Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

61%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
240 FPS
Ultra 1080p Measured
101 FPS

1440p (2K / QHD)

Low 1440p Measured
171 FPS
Ultra 1440p Measured
72 FPS

4K (Ultra HD)

Low 4K Measured
107 FPS
Ultra 4K Measured
45 FPS
6.2ms Frame Time
9ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 25,005
Graphics Card
Required 27,400
Your GPU 15,852

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 45 72 87 107
1440p QHD 72 115 140 171
1080p Full HD 101 161 196 240

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 161
1920x1080 Low 240
1920x1080 Medium 196
1920x1080 Ultra 101
2560x1440 High 115
2560x1440 Low 171
2560x1440 Medium 140
2560x1440 Ultra 72
3840x2160 High 72
3840x2160 Low 107
3840x2160 Medium 87
3840x2160 Ultra 45

Performance Analysis: Downfall on Your System

The AMD Ryzen 5 8400F paired with the AMD Radeon RX 7700 delivers a robust gaming experience in Downfall, with benchmark data showing that the combination handles modern resolutions with significant headroom. The measured FPS data reveals a system that scales predictably with both resolution and preset levels, offering playable performance even under demanding 4K Ultra settings, though it excels at lower resolutions. This analysis breaks down the measured performance metrics, component roles, and comparative standing of this hardware configuration.

Measured FPS Breakdown

At 3840x2160 (4K), the combination produces an average of 72 FPS on High settings, which comfortably exceeds the 60 FPS playability threshold. Dropping to Medium settings raises the average to 87 FPS, with a measured minimum of 74 FPS and a maximum of 100 FPS, indicating consistent frame pacing. Low settings at 4K yield an average of 107 FPS, while Ultra settings reduce performance to an average of 45 FPS, which falls below the playable threshold. The data shows a clear 27 FPS gap between High and Ultra at this resolution, suggesting the Ultra preset imposes a significant rendering load.

Moving to 2560x1440 (1440p), the performance envelope expands considerably. High settings deliver an average of 115 FPS, while Medium settings reach 140 FPS with a minimum of 119 FPS and a maximum of 161 FPS. Low settings at this resolution produce 171 FPS on average, and Ultra settings still maintain an average of 72 FPS, matching the 4K High result. The scaling from 4K to 1440p shows a 43 FPS improvement at High settings, demonstrating that resolution reduction provides substantial performance gains.

At 1920x1080 (1080p), the system demonstrates its peak capability. High settings average 161 FPS, while Medium settings reach 196 FPS with a minimum of 167 FPS and a maximum of 226 FPS. Low settings achieve 240 FPS on average, and Ultra settings still produce 101 FPS. The 1080p Ultra result is particularly notable, as it exceeds the 4K Medium average by only 14 FPS, highlighting how resolution scaling affects performance more than preset changes at this tier.

FAQ

Q: Can this system maintain 60 FPS at 4K with High settings?

A: Yes, the measured average FPS at 3840x2160 with High settings is 72 FPS, which exceeds the 60 FPS playability threshold by 12 FPS.

Q: What is the highest preset that achieves 60 FPS at 1440p?

A: Ultra settings at 2560x1440 produce an average of 72 FPS, making it the most demanding preset that remains playable at this resolution.

Q: How does 1080p Ultra compare to 4K Medium in terms of average FPS?

A: 1080p Ultra averages 101 FPS, while 4K Medium averages 87 FPS, yielding a 14 FPS advantage for the lower resolution with higher preset.

Q: Is the 4K Ultra preset playable with this hardware?

A: No, the average FPS at 3840x2160 with Ultra settings is 45 FPS, which is 15 FPS below the 60 FPS playability threshold.

Q: What is the minimum FPS recorded across all tested configurations?

A: The lowest minimum FPS recorded is 74 FPS, observed at 3840x2160 with Medium settings, which still remains above the playable threshold.

Q: Does the system scale better with resolution changes or preset changes?

A: The data shows resolution changes have a larger impact; for example, moving from 1080p High (161 FPS) to 1440p High (115 FPS) results in a 46 FPS drop, while moving from 1440p High to 1440p Ultra (72 FPS) results in a 43 FPS drop.

CPU and GPU Roles

The benchmark data indicates that the GPU becomes the primary bottleneck at higher resolutions, while the CPU maintains sufficient headroom across all tested configurations. At 1080p Low settings, the system reaches 240 FPS, suggesting the CPU can feed the GPU effectively at lower resolutions. However, as resolution increases to 1440p and 4K, the average FPS drops by 69 FPS and 133 FPS respectively at Low settings, indicating that the rendering load shifts to the GPU.

The scaling between presets at each resolution provides insight into component utilization. At 1080p, moving from Low to Ultra reduces average FPS from 240 to 101, a 58% decrease, while at 4K, the same preset change reduces FPS from 107 to 45, a 58% decrease as well. This consistent percentage drop across resolutions suggests the GPU is the limiting factor at all settings, with the CPU providing adequate processing power for the game's logic and physics.

The Ryzen 5 8400F's 6-core, 12-thread configuration with a boost clock of 4.70 GHz appears sufficient for Downfall's demands, as no configuration shows signs of CPU-induced frame drops. The GPU's 16 GB of GDDR6 memory and 256-bit bus width provide 624.1 GB/s of bandwidth, which likely contributes to stable performance at 4K Medium, where minimum FPS remains at 74. The data suggests that users targeting higher refresh rates should prioritize GPU upgrades, while CPU upgrades would yield diminishing returns for this title.

How This Combo Ranks

The combined AMD Ryzen 5 8400F and AMD Radeon RX 7700 configuration ranks 1735 out of 3716 tested combos for Downfall, placing it in the upper half of all tested systems. This percentile position reflects a balanced pairing that delivers consistent performance across all resolutions and presets. The combo's ability to maintain 60+ FPS at 4K High and 1440p Ultra places it above many configurations that struggle with 4K gaming.

The ranking data suggests that while this combo is not at the top tier, it offers a level of performance that exceeds the median tested system. The 4K Ultra result of 45 FPS is the only configuration that falls below the playable threshold, indicating that the hardware is well-matched for mainstream gaming scenarios. The rank of 1735 out of 3716 places this combo in the 53rd percentile, meaning it outperforms a slight majority of tested systems while remaining accessible in terms of hardware requirements.

Similar Performance Alternatives

The CPU's nearest rivals include the AMD Ryzen 5 7500F, which has an average benchmark score 0.2% higher, and the Intel Core i7-11850H, which scores 0.3% higher. The Intel Core i7-13620H performs 0.4% better, while the AMD EPYC 9474F scores 0.4% lower. These small deltas indicate that swapping the Ryzen 5 8400F for any of these processors would result in nearly identical gaming performance in Downfall.

On the GPU side, the AMD Radeon R9 370X scores 0.1% lower, while the AMD Radeon RX 9060 scores 1% lower. The AMD Radeon Pro W5500 performs 1.1% better, and the NVIDIA GeForce RTX 3060 Ti scores 1.7% higher. The RTX 3060 Ti's 1.7% advantage would translate to approximately 1-2 FPS difference at 4K High settings, making these alternatives effectively interchangeable for this game. Users considering upgrades should note that the RX 7700's nearest rivals are closely matched, with no single alternative offering a significant performance advantage.

The Verdict

The benchmark data confirms that this PC can run Downfall effectively across most configurations. At 3840x2160, the system achieves playable performance on High, Low, and Medium settings, with High being the best playable preset at 72 FPS average. The 4K Ultra preset falls short at 45 FPS, so users should avoid this configuration for smooth gameplay.

At 2560x1440, all four presets remain playable, with Ultra settings delivering 72 FPS average, which is the most demanding preset that clears the 60 FPS threshold. This makes 1440p the optimal resolution for experiencing the game's full visual fidelity while maintaining smooth performance.

At 1920x1080, every preset exceeds the playable threshold, with Ultra settings achieving 101 FPS average. This resolution provides the highest performance headroom, making it suitable for high refresh rate displays. The system's ability to maintain minimum FPS above 60 across all playable configurations indicates consistent performance without significant frame drops.

Best Settings per Resolution

At 3840x2160, the best playable settings are High, which produces an average of 72 FPS. This provides a comfortable margin above the 60 FPS threshold while offering enhanced visual quality over Medium settings.

At 2560x1440, the best playable settings are Ultra, achieving an average of 72 FPS. This allows users to experience the game at maximum quality without sacrificing smoothness, as the 72 FPS average exceeds the playability threshold by 12 FPS.

At 1920x1080, the best playable settings are Ultra, delivering an average of 101 FPS. This configuration provides the highest visual quality with substantial performance headroom, making it ideal for 144Hz displays or users who prefer maximum graphical fidelity.