Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

62%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
174 FPS
Ultra 1080p Measured
73 FPS

1440p (2K / QHD)

Low 1440p Measured
124 FPS
Ultra 1440p Measured
52 FPS

4K (Ultra HD)

Low 4K Measured
77 FPS
Ultra 4K Measured
32 FPS
8.5ms Frame Time
13ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 27,051
Graphics Card
Required 27,400
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 52 63 77
1440p QHD 52 83 102 124
1080p Full HD 73 117 142 174

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 117
1920x1080 Low 174
1920x1080 Medium 142
1920x1080 Ultra 73
2560x1440 High 83
2560x1440 Low 124
2560x1440 Medium 102
2560x1440 Ultra 52
3840x2160 High 52
3840x2160 Low 77
3840x2160 Medium 63
3840x2160 Ultra 32

Performance Analysis: Downfall on Your System

The AMD Ryzen 7 5700G and NVIDIA GeForce RTX 2060 combination delivers a highly capable 1080p experience in Downfall, with performance scaling predictably as resolution increases. The recorded data shows this pairing handles the game’s horror atmosphere with smooth frame rates at most settings, though 4K Ultra remains out of reach. The measurements reveal a clear hierarchy of performance across the three tested resolutions.

Measured FPS Breakdown

At 1920x1080, the combination produces its strongest results. The Low preset averages 174 FPS, which is the highest frame rate recorded for this pairing in any configuration. The Medium preset averages 142 FPS, with a minimum of 121 FPS and a maximum of 164 FPS, indicating a stable experience even during demanding scenes. High settings average 117 FPS, while the Ultra preset, the most demanding configuration tested, still maintains a solid 73 FPS average. Every preset at 1080p clears the 60 FPS playability threshold by a wide margin.

Moving to 2560x1440, performance remains strong but shows the expected cost of additional pixel rendering. Low settings average 124 FPS. Medium averages 102 FPS, with the minimum recorded at 86 FPS and the maximum at 117 FPS. High settings average 83 FPS, which remains comfortably above the playability threshold. The Ultra preset drops to an average of 52 FPS, falling below the 60 FPS threshold and marking the first configuration where this pairing struggles.

At 3840x2160, the demands of 4K rendering become apparent. Low settings average 77 FPS, which is still playable. Medium settings average 63 FPS, with a minimum of 54 FPS and a maximum of 73 FPS, placing it just above the 60 FPS threshold on average. High settings drop to 52 FPS, and Ultra falls to 32 FPS. The data shows a steep decline in performance as settings increase at this resolution, with only Low and Medium presets maintaining playable averages.

FAQ

Q: Can this PC run Downfall at 1920x1080 with all settings maxed out?

A: Yes. The Ultra preset at 1920x1080 averages 73 FPS, which clears the 60 FPS playability threshold. The database lists Ultra as one of the playable settings at this resolution.

Q: What is the best settings preset for 2560x1440?

A: High is the best playable preset at 2560x1440, averaging 83 FPS. The Ultra preset averages 52 FPS, which falls below the 60 FPS threshold and is therefore not listed as playable.

Q: Is 4K gaming viable with this hardware?

A: Partially. At 3840x2160, Low averages 77 FPS and Medium averages 63 FPS, with Medium being the best playable preset. High and Ultra presets average 52 FPS and 32 FPS respectively, which are not playable.

Q: How much performance is lost when moving from 1080p to 1440p?

A: The data shows a consistent drop. At High settings, the average falls from 117 FPS at 1920x1080 to 83 FPS at 2560x1440. At Medium settings, the average falls from 142 FPS to 102 FPS.

Q: What minimum FPS can be expected at Medium settings?

A: The recorded minimums are 121 FPS at 1920x1080, 86 FPS at 2560x1440, and 54 FPS at 3840x2160. The 4K minimum dips below the 60 FPS threshold even though the average remains playable.

Q: Does the Ultra preset ever reach 60 FPS on this system?

A: Only at 1920x1080, where it averages 73 FPS. At 2560x1440 it averages 52 FPS, and at 3840x2160 it averages 32 FPS, both below the threshold.

CPU and GPU Roles

The scaling between resolutions reveals how the workload shifts between the AMD Ryzen 7 5700G and the NVIDIA GeForce RTX 2060. At 1920x1080, the CPU has more influence on the upper frame rate ceiling. The Low preset reaches 174 FPS, a figure that demands strong processor throughput to feed the GPU. The Ryzen 7 5700G, with its 8 cores and 16 threads, provides ample headroom here. Its Cinebench R23 multi-core score of 12830.5 and PassMark multi-thread score of 24419 indicate a processor well suited to high-refresh scenarios.

As resolution increases to 2560x1440 and 3840x2160, the GPU becomes the limiting factor. The frame rate drops at each step, even when the CPU workload remains similar. At 4K Low, the average is 77 FPS, less than half of the 1080p Low result. This pattern is typical of a GPU-bound scenario, where the RTX 2060’s rendering throughput dictates performance. The GPU’s 6 GB of GDDR6 memory and 336.0 GB/s bandwidth are sufficient for the game, but the 4K pixel count overwhelms its 1920 shading units.

The 1080p to 1440p transition shows a moderate decline, while the 1440p to 4K transition is more severe. High settings drop from 117 FPS at 1080p to 83 FPS at 1440p, a reduction of 34 FPS, then to 52 FPS at 4K, another reduction of 31 FPS. The Ultra preset tells a similar story: 73 FPS at 1080p, 52 FPS at 1440p, and 32 FPS at 4K. These figures suggest that the RTX 2060 is the primary constraint at higher resolutions, while the Ryzen 7 5700G keeps the system fed at lower resolutions.

The gap between Low and Ultra settings also widens with resolution. At 1080p, the difference between Low and Ultra is 101 FPS. At 1440p, the difference is 72 FPS. At 4K, the difference is 45 FPS. This compression of the frame rate range at higher resolutions further confirms that GPU limits dominate, as the CPU has less influence when the GPU is saturated.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 7 5700G provide context for its role in this pairing. The Intel Core i9-9900K has an average benchmark score of 27097, which is 0.2% higher than the Ryzen 7 5700G’s average of 27051. The AMD Ryzen AI 7 445 scores 26936, 0.4% lower. The Intel Core i5-14400T scores 27166, 0.4% higher. The Intel Core i7-1370P scores 26900, 0.6% lower. These deltas are all within one percentage point, meaning any of these processors would deliver nearly identical frame rates in this game when paired with the RTX 2060. The Ryzen 7 5700G sits at the 79th percentile among all CPUs, indicating solid mid-to-high-end positioning.

For the NVIDIA GeForce RTX 2060, the nearest rivals are equally close. The NVIDIA GeForce GTX 580 scores 15283, essentially identical to the RTX 2060’s 15290 average with a 0% delta. The AMD Radeon 680M scores 15270, 0.1% lower. The NVIDIA GeForce RTX 3050 OEM scores 15199, 0.6% lower. The AMD Radeon RX 7600 scores 15171, 0.8% lower. The RTX 2060 sits at the 58th percentile among all GPUs. These rivals would produce nearly the same measured FPS in Downfall, given the tiny benchmark score differences. A system with the Ryzen 7 5700G and any of these GPUs would behave almost indistinguishably from the tested configuration.

The Verdict

This PC can run Downfall, but the playable settings depend heavily on the chosen resolution. At 1920x1080, the database confirms that all four presets are playable, with Ultra averaging 73 FPS and Low reaching 174 FPS. This is the resolution where the combination is most comfortable, offering smooth performance even at maximum settings.

At 2560x1440, three presets are playable: High at 83 FPS, Low at 124 FPS, and Medium at 102 FPS. The Ultra preset falls short at 52 FPS. Users with 1440p displays should stick to High for the best visual quality while maintaining a comfortable frame rate.

At 3840x2160, only Low and Medium are playable, with averages of 77 FPS and 63 FPS respectively. Medium is the best choice, but its minimum of 54 FPS means occasional dips below the threshold. High and Ultra are not viable at this resolution. The verdict is clear: this is a strong 1080p machine for Downfall, a capable 1440p machine with settings compromises, and a limited 4K machine restricted to lower presets.

How This Combo Ranks

The combination of the AMD Ryzen 7 5700G and NVIDIA GeForce RTX 2060 ranks 2937 out of 3716 tested combinations in the database for Downfall. This places it in the lower-middle portion of all tested systems, which is surprising given the strong 1080p results. The ranking reflects the full spectrum of hardware tested, including far more powerful GPUs that dominate at 4K and high refresh rates. The percentile position of the individual components supports this: the CPU sits at the 79th percentile, while the GPU sits at the 58th percentile. The GPU is the weaker link in this pairing, and it drags the overall combo ranking down despite the processor’s solid standing. The data suggests that while this system excels at 1080p, it cannot compete with higher-tier GPU combinations in the database when resolution and settings increase.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 73 FPS. This delivers the full visual experience without sacrificing playability.

At 2560x1440, the most demanding playable preset is High, averaging 83 FPS. This provides a strong balance of visual fidelity and performance, leaving Ultra as the only non-playable option.

At 3840x2160, the most demanding playable preset is Medium, averaging 63 FPS. While the average clears the threshold, the recorded minimum of 54 FPS indicates some scenes will dip below 60 FPS, so users sensitive to frame drops may prefer Low at 77 FPS for a more consistent experience.