Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

86%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
367 FPS
Ultra 1080p Measured
190 FPS

1440p (2K / QHD)

Low 1440p Measured
323 FPS
Ultra 1440p Measured
135 FPS

4K (Ultra HD)

Low 4K Measured
201 FPS
Ultra 4K Measured
84 FPS
3.3ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 27,051
Graphics Card
Required 27,400
Your GPU 79,842

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 84 135 164 201
1440p QHD 135 217 264 323
1080p Full HD 190 303 342 367

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 303
1920x1080 Low 367
1920x1080 Medium 342
1920x1080 Ultra 190
2560x1440 High 217
2560x1440 Low 323
2560x1440 Medium 264
2560x1440 Ultra 135
3840x2160 High 135
3840x2160 Low 201
3840x2160 Medium 164
3840x2160 Ultra 84

Performance Analysis: Downfall on Your System

The AMD Ryzen 7 5700G paired with the NVIDIA GeForce RTX 5090 is a lopsided combination: an eight-core Zen 3 CPU built for efficiency meets a flagship Blackwell GPU with 32 GB of GDDR7 memory and a 104.8 TFLOPS FP32 throughput. When running Downfall, a 2016 horror title, this pairing produces frame rates that far exceed the 60 FPS playable threshold at every tested resolution, with the RTX 5090 clearly dominating the workload. The data reveals that even at 4K Ultra, the system maintains an 84 FPS average, while the CPU’s nearest rivals in synthetic benchmarks show it is a mid-range part that rarely becomes the bottleneck in this game.

Similar Performance Alternatives

For the CPU, the AMD Ryzen 7 5700G’s average benchmark score of 27051 places it within a tight cluster of rivals, all within a 1% delta. The Intel Core i9-9900K scores 27097, a mere 0.2% higher, indicating near-identical multi-threaded performance in general workloads. The AMD Ryzen AI 7 445 trails by only 0.4% with a score of 26936, while the Intel Core i5-14400T leads by 0.4% at 27166. The Intel Core i7-1370P completes the group at 26900, 0.6% behind. This level of parity means that swapping the 5700G for any of these four processors would yield almost no observable difference in Downfall’s frame rates, given that the GPU is the primary driver. The 5700G’s 79th percentile ranking among all CPUs reinforces that it sits comfortably in the upper-middle tier, but its 16 MB of L3 cache and DDR4 memory support do not represent a performance ceiling for this horror title.

On the GPU side, the RTX 5090’s average score of 79842 positions it alongside a curious set of rivals. The NVIDIA Tesla P100 PCIe 16 GB scores 79605, only 0.3% lower, while the Tesla P100 PCIe 12 GB is 0.6% behind at 79396. The AMD Radeon RX 6850M XT lags by 1.1% with 78940, and the AMD Radeon Pro Vega 64X actually leads by 1.4% with 80959. These deltas are negligible in real-world gaming, meaning a system with any of these GPUs would produce nearly identical frame rates in Downfall. However, the RTX 5090’s 92nd percentile among all GPUs and its massive 32 GB frame buffer give it a distinct advantage in memory-heavy scenarios, though Downfall’s modest requirements do not exploit this. The practical takeaway is that both the CPU and GPU have direct peers within 1.4% performance, so this combination behaves like many other high-end pairings.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays above 60 FPS is Ultra, which delivers an average of 190 FPS. This is the highest quality setting available, and the data shows no reason to drop below it. The Medium preset produces 342 FPS average with a minimum of 290 and maximum of 393, while Low reaches 367 FPS and High hits 303 FPS. All four presets clear the 60 FPS threshold by a wide margin, but Ultra is the clear choice for maximum visual fidelity without sacrificing smoothness.

Moving to 2560x1440, the best setting remains Ultra, with an average of 135 FPS. The resolution increase reduces performance compared to 1080p, but the margin is still substantial. High averages 217 FPS, Medium 264 FPS with a 225 minimum and 304 maximum, and Low 323 FPS. Again, every preset is playable, but Ultra’s 135 FPS average is more than double the playable threshold, so there is no compromise needed.

At 3840x2160, the pattern continues with Ultra as the best playable setting, averaging 84 FPS. This is the only resolution where the Ultra preset dips closer to the 60 FPS line, but it still clears it by 24 frames. High averages 135 FPS, Medium 164 FPS with a 140 minimum and 189 maximum, and Low 201 FPS. The 4K Ultra result is the weakest performance point in the entire dataset, yet it remains comfortably playable. For users prioritizing frame rate over visuals, even 4K Low at 201 FPS would be an option, but the data supports Ultra as the optimal balance.

CPU and GPU Roles

The benchmark results indicate that the RTX 5090 is the overwhelming performance determinant across all resolutions and presets. The CPU’s synthetic scores — such as 12830.5 in Cinebench R23 multi-core and 1494 in single-core — suggest a capable processor, but Downfall’s demands are clearly GPU-bound. Evidence comes from the scaling between resolutions: at 1080p Ultra, the system hits 190 FPS, dropping to 135 FPS at 1440p and 84 FPS at 4K. This 55.7% reduction from 1080p to 4K is entirely attributable to the GPU’s rendering load, as the CPU’s workload per frame does not change with resolution.

Similarly, the preset scaling shows the GPU’s dominance. At 4K, moving from Low to Ultra reduces average FPS from 201 to 84, a 58.2% drop. At 1440p, the same preset shift goes from 323 to 135, a 58.2% drop as well. At 1080p, it goes from 367 to 190, a 48.2% drop. These consistent reductions across resolutions indicate that the GPU’s shading units, TMUs, and ROPs are the limiting factor, not the CPU’s 8 cores and 16 threads. The Ryzen 7 5700G’s 3.80 GHz base and 4.60 GHz boost clocks, while modest, are sufficient to feed the RTX 5090 even at 1080p Low where 367 FPS is achieved. The divergence between resolutions is uniform, suggesting that the CPU is never saturated; if it were, the frame rate would plateau at lower resolutions. The 5700G’s 79th percentile ranking and its benchmark parity with the i9-9900K further imply that it is not a bottleneck in this scenario.

The Verdict

This PC can absolutely run Downfall, and the data confirms it exceeds the 60 FPS playable threshold at every resolution and preset combination tested. At 3840x2160, the verdict marks High, Low, Medium, and Ultra all as playable, with the best settings being Ultra at an 84 FPS average. At 2560x1440, all four presets are playable, with Ultra at 135 FPS as the best choice. At 1920x1080, the same holds true, with Ultra at 190 FPS. The system never falls below 84 FPS in any measured configuration, which is 40% above the 60 FPS threshold even in the worst case. The minimum frame rates recorded — 140 FPS at 4K Medium, 225 FPS at 1440p Medium, and 290 FPS at 1080p Medium — reinforce that there are no noticeable stutters or drops that would compromise the experience. For a horror game where smoothness is critical to atmosphere, this combination delivers flawless performance. The only consideration is that the RTX 5090’s 32 GB of GDDR7 memory is vastly overprovisioned for Downfall, but this does not detract from the playability verdict.

FAQ

Q: Can this system maintain 60 FPS at 4K with the highest settings?

A: Yes, at 3840x2160 with Ultra settings, the average FPS is 84, which is 24 frames above the playable threshold of 60 FPS.

Q: What is the fastest preset at 1080p?

A: The Low preset at 1920x1080 delivers the highest average frame rate of 367 FPS, though Medium and High also exceed 300 FPS.

Q: Is the CPU or GPU more important for Downfall performance?

A: The GPU is the dominant factor, as shown by consistent FPS drops when increasing resolution or preset quality, while the CPU’s performance remains sufficient across all tests.

Q: Does the system ever drop below 60 FPS in any tested configuration?

A: No, the lowest recorded average is 84 FPS at 4K Ultra, and the lowest minimum FPS is 140 at 4K Medium, so all configurations stay above 60 FPS.

Q: How does the RTX 5090 compare to its nearest rival in benchmarks?

A: The RTX 5090’s average score of 79842 is 0.3% higher than the NVIDIA Tesla P100 PCIe 16 GB, but 1.4% lower than the AMD Radeon Pro Vega 64X.

Q: What is the best quality setting at 1440p?

A: Ultra at 2560x1440 provides an average of 135 FPS, which is the highest preset and still more than double the 60 FPS threshold.

How This Combo Ranks

Among 3716 tested combinations in Downfall, this pairing of the AMD Ryzen 7 5700G and NVIDIA GeForce RTX 5090 ranks 144th. This places it in the top 3.9% of all tested systems, which is a strong result given that the CPU is a mid-range part from 2021 while the GPU is a 2025 flagship. The rank reflects the GPU’s overwhelming contribution to frame rates, as the 5700G’s 79th percentile CPU score is offset by the RTX 5090’s 92nd percentile GPU score. The 144th position suggests that there are 143 combinations that perform better, likely featuring newer high-end CPUs paired with the same or similar GPUs. However, given that the RTX 5090 is already one of the fastest GPUs available, the gap between rank 144 and the top spot is attributable to CPU differences, which have minimal impact on Downfall’s frame rates. In practical terms, this combo delivers near-top-tier performance, and the rank would be even higher in games that are more GPU-bound.

Measured FPS Breakdown

At 1920x1080, the full range of settings shows consistently high performance. Low averages 367 FPS, High 303 FPS, Medium 342 FPS with a minimum of 290 and maximum of 393, and Ultra 190 FPS. The Medium preset’s variance of 103 FPS between min and max is the widest at this resolution, indicating some scene-dependent fluctuation, but the floor remains far above playable. At 2560x1440, Low averages 323 FPS, High 217 FPS, Medium 264 FPS with a 225 minimum and 304 maximum, and Ultra 135 FPS. The drop from 1080p to 1440p is most pronounced at Low (367 to 323, a 12% reduction) and least at Ultra (190 to 135, a 28.9% reduction), showing that higher settings compress the resolution penalty. At 3840x2160, Low averages 201 FPS, High 135 FPS, Medium 164 FPS with a 140 minimum and 189 maximum, and Ultra 84 FPS. The 4K Ultra result is the single lowest data point, but it still represents a 40% margin over the 60 FPS threshold. The Medium preset at 4K shows a 49 FPS spread between min and max, which is the smallest variance of any Medium preset, suggesting that at higher resolutions the GPU’s workload becomes more uniform. Across all resolutions, the data shows a clear pattern: the RTX 5090 delivers playable frame rates at every setting, with Ultra being the recommended choice for visual quality at all three resolutions.