resolution with compromises, and 4K is not viable. The combo rank in game is 3547 out of 3716 combinations, which places this configuration in the lower tier of tested systems for this title.
Similar Performance Alternatives
The CPU nearest rivals show that the AMD Ryzen 7 5800XT performs similarly to several mobile and desktop parts. The AMD Ryzen 7 7840H has an average benchmark score of 29868, essentially identical to the 5800XT. The AMD Ryzen 7 8845HS and AMD Ryzen 7 7840HS both score 29955, which is 0.3% higher than the 5800XT. The AMD Ryzen 5 9600X scores 29713, which is 0.6% lower. These four CPUs would deliver nearly identical in-game performance for Downfall, so users with any of these processors should expect the same frame rates when paired with the same GPU.
On the GPU side, the AMD Radeon RX 570 has nearest rivals that bracket its performance. The AMD Radeon RX 6800M scores 28874, which is 0.4% higher than the RX 570, meaning it would produce frame rates marginally above the numbers in this report. The AMD Radeon RX 470 scores 28996, which is 0.8% higher, also slightly faster. The AMD Radeon R9 M295X scores 28580, which is 0.7% lower, and the NVIDIA Quadro RTX 8000 scores 28421, which is 1.2% lower. These four GPUs would all land within 1-2% of the RX 570's performance, so the measured FPS values for Downfall would be nearly identical.
For practical purposes, this means the benchmark results presented here apply to a broad family of hardware. A system with a Ryzen 7 7840H or Ryzen 5 9600X paired with an RX 470 or RX 6800M would show the same playable settings and similar FPS numbers. The differences are small enough that they would not change the verdict at any resolution.
Best Settings per Resolution
At 1920x1080, the best playable setting is High, with an average of 62 FPS. This is the highest quality preset that stays at or above 60 FPS. Medium averages 75 FPS and Low averages 92 FPS, but High offers the best visual quality while still meeting the playable threshold. Ultra is not an option, as it drops to 39 FPS.
At 2560x1440, the best playable setting is Low, with an average of 66 FPS. This is the only preset that clears 60 FPS at this resolution. Medium averages 54 FPS, which is below the threshold, so it is excluded. Users who prioritize resolution over quality should choose 1440p Low over 1080p High, but they will get lower visual fidelity in exchange for the extra pixels.
At 3840x2160, there is no best playable setting. The database records no playable settings at 4K, and the best settings field is null. The highest average is 41 FPS on Low, which is insufficient. Users who attempt 4K will need to accept frame rates in the 17-41 FPS range depending on preset, none of which provide a smooth experience.
For the optimal experience, the data suggests 1080p High as the default choice. It provides 62 FPS average, which is above the threshold but not by a large margin, so users may want to consider Medium at 75 FPS for additional headroom if they prefer smoother motion over sharper textures. The minimum FPS at 1080p Medium is 64 FPS, which ensures the frame rate never dips below 60, while High has no recorded minimum in the data, leaving some uncertainty about worst-case dips.