Downfall

The AMD Ryzen 7 5700X and NVIDIA GeForce RTX 2060 combination delivers a highly capable 1080p experience in Downfall, with all four tested presets clearing the 60 FPS threshold. The pairing is also strong at 1440p, where High settings average 84.8 FPS, and it manages to remain playable at 4K only when settings are reduced to Medium or Low. This analysis breaks down the recorded performance data, compares the components to their nearest hardware rivals, and explains which part of the system is doing the heavy lifting at each resolution.

Similar Performance Alternatives

The database places the AMD Ryzen 7 5700X in the 79th percentile among all tested CPUs, with an average benchmark score of 27578. The nearest rivals in the database are a tightly grouped set of processors. The Intel Core i5-12600K matches the Ryzen 7 5700X exactly with a score of 27578 and a delta of 0 percent. The AMD Ryzen 5 7600X scores 27636, which is 0.2 percent higher. The AMD Ryzen 7 5800 scores 27535, a 0.2 percent deficit. The Intel Core Ultra 5 125H scores 27507, trailing by 0.3 percent. For gaming workloads in Downfall, any of these CPUs would produce nearly identical frame rates when paired with the same GPU, as the performance differences are within a fraction of a percent.

On the graphics side, the NVIDIA GeForce RTX 2060 sits in the 58th percentile among all tested GPUs, with an average benchmark score of 15290. Its nearest rivals are a mix of older and newer hardware. The NVIDIA GeForce GTX 580 scores 15283, a 0 percent delta. The AMD Radeon 680M scores 15270, just 0.1 percent behind. The NVIDIA GeForce RTX 3050 OEM scores 15199, a 0.6 percent gap. The AMD Radeon RX 7600 scores 15171, trailing by 0.8 percent. For Downfall specifically, these GPU alternatives would deliver very similar average frame rates, although the RTX 2060's 6 GB of GDDR6 memory and 336.0 GB/s bandwidth provide the baseline for the measured results in this article.

CPU and GPU Roles

The measured FPS data shows a clear pattern where the GPU becomes the dominant bottleneck as resolution increases, while the CPU's influence is most noticeable at lower resolutions and higher frame rates. At 1920x1080, the frame rates are exceptionally high, ranging from 71.6 FPS at Ultra to 173.5 FPS at Low. These numbers indicate that the Ryzen 7 5700X, with its 8 cores and 16 threads, has enough single-thread and multi-thread performance to keep the RTX 2060 well fed. The CPU's 3dmark single-thread score of 921 and passmark single-thread score of 3385 support this, as the processor is not limiting the GPU at these frame rates.

Moving to 2560x1440, the frame rates drop notably but remain strong. The gap between Low and Ultra settings narrows compared to 1080p, which is a typical sign of increasing GPU load. At 1440p Low, the system produces 123.7 FPS, while at Ultra it drops to 53.4 FPS. The RTX 2060 is now the primary factor in the performance difference between presets, as the resolution increase demands more from the graphics card's 1920 shading units and 48 ROPs.

At 3840x2160, the GPU is almost entirely responsible for the results. The frame rates compress into a range from 34.2 FPS at Ultra to 74.8 FPS at Low. The CPU's role is diminished because the GPU cannot generate enough frames for CPU limitations to matter. The 4K Ultra result of 34.2 FPS is well below the 60 FPS playable threshold, while 4K Low at 74.8 FPS and 4K Medium at 60.6 FPS both cross the line. The scaling between resolutions and presets confirms that Downfall is heavily GPU-bound at higher resolutions, and the RTX 2060's performance ceiling is reached at 4K Ultra.

Measured FPS Breakdown

The database includes only average frame rate measurements for this combination, with no minimum or maximum values recorded. The complete set of results is as follows.

At 1920x1080, the system achieves its highest performance. Low settings produce 173.5 FPS, Medium settings produce 145.8 FPS, High settings produce 116.7 FPS, and Ultra settings produce 71.6 FPS. Every preset at 1080p clears the 60 FPS playable threshold by a wide margin, with even the most demanding Ultra preset maintaining 71.6 FPS.

At 2560x1440, performance remains strong but shows a larger spread between presets. Low settings average 123.7 FPS, Medium settings average 101.3 FPS, High settings average 84.8 FPS, and Ultra settings drop to 53.4 FPS. The Ultra preset at 1440p falls below the 60 FPS threshold, making it the only non-playable setting at this resolution.

At 3840x2160, the RTX 2060 is pushed to its limits. Low settings average 74.8 FPS, Medium settings average 60.6 FPS, High settings average 50.9 FPS, and Ultra settings average 34.2 FPS. Only Low and Medium presets clear the 60 FPS line at 4K, and High falls short with 50.9 FPS.

The data also reveals the performance cost of each preset tier. At 1080p, moving from Low to Medium costs 27.7 FPS, from Medium to High costs 29.1 FPS, and from High to Ultra costs 45.1 FPS. At 4K, the same transitions cost 14.2 FPS, 9.7 FPS, and 16.7 FPS respectively. The smaller absolute drops at 4K confirm that the GPU is already saturated and cannot make up the difference when settings are increased.

The Verdict

This PC can run Downfall, but the answer depends heavily on the target resolution and preset. At 1920x1080, the system clears 60 FPS at every setting, with Ultra at 71.6 FPS being the best playable option. For users with 1080p displays, this combination delivers a fully smooth experience with no compromises needed.

At 2560x1440, the verdict is also positive, but with one caveat. High, Low, and Medium presets all clear 60 FPS, with High at 84.8 FPS being the best playable setting. Ultra at 1440p drops to 53.4 FPS, which falls below the 60 FPS threshold. Users at 1440p should stick to High settings for the optimal balance of visual quality and frame rate.

At 3840x2160, the system is only partially playable. Low at 74.8 FPS and Medium at 60.6 FPS both clear 60 FPS, with Medium being the best playable setting. High at 50.9 FPS and Ultra at 34.2 FPS do not meet the playable threshold. The recorded data suggests that 4K gaming with this hardware requires dropping to Medium settings or lower to maintain smooth performance.

The verdict by resolution from the database confirms these findings. At 3840x2160, the playable settings are Low and Medium, with Medium being the best at 60.6 FPS. At 2560x1440, High, Low, and Medium are playable, with High being the best at 84.8 FPS. At 1920x1080, all four presets are playable, with Ultra being the best at 71.6 FPS.

FAQ

Q: Can the AMD Ryzen 7 5700X and NVIDIA GeForce RTX 2060 run Downfall at 1080p?

A: Yes, the system clears 60 FPS at all four tested presets. Low averages 173.5 FPS, Medium averages 145.8 FPS, High averages 116.7 FPS, and Ultra averages 71.6 FPS.

Q: What is the best playable setting at 1440p?

A: High settings are the best playable option at 2560x1440, with an average of 84.8 FPS. Ultra at 1440p drops to 53.4 FPS, which is below the 60 FPS threshold.

Q: Is 4K gaming possible with this combination?

A: Yes, but only at Low and Medium settings. Low averages 74.8 FPS and Medium averages 60.6 FPS. High at 50.9 FPS and Ultra at 34.2 FPS do not reach 60 FPS.

Q: How does the RTX 2060 compare to its nearest GPU rivals?

A: The RTX 2060 has an average benchmark score of 15290. The NVIDIA GeForce GTX 580 scores 15283, the AMD Radeon 680M scores 15270, the NVIDIA GeForce RTX 3050 OEM scores 15199, and the AMD Radeon RX 7600 scores 15171. All of these are within 0.8 percent of the RTX 2060.

Q: How does the Ryzen 7 5700X compare to its nearest CPU rivals?

A: The Ryzen 7 5700X has an average benchmark score of 27578. The Intel Core i5-12600K matches it exactly, the AMD Ryzen 5 7600X is 0.2 percent higher, the AMD Ryzen 7 5800 is 0.2 percent lower, and the Intel Core Ultra 5 125H is 0.3 percent lower.

Q: What is the best playable setting at 4K?

A: Medium settings are the best playable option at 3840x2160, with an average of 60.6 FPS. Low also clears the threshold at 74.8 FPS, but Medium offers better visual quality while staying just above 60 FPS.

How This Combo Ranks

Within the database of tested hardware combinations for Downfall, this pairing of the AMD Ryzen 7 5700X and NVIDIA GeForce RTX 2060 ranks 2936 out of 3716 total combinations. This places it in the lower portion of the overall ranking, which is consistent with the GPU's 58th percentile standing among all tested graphics cards. The CPU component is stronger, sitting in the 79th percentile, but the combination's rank is pulled down by the GPU's more modest position.

The ranking context matters when interpreting the FPS results. The system performs well at 1080p and 1440p, but the 4K results reveal the GPU's limitations. The RTX 2060's 6 GB of GDDR6 memory and 192-bit memory bus provide enough bandwidth for 1080p and 1440p gaming, but the 4K Ultra result of 34.2 FPS shows that this card is not designed for maximum settings at the highest resolution. The combination's rank of 2936 out of 3716 reflects this mixed capability: excellent for 1080p, good for 1440p, and only marginal for 4K.

Users considering this hardware for Downfall should base their expectations on the resolution of their display. For 1080p and 1440p, the system delivers smooth, playable performance across most presets. For 4K, the data shows that Medium settings are the ceiling for maintaining 60 FPS.