Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

61%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
210 FPS
Ultra 1080p Measured
88 FPS

1440p (2K / QHD)

Low 1440p Measured
150 FPS
Ultra 1440p Measured
63 FPS

4K (Ultra HD)

Low 4K Measured
93 FPS
Ultra 4K Measured
39 FPS
7.1ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 25,005
Graphics Card
Required 27,400
Your GPU 16,014

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 63 76 93
1440p QHD 63 101 123 150
1080p Full HD 88 141 172 210

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 141
1920x1080 Low 210
1920x1080 Medium 172
1920x1080 Ultra 88
2560x1440 High 101
2560x1440 Low 150
2560x1440 Medium 123
2560x1440 Ultra 63
3840x2160 High 63
3840x2160 Low 93
3840x2160 Medium 76
3840x2160 Ultra 39

Performance Analysis: Downfall on Your System

The AMD Ryzen 5 8400F and AMD Radeon RX 9060 combination delivers a playable experience in Downfall at 4K with High settings, while offering headroom for higher presets at lower resolutions. The measured data shows that this pairing is capable of hitting 60 FPS at 1440p Ultra and 1080p Ultra, but the 4K Ultra preset falls below the playable threshold. The following analysis breaks down the system's behavior based on the benchmark results.

Similar Performance Alternatives

The AMD Ryzen 5 8400F sits in a tight performance cluster with several other processors, according to the average benchmark scores. The closest rival is the AMD Ryzen 5 7500F, which scores 24964 versus the 8400F's 25005, a negligible 0.2% difference. This means gaming performance in CPU-bound scenarios would be virtually indistinguishable. The Intel Core i7-11850H is 0.3% slower, and the Intel Core i7-13620H is 0.4% slower, both landing within a margin that would not produce a meaningful frame rate gap in Downfall. On the other side, the AMD EPYC 9474F is 0.4% faster, though its server-oriented design makes it an unlikely direct competitor for this gaming build. For practical purposes, swapping the 8400F for any of these alternatives would yield nearly identical CPU-driven performance in this horror title.

On the GPU side, the Radeon RX 9060's nearest rival is the NVIDIA GeForce RTX 3060 Ti, which scores 16129 against the RX 9060's 16014 — a 0.7% deficit for the AMD card. That places the two within a hair of each other, so users coming from an RTX 3060 Ti would see comparable frame rates in Downfall. The AMD Radeon R9 370X and AMD Radeon RX 7700 are both 1% behind the RX 9060, meaning the R9 370X — an older part — surprisingly lands nearly on par in aggregate compute benchmarks. The AMD Radeon Pro W5500 trails by 2.1%. When paired with the Ryzen 5 8400F, the RX 9060's performance profile suggests that any of these GPU alternatives would produce similar average FPS across the tested resolutions, with the RTX 3060 Ti being the most direct swap.

CPU and GPU Roles

The benchmark data reveals how the workload shifts between the CPU and GPU as resolution changes. At 1920x1080, the system produces 210 FPS on Low settings, which indicates that the GPU is not the primary limiter — the frame rate is high enough that CPU overhead and game logic become relatively more significant. Moving from 1080p Low to 1440p Low drops the average to 150 FPS, a 28.6% reduction, while 4K Low yields 93 FPS, another 38% drop. These large percentage declines with resolution scaling point to the GPU becoming progressively more dominant as pixel count rises.

The gap between Low and Ultra settings quantifies the GPU's role further. At 1080p, Low produces 210 FPS while Ultra produces 88 FPS, a 58% performance penalty for the highest preset. At 1440p, the same settings comparison shows 150 FPS versus 63 FPS, a 58% drop. At 4K, Low delivers 93 FPS and Ultra drops to 39 FPS, a 58% reduction. The consistency of this percentage across resolutions indicates that the GPU is the bottleneck at all tested settings, since the relative cost of Ultra versus Low does not shrink at higher resolutions. If the CPU were limiting, the Ultra preset would show a smaller relative penalty at 4K compared to 1080p.

However, the CPU still matters for maintaining high frame rates. The fact that 1080p Low reaches 210 FPS suggests the Ryzen 5 8400F's six Zen 4 cores with 12 threads are sufficient to feed the GPU at that level. The 8400F's Cinebench R23 multi-core score of 20851 and single-core score of 2943 place it in the 77th percentile of all CPUs, indicating strong headroom for this game's demands. The data shows that for Downfall, the GPU is the dominant factor across all resolutions and presets, but the CPU's capability ensures that low-resolution and low-preset scenarios do not become CPU-bound prematurely.

Measured FPS Breakdown

At 3840x2160, the system's performance varies widely by preset. Low settings produce an average of 93 FPS, which is comfortably above the 60 FPS playable threshold. Medium settings average 76 FPS with a minimum of 65 FPS and maximum of 88 FPS, meaning even the minimum stays playable. High settings average 63 FPS, just barely clearing the threshold. Ultra settings, however, drop to 39 FPS average, which is well below playable. The 4K data shows a clear pattern: the GPU can handle the game at High or lower, but Ultra demands more than the RX 9060 can deliver.

At 2560x1440, the results improve substantially. Low settings average 150 FPS, Medium averages 123 FPS with a minimum of 104 FPS and maximum of 141 FPS, and High averages 101 FPS. Ultra settings still produce a playable 63 FPS average, matching the 4K High result. This means 1440p Ultra is the most demanding preset that remains at or above 60 FPS at this resolution. The minimum FPS data for Medium shows a 104 FPS floor, which is 73% higher than the playable threshold, indicating smooth performance without dips near the danger zone.

At 1920x1080, the system shows its highest performance. Low settings average 210 FPS, Medium averages 172 FPS with a minimum of 146 FPS and maximum of 198 FPS, and High averages 141 FPS. Ultra settings average 88 FPS, which is 47% above the 60 FPS threshold. The minimum FPS at Medium is 146, so even the worst-case frame rate is more than double the playable threshold. The 1080p results confirm that this combination has substantial headroom for high-refresh-rate monitors at this resolution, as even Ultra stays well above 60 FPS.

FAQ

*Q: Can this system run Downfall at 4K with maximum settings?*

A: No. At 3840x2160 with Ultra settings, the average FPS is 39, which falls below the 60 FPS playable threshold. The most demanding playable preset at 4K is High, which averages 63 FPS.

Q: What is the highest preset that maintains 60 FPS at 1440p?

A: Ultra settings at 2560x1440 average 63 FPS, making it the most demanding preset that stays at or above the playable threshold at this resolution. Lower presets also work, with High at 101 FPS, Medium at 123 FPS, and Low at 150 FPS.

Q: How does the RX 9060 compare to the RTX 3060 Ti in this context?

A: The RX 9060 has an average benchmark score of 16014, while the RTX 3060 Ti scores 16129, a 0.7% difference. In practical terms for Downfall, this translates to nearly identical frame rates between the two GPUs.

Q: Is the Ryzen 5 8400F a bottleneck for the RX 9060 at 1080p?

A: The data suggests not. At 1920x1080 with Low settings, the system reaches 210 FPS, which indicates the CPU can keep up with the GPU's output at that resolution. The 8400F's 77th percentile ranking among all CPUs supports this.

Q: What is the minimum FPS at Medium settings across resolutions?

A: At 1920x1080, the minimum is 146 FPS. At 2560x1440, the minimum is 104 FPS. At 3840x2160, the minimum is 65 FPS. All of these stay well above the 60 FPS playable threshold.

Q: How does the CPU's multi-core performance affect this game?

A: The Ryzen 5 8400F scores 20851 in Cinebench R23 multi-core and 8757 in Cinebench R20 multi-core. These scores indicate strong multi-threaded capability, which helps maintain consistent frame rates, particularly at lower resolutions where CPU overhead is more visible.

How This Combo Ranks

The AMD Ryzen 5 8400F plus AMD Radeon RX 9060 combination ranks 2185 out of 3716 tested combos for Downfall. This places it in the 41st percentile of all tested configurations, meaning roughly 59% of setups perform better in this game. The rank reflects a mid-pack position, which aligns with the hardware's specifications: the CPU is in the 77th percentile among all CPUs, but the GPU is only in the 59th percentile among all GPUs. The GPU's lower relative standing drags the overall combo ranking down, since Downfall's performance is GPU-dominated according to the resolution scaling data.

The ranking suggests that while this system is fully capable of playing Downfall at the tested resolutions and presets, there are many faster combinations in the database. The 1531 combos ranked above this one likely feature more powerful GPUs, since the RX 9060's performance class is the limiting factor. However, the rank also indicates that this is not a weak setup — it sits above 1531 other tested combinations, and the measured FPS data confirms playability at 4K High, 1440p Ultra, and 1080p Ultra.

Best Settings per Resolution

At 3840x2160, the best settings that maintain at least 60 FPS are High, which achieves an average of 63 FPS. Medium also works at 76 FPS, and Low runs at 93 FPS, but High is the most demanding preset that clears the playable threshold. Ultra at 39 FPS is not viable.

At 2560x1440, Ultra settings deliver an average of 63 FPS, making it the best choice for this resolution. All presets are playable here, with High at 101 FPS, Medium at 123 FPS, and Low at 150 FPS, but Ultra provides the highest visual quality without sacrificing the 60 FPS target.

At 1920x1080, Ultra settings average 88 FPS, which is the best preset at this resolution. The system has enough headroom that even the most demanding settings stay 47% above the playable threshold. Lower presets are unnecessary for performance reasons, as High runs at 141 FPS, Medium at 172 FPS, and Low at 210 FPS, but Ultra offers the full visual experience while remaining well within playable territory.