Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 58 | 93 | 114 | 139 |
| 1440p QHD | 94 | 150 | 182 | 223 |
| 1080p Full HD | 131 | 210 | 256 | 312 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 7 5800X3D and NVIDIA GeForce RTX 4070 combination delivers a decisive performance profile for Downfall, a horror title from 2016. The measured data places this pairing at rank 862 out of 3716 tested combos, placing it in the top 23% of all systems evaluated. The RTX 4070's 81st percentile ranking among all GPUs and the Ryzen 7 5800X3D's 80th percentile among all CPUs indicate a balanced pairing where neither component becomes a systematic bottleneck. Across all resolutions and settings, the system never falls below the 60 FPS playability threshold, with the weakest result being 58 FPS at 4K Ultra, a single outlier that still sits close to the playability line.
Measured FPS Breakdown
At 1920x1080, the RTX 4070 and 5800X3D produce frame rates that exceed the demands of any display refresh rate commonly found in gaming monitors. The Low preset yields an average of 312 FPS, while the Medium preset delivers 256 FPS on average with a minimum of 217 FPS and a maximum of 294 FPS. The High preset reaches 210 FPS average, and even the Ultra preset maintains a 131 FPS average. The gap between Low and Ultra is substantial — 181 FPS — indicating that the Ultra preset imposes roughly 58% more rendering load than Low at 1080p. The minimum frame rate recorded at 1080p Medium is 217 FPS, which is still more than 3.5 times the 60 FPS playability threshold, demonstrating that frame pacing remains consistent even under load.
Moving to 2560x1440, the performance scaling follows a predictable pattern. Low settings produce 223 FPS average, Medium yields 182 FPS with a minimum of 155 FPS and a maximum of 210 FPS, and High delivers 150 FPS average. The Ultra preset drops to 94 FPS average, which still clears the playability threshold by a comfortable margin of 34 FPS. The step from High to Ultra at 1440p represents the largest relative drop among consecutive presets — 56 FPS, or a 37% reduction. This indicates that Ultra settings at 1440p engage additional GPU workload that the 12 GB of GDDR6X memory and 5888 shading units handle without dipping below 60 FPS.
At 3840x2160, the system reaches its most demanding configuration. The Low preset averages 139 FPS, Medium averages 114 FPS with a minimum of 97 FPS and a maximum of 131 FPS, and High averages 93 FPS. The Ultra preset falls to 58 FPS average, which is 2 FPS below the 60 FPS playability threshold. This is the only measured configuration where the system fails to maintain playable performance. The difference between High and Ultra at 4K — 35 FPS — is proportionally larger than at lower resolutions, suggesting that Ultra settings at 4K push the RTX 4070's 504.2 GB/s memory bandwidth and 158.4 GPixel/s pixel rate to their practical limits. The Medium preset's minimum of 97 FPS at 4K shows that the system has substantial headroom below Ultra, making the 4K Ultra result an anomaly rather than a systemic limitation.
Similar Performance Alternatives
The nearest rivals for the Ryzen 7 5800X3D, based on average benchmark scores, include the AMD Ryzen 7 6800U with a score of 27887 and a delta of 0%, the Intel Core i9-10900K at 27872 with a 0.1% delta, the AMD Ryzen AI 5 PRO 340 at 27932 with a -0.1% delta, and the Intel Core i5-12600KF at 27799 with a 0.3% delta. These processors bracket the 5800X3D's average benchmark score of 27896 so closely that in CPU-bound scenarios for Downfall, users with any of these chips would experience virtually identical frame rates. The i9-10900K, despite having a different architecture and platform, lands within 0.1% of the 5800X3D's average score, meaning the 5800X3D's 96 MB of L3 cache provides no measurable advantage over the i9-10900K in this game's workload.
For the RTX 4070, the nearest GPU rivals are the NVIDIA Tesla P4 with an average score of 37628 and a 0.1% delta, the AMD Radeon RX Vega 56 at 37507 with a 0.4% delta, the NVIDIA GeForce RTX 4080 Mobile at 38135 with a -1.3% delta, and the AMD Radeon PRO W6400 at 37157 with a 1.3% delta. These deltas are small enough that in practice, any of these GPUs would produce nearly identical frame rates in Downfall at the same settings and resolution. The RTX 4080 Mobile being 1.3% faster than the desktop RTX 4070 is notable — it suggests that laptop users with the 4080 Mobile would see roughly 1-2 FPS difference at 4K Ultra, which is imperceptible in real gameplay. The Tesla P4, a data center card, matching the RTX 4070's average score within 0.1% indicates that Downfall's rendering workload is well-served by compute-oriented hardware, not just gaming-focused GPUs.
How This Combo Ranks
The combo rank of 862 out of 3716 combinations places this system in the 76.8th percentile of all tested configurations for Downfall. This ranking reflects the balance between the 5800X3D's 8-core, 16-thread configuration with a 4.50 GHz boost clock and the RTX 4070's 29.15 TFLOPS FP32 throughput. The data indicates that this pairing outperforms 2854 other combinations in the database while trailing 861 combinations. Given that the 5800X3D and RTX 4070 are both end-of-life products with release dates in 2022 and 2023 respectively, this ranking suggests that newer hardware does not dramatically outperform this pairing for Downfall specifically. The game's 2016 release date means it predates the RTX 4070's Ada Lovelace architecture by seven years, and the measured results show that even modern demanding settings do not stress the system beyond its capabilities.
The Verdict
The verdict data shows that this PC can run Downfall at playable frame rates across nearly the entire settings and resolution matrix. At 1920x1080, all four settings — Low, Medium, High, and Ultra — clear the 60 FPS threshold, with the Ultra preset delivering 131 FPS average, more than double the playability threshold. At 2560x1440, all four settings also remain playable, with Ultra achieving 94 FPS average. At 3840x2160, the High preset delivers 93 FPS average, the Medium preset delivers 114 FPS average, and the Low preset delivers 139 FPS average — all comfortably above 60 FPS. The only exception is 4K Ultra at 58 FPS average, which falls 2 FPS short of the playability threshold. Users targeting 4K should select High settings for a guaranteed playable experience, while users at 1440p or 1080p can enable Ultra settings without concern. The system's 12 GB of VRAM and 16 threads provide sufficient headroom for the game's horror-themed rendering effects at all playable configurations.
FAQ
Q: What is the best setting for 4K resolution on this system?
A: The High preset at 3840x2160 delivers 93 FPS average, which is the highest playable setting at that resolution. The Ultra preset falls to 58 FPS average, which is below the 60 FPS playability threshold, so High is the recommended choice.
Q: Can this system maintain 60 FPS at 1440p with Ultra settings?
A: Yes, the Ultra preset at 2560x1440 achieves 94 FPS average, which is 34 FPS above the playability threshold. The Medium preset at this resolution provides 182 FPS average with a minimum of 155 FPS, showing consistent frame delivery.
Q: How much performance difference exists between 1080p and 4K at High settings?
A: At 1920x1080 High, the system delivers 210 FPS average, while at 3840x2160 High, it delivers 93 FPS average. This represents a 117 FPS reduction, or a 56% performance drop when scaling from 1080p to 4K at the same preset.
Q: Is the Ryzen 7 5800X3D a bottleneck for the RTX 4070 in this game?
A: No, the data shows the combo ranks in the top 23% of all configurations, and the CPU's nearest rival, the Intel Core i9-10900K, scores within 0.1% of the 5800X3D's average benchmark. The balanced FPS results across resolutions indicate no single component limits performance.
Q: What minimum FPS can be expected at 4K Medium settings?
A: The measured minimum at 3840x2160 Medium is 97 FPS, with an average of 114 FPS and a maximum of 131 FPS. The minimum is still 37 FPS above the playability threshold.
Q: Does the system support ray tracing features for this game?
A: The RTX 4070 includes 46 RT cores and supports DirectX 12 Ultimate (12_2), but the measured FPS data does not include ray tracing-specific benchmarks. The standard preset measurements show playable performance across all resolutions except 4K Ultra.
Best Settings per Resolution
At 1920x1080, the Ultra preset is the most demanding configuration that maintains at least 60 FPS, delivering 131 FPS average. This is the optimal choice for 1080p users seeking maximum visual quality without sacrificing smoothness.
At 2560x1440, the Ultra preset achieves 94 FPS average, which clears the 60 FPS threshold by 34 FPS. This makes Ultra the recommended setting for 1440p, as it provides the highest visual fidelity while maintaining a comfortable margin above the playability line.
At 3840x2160, the High preset is the best playable option, delivering 93 FPS average. The Ultra preset at this resolution drops to 58 FPS, which is 2 FPS below the threshold, so users must choose High to guarantee playable performance. The Medium preset at 4K offers 114 FPS average but with lower visual quality than High, making High the balanced recommendation.
CPU and GPU Roles
The scaling data reveals how the CPU and GPU divide responsibilities across resolutions in Downfall. At 1920x1080, the frame rates range from 131 FPS at Ultra to 312 FPS at Low, with the Medium preset showing a minimum of 217 FPS. This wide spread indicates that at 1080p, the system operates in a GPU-limited regime where the RTX 4070's 29.15 TFLOPS throughput determines performance. The 5800X3D's 16 threads and 96 MB L3 cache provide sufficient CPU throughput to feed the GPU at these high frame rates, as evidenced by the 312 FPS Low preset result — a figure that would expose CPU bottlenecks in less capable processors.
At 2560x1440, the same pattern holds but with reduced headroom. The Low preset drops to 223 FPS average from 312 FPS at 1080p, a 28% reduction. The Ultra preset falls from 131 FPS to 94 FPS, a 28% reduction as well. This proportional scaling across all presets confirms that the GPU remains the primary performance determinant at 1440p, with the CPU maintaining a consistent feed rate. The 5800X3D's single-thread score of 884 in 3DMark and 1452 in Cinebench R23 indicate adequate per-core performance for the game's physics and AI workloads.
At 3840x2160, the GPU's role becomes dominant. The Low preset yields 139 FPS, Medium yields 114 FPS, and High yields 93 FPS — a scaling pattern that closely tracks the increased pixel count and rendering complexity. The Ultra preset's drop to 58 FPS represents a 38% reduction from High, which is the largest preset-to-preset decline in the entire measurement set. This indicates that Ultra settings at 4K engage additional GPU features that strain the RTX 4070's 504.2 GB/s memory bandwidth and 64 ROPs. The CPU's influence at 4K is minimal, as the frame rates are well below the processor's capable range. The data shows that for Downfall, the RTX 4070 is the performance bottleneck at all resolutions when compared to the 5800X3D's demonstrated capability, but the combination remains playable everywhere except 4K Ultra.