Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 74 | 85 | 104 |
| 1440p QHD | 75 | 114 | 138 | 169 |
| 1080p Full HD | 101 | 159 | 195 | 238 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 5060 combination delivers a strong performance profile for Downfall, with benchmark data showing that this pairing is capable of running the game at high frame rates across most settings and resolutions. The data indicates a clear hierarchy: 1080p and 1440p are thoroughly covered, while 4K requires some settings adjustments to maintain smooth gameplay.
Similar Performance Alternatives
The CPU benchmarks place the AMD Ryzen 7 5700X3D at the 77th percentile among all tested processors, with an average benchmark score of 24709. The nearest rival is the AMD Ryzen 5 7600X3D, which scores 24728—a negligible 0.1% difference. This means that for Downfall, swapping to the Ryzen 5 7600X3D would result in virtually identical CPU-bound performance. The AMD Ryzen 9 5900HX sits 0.5% behind at 24822, while the Intel Core i5-12450HX trails by 0.5% with a score of 24576. The Intel Core i5-11600 is 0.6% behind at 24563. These delta percentages are so small that any of these processors would behave nearly indistinguishably in gameplay terms.
On the GPU side, the NVIDIA GeForce RTX 5060 holds the 72nd percentile among all graphics cards, with an average benchmark score of 26331. The closest rival is the AMD Radeon 860M at 26401, a 0.3% difference. The NVIDIA GeForce MX550 matches that 0.3% gap with a score of 26421. The AMD Radeon RX 5700 XT 50th Anniversary is 0.8% behind at 26553, while the AMD Radeon RX 6750 XT is 1.2% ahead at 26011. In practical terms, all four of these GPUs would deliver nearly identical frame rates in Downfall at the same settings, making them valid alternatives if the RTX 5060 is unavailable.
CPU and GPU Roles
The performance scaling across resolutions reveals how the workload shifts between CPU and GPU. At 1920x1080 with Low settings, the system produces 237.8 FPS average. Moving to Medium increases the average to 195.2 FPS, a drop of 42.6 FPS. High settings produce 158.8 FPS, and Ultra yields 101.3 FPS. The gap between Low and Ultra at 1080p is 136.5 FPS, indicating that the GPU is not the primary constraint at this resolution—the CPU has enough headroom to push very high frame rates.
At 2560x1440, the pattern changes. Low settings average 169 FPS, Medium drops to 137.6 FPS, High produces 114 FPS, and Ultra yields 74.8 FPS. The scaling from Low to Ultra at 1440p is 94.2 FPS, which is less pronounced than at 1080p. This suggests the GPU begins to take on more responsibility as resolution increases, but the CPU still provides ample performance.
At 3840x2160, the GPU becomes the dominant factor. Low settings average 104.2 FPS, Medium drops to 84.7 FPS, High produces 74.2 FPS, and Ultra falls to 43.1 FPS. The difference between Low and Ultra at 4K is 61.1 FPS, the smallest spread of the three resolutions. The Ultra preset at 4K drops below the 60 FPS playable threshold, which demonstrates that the RTX 5060 is the limiting component at this resolution. The CPU, with its strong multi-threaded performance (22366 in Cinebench R23 multicore), is not the bottleneck here.
How This Combo Ranks
Among the 3716 tested combinations in the database, this CPU-GPU pairing ranks 1825th for Downfall specifically. This places it in the 49th percentile of all tested combos, meaning roughly half of the tested systems perform better and half perform worse. The rank reflects the balance between the Ryzen 7 5700X3D's solid CPU performance and the RTX 5060's mid-range GPU capability. The CPU's 8 cores and 16 threads, combined with 96 MB of shared L3 cache, provide strong gaming performance, but the RTX 5060's 8 GB of GDDR7 memory and 128-bit bus width limit its ability to handle the most demanding 4K scenarios.
The benchmark scores support this positioning. The CPU's average benchmark score of 24709 places it above the 77th percentile of all CPUs, while the GPU's average benchmark score of 26331 places it at the 72nd percentile of all GPUs. Neither component is exceptionally high-end, but both are solidly above average, which explains the mid-pack ranking for this specific game.
The Verdict
The data clearly indicates that this system can run Downfall at playable frame rates, defined as 60 FPS or higher, across most configurations. At 1920x1080, all four settings presets—Low, Medium, High, and Ultra—clear the 60 FPS threshold. The Ultra preset averages 101.3 FPS, providing a comfortable margin. At 2560x1440, the same situation applies: all presets are playable, with Ultra averaging 74.8 FPS. At 3840x2160, three of the four presets are playable: High (74.2 FPS), Medium (84.7 FPS), and Low (104.2 FPS). The Ultra preset at 4K falls short at 43.1 FPS, which is below the playable threshold.
The verdict by resolution confirms this analysis. At 1080p and 1440p, the best playable setting is Ultra, with average frame rates of 101.3 and 74.8 FPS respectively. At 4K, the best playable setting is High, averaging 74.2 FPS. This means that for 4K gaming, users should avoid the Ultra preset unless they are willing to accept sub-60 FPS performance.
Measured FPS Breakdown
The measured FPS data provides a complete picture of performance across all tested configurations. At 1920x1080, the Low preset delivers an average of 237.8 FPS, which is the highest frame rate recorded in the entire test suite. Medium produces 195.2 FPS, High produces 158.8 FPS, and Ultra produces 101.3 FPS. The minimum and maximum FPS values were not recorded, so only average values are available for analysis.
At 2560x1440, the Low preset averages 169 FPS, Medium averages 137.6 FPS, High averages 114 FPS, and Ultra averages 74.8 FPS. The step-down from Low to Medium is 31.4 FPS, from Medium to High is 23.6 FPS, and from High to Ultra is 39.2 FPS. The largest single drop occurs when moving from High to Ultra, which indicates that the Ultra preset introduces a significant additional GPU workload.
At 3840x2160, the Low preset averages 104.2 FPS, Medium averages 84.7 FPS, High averages 74.2 FPS, and Ultra averages 43.1 FPS. The drop from High to Ultra is 31.1 FPS, which is the largest gap at this resolution. This substantial decrease explains why Ultra at 4K fails to meet the 60 FPS playable threshold.
Best Settings per Resolution
For 1920x1080, the Ultra preset is the most demanding option that stays at or above 60 FPS, averaging 101.3 FPS. This provides a substantial buffer above the 60 FPS threshold, making it the recommended setting for users with 1080p displays. The High preset at 158.8 FPS and Medium at 195.2 FPS are also viable options for users who prefer higher frame rates.
For 2560x1440, the Ultra preset also qualifies as the best playable setting, averaging 74.8 FPS. This is above the 60 FPS threshold but with less headroom than at 1080p. Users who want more margin could select High at 114 FPS, but Ultra remains playable and delivers the highest visual quality.
For 3840x2160, the High preset is the most demanding playable option, averaging 74.2 FPS. This is the recommended setting for 4K displays. The Medium preset at 84.7 FPS offers additional performance headroom, while the Low preset at 104.2 FPS provides the highest frame rates at this resolution. The Ultra preset at 43.1 FPS is not recommended for 4K due to its sub-60 FPS performance.