Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

90%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
482 FPS
Ultra 1080p Measured
202 FPS

1440p (2K / QHD)

Low 1440p Measured
345 FPS
Ultra 1440p Measured
144 FPS

4K (Ultra HD)

Low 4K Measured
214 FPS
Ultra 4K Measured
90 FPS
3.1ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 29,713
Graphics Card
Required 27,400
Your GPU 77,712

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 90 144 175 214
1440p QHD 144 231 282 345
1080p Full HD 202 324 395 482

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 324
1920x1080 Low 482
1920x1080 Medium 395
1920x1080 Ultra 202
2560x1440 High 231
2560x1440 Low 345
2560x1440 Medium 282
2560x1440 Ultra 144
3840x2160 High 144
3840x2160 Low 214
3840x2160 Medium 175
3840x2160 Ultra 90

Performance Analysis: Downfall on Your System

The AMD Ryzen 5 9600X paired with the NVIDIA GeForce RTX 5090 D delivers an extraordinary performance ceiling in Downfall, a horror title that clearly favors raw GPU throughput. Across every tested resolution, this combination not only clears the 60 FPS playability threshold but does so with massive headroom, allowing the most demanding visual preset at each resolution to run at frame rates typically reserved for high-refresh-rate displays. The data indicates a system that is essentially unburdened by the game’s demands, with the RTX 5090 D’s immense compute resources and the Ryzen 5 9600X’s strong single-thread performance combining to produce a effortless experience. This analysis breaks down the exact measured frame rates, contextualizes the hardware’s standing against other tested combinations, and provides a clear verdict on what settings to use for an optimal experience.

Best Settings per Resolution

The benchmark data for Downfall shows that this CPU-GPU pairing can handle the Ultra preset at every resolution tested, which is the highest quality setting available in the measurement set. This is the most demanding preset that stays at or above 60 FPS, and it does so with substantial margin.

At 3840x2160 (4K), the Ultra preset delivers an average of 90 FPS. This is the most visually demanding configuration tested, and the system still nearly doubles the 60 FPS target. For players with a 4K display, this is the definitive setting to use, as it provides the maximum visual fidelity without any risk of dropping below the playable threshold. The High preset at this resolution runs at 144 FPS average, which is 60% faster than Ultra, but the Ultra preset’s 90 FPS is already sufficient for a smooth, immersive horror experience.

Moving to 2560x1440 (1440p), the Ultra preset achieves an average of 144 FPS. This is a perfect match for 144Hz monitors, offering both maximum quality and fluid motion. The gap between Ultra and the next step down, High, is significant, with High running at 231 FPS average, but Ultra’s 144 FPS is the optimal balance for this resolution. The data clearly shows that there is no reason to compromise on settings at 1440p, as the hardware has ample performance to spare.

At 1920x1080 (1080p), the Ultra preset reaches an average of 202 FPS. This is well beyond the 60 FPS threshold and is ideal for high-refresh-rate 1080p panels. The Low preset hits 482 FPS average, but that is unnecessary for practical play. The Ultra setting at 1080p provides the best visual experience while still delivering over three times the minimum required frame rate. The verdict data confirms that all four tested presets (Low, Medium, High, Ultra) are playable at all three resolutions, but the Ultra preset is the clear recommendation for its combination of image quality and frame rate.

FAQ

*Q: Can this PC run Downfall at 4K with maximum settings?*

A: Yes. According to the measured FPS data, the Ultra preset at 3840x2160 produces an average frame rate of 90 FPS, which is well above the 60 FPS playable threshold. All four presets are marked as playable at this resolution.

Q: What is the best setting for 1440p gaming with this hardware?

A: The Ultra preset is the best choice at 2560x1440, as it delivers an average of 144 FPS. This provides the highest visual quality while maintaining a frame rate that is perfectly suited for 144Hz displays. Lowering to High would increase the average to 231 FPS, but the visual compromise is unnecessary given the Ultra preset’s performance.

Q: How does the frame rate scale from 1080p to 4K on the Ultra preset?

A: The Ultra preset averages 202 FPS at 1920x1080, 144 FPS at 2560x1440, and 90 FPS at 3840x2160. This represents a 55% reduction in average frame rate from 1080p to 4K, which is a typical scaling pattern for a graphically intensive title, but the absolute numbers remain exceptionally high at every resolution.

Q: Is the RTX 5090 D a bottleneck for the Ryzen 5 9600X in this game?

A: The benchmark results do not indicate a CPU bottleneck. The Ryzen 5 9600X has a single-thread benchmark score of 4,570 in Passmark and a Cinebench R23 single-core score of 2,183.5, which provides ample processing power. The GPU’s massive 32 GB GDDR7 memory and 104.8 TFLOPS FP32 performance are the primary drivers of the high frame rates seen in the data.

Q: What is the average FPS for the Medium preset at 1080p?

A: The Medium preset at 1920x1080 yields an average of 395 FPS, with a minimum of 335 FPS and a maximum of 454 FPS. This is the only preset besides Ultra at this resolution that has min/max data recorded, showing a consistent performance range.

Q: Does the game support high refresh rate monitors?

A: Yes, the data strongly supports this. At 1080p, the Ultra preset hits 202 FPS average, and at 1440p it hits 144 FPS average. Even at 4K, the High preset achieves 144 FPS average. This hardware can drive refresh rates well beyond standard 60Hz displays at all tested resolutions.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across all three resolutions and four settings. The dataset includes average frame rates for every combination, with additional min/max data for the Medium preset at each resolution.

At 1920x1080, the performance is exceptionally high across the board. The Low preset averages 482 FPS, which is the highest frame rate recorded in the entire dataset. The Medium preset averages 395 FPS, with a minimum of 335 FPS and a maximum of 454 FPS. The High preset brings the average down to 324 FPS. The Ultra preset, the most demanding, still manages an average of 202 FPS. The progression from Low to Ultra shows a 58% reduction in average frame rate, but even the lowest of these numbers is more than triple the 60 FPS playability threshold.

For 2560x1440, the performance remains stellar. The Low preset produces an average of 345 FPS. The Medium preset averages 282 FPS, with a minimum of 240 FPS and a maximum of 324 FPS. The High preset averages 231 FPS. The Ultra preset drops to an average of 144 FPS. This represents a 58% reduction from Low to Ultra, identical to the scaling observed at 1080p. The minimum frame rate recorded at this resolution, 240 FPS for the Medium preset, is still four times the playable threshold.

At 3840x2160, the performance is lower but still remarkably strong. The Low preset averages 214 FPS. The Medium preset averages 175 FPS, with a minimum of 149 FPS and a maximum of 202 FPS. The High preset averages 144 FPS. The Ultra preset delivers an average of 90 FPS. This is the only resolution where the Ultra preset falls below 100 FPS, but it still comfortably exceeds the 60 FPS target. The scaling from Low to Ultra at 4K shows a 58% reduction, consistent with the other resolutions, indicating that the game’s settings have a uniform impact on performance regardless of resolution.

The min/max data for the Medium preset shows tight frame time consistency. At 1080p, the range from min to max is 119 FPS (335 to 454). At 1440p, the range is 84 FPS (240 to 324). At 4K, the range is 53 FPS (149 to 202). This narrowing range with increasing resolution suggests that GPU load becomes more uniform at higher resolutions, reducing frame time variance.

How This Combo Ranks

In the database of tested combinations for Downfall, this specific pairing of AMD Ryzen 5 9600X and NVIDIA GeForce RTX 5090 D holds the rank of 2 out of 3,716 tested combos. This places it in the top 0.05% of all configurations tested for this game. The rank is a direct reflection of the measured FPS data, which shows that this combo can run the game at Ultra settings with an average of 90 FPS at 4K, a figure that only one other combination in the database surpasses.

The high rank is primarily attributable to the GPU’s performance. The RTX 5090 D has an average benchmark score of 77,712 and sits in the 92nd percentile of all GPUs. Its Passmark G3D score of 44,065 is exceptionally high. The CPU, while not the primary driver in this GPU-bound title, contributes with its 81st percentile ranking among all CPUs and an average benchmark score of 29,713. The combination of a top-tier GPU and a strong mid-range CPU is sufficient to achieve near-best performance in this game.

Being ranked 2nd means that only one other hardware combination produced higher average frame rates across the tested settings. The data indicates that this combo outperforms the vast majority of the 3,716 tested configurations, with only a single setup achieving a higher score. For context, the GPU’s nearest rivals, such as the AMD Radeon RX 6850M XT, have average benchmark scores that are 1.6% lower, which translates to a measurable but small performance gap. This rank confirms that the system is at the absolute top tier for playing Downfall.

Similar Performance Alternatives

For the CPU, the AMD Ryzen 5 9600X has an average benchmark score of 29,713. Its nearest rivals in the CPU benchmark database are all within a narrow performance band. The AMD Ryzen 7 PRO 5755GE has an average score of 29,656, which is 0.2% lower, making it virtually indistinguishable in performance. The AMD Ryzen 7 7840H scores 29,868, 0.5% higher, and the AMD Ryzen 7 5800XT scores 29,879, 0.6% higher. The AMD Ryzen 7 8845HS scores 29,955, 0.8% higher. These deltas are all under one percent, meaning that in Downfall, which is not CPU-bound at these settings, swapping the 9600X for any of these CPUs would produce no perceptible frame rate difference.

For the GPU, the NVIDIA GeForce RTX 5090 D has an average benchmark score of 77,712. Its nearest rivals show slightly larger performance deltas. The AMD Radeon RX 6650M XT has an average score of 76,904, which is 1.1% lower. The AMD Radeon RX 6850M XT scores 78,940, 1.6% higher. The NVIDIA Tesla P100 PCIe 12 GB scores 79,396, 2.1% higher, and the NVIDIA Tesla P100 PCIe 16 GB scores 79,605, 2.4% higher. In practical terms, these differences are small. A 2.4% higher GPU score might translate to a few extra frames per second in Downfall, but the measured FPS data shows this combo already runs the game at frame rates far exceeding the playable threshold. For instance, at 4K Ultra, a 2.4% increase would bring the average from 90 FPS to roughly 92 FPS, which is imperceptible in real-world gameplay.

The GPU’s nearest rivals are a mix of mobile and workstation parts, which may not be directly comparable in terms of system integration. However, the benchmark scores indicate that any of these GPUs would provide a very similar experience in Downfall, with the frame rate differences being well within the noise of typical gameplay variation. For users considering alternative hardware, the data suggests that the Ryzen 7 5800XT or Ryzen 7 8845HS for the CPU, and the AMD Radeon RX 6850M XT for the GPU, would deliver nearly identical performance to the reviewed combo.

The Verdict

The AMD Ryzen 5 9600X and NVIDIA GeForce RTX 5090 D can absolutely run Downfall, and the data shows it does so with exceptional proficiency. The verdict by resolution is unambiguous: at 3840x2160, the Ultra preset is playable with an average of 90 FPS. At 2560x1440, the Ultra preset is playable with an average of 144 FPS. At 1920x1080, the Ultra preset is playable with an average of 202 FPS. All four settings (Low, Medium, High, Ultra) are marked as playable at every resolution, meaning there is no configuration in the tested set that fails to meet the 60 FPS threshold.

The strongest verdict comes at 1440p, where the Ultra preset’s 144 FPS average is a perfect match for high-refresh-rate monitors. This is the sweet spot for this hardware, offering maximum visual quality at a frame rate that is smooth and responsive. At 4K, the 90 FPS average on Ultra is still excellent for a horror game, where atmospheric fidelity often matters more than competitive frame rates. The 1080p performance is so high that users with lower-resolution displays will likely be limited by their monitor’s refresh rate rather than the hardware’s capabilities.

In summary, this combination ranks 2nd out of 3,716 tested combos, placing it at the very apex of performance for Downfall. The GPU’s 92nd percentile ranking and the CPU’s 81st percentile ranking combine to create a system that is overkill for this title, but in the best possible way. There is no scenario in the tested data where this PC cannot run the game at its highest settings while maintaining frame rates well above the playable threshold. The only recommendation is to use the Ultra preset at all resolutions, as the performance headroom is more than sufficient to absorb the visual load. This is a top-tier configuration for Downfall.