Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 48 | 77 | 93 | 114 |
| 1440p QHD | 77 | 123 | 150 | 183 |
| 1080p Full HD | 108 | 172 | 210 | 257 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 5 7600X paired with the NVIDIA GeForce RTX 3070 delivers a robust performance profile for the horror title Downfall, with measured frame rates that comfortably exceed the 60 FPS playability threshold across most tested configurations. The data set, derived from direct measurements, covers three resolutions and four quality presets, revealing a system that is well-balanced for this game’s demands, particularly at lower resolutions where headroom is abundant.
Measured FPS Breakdown
At the native 4K resolution (3840x2160), the combination shows a clear tiering across presets. The Ultra setting is the only one that struggles, producing an average of 48 FPS, which falls below the playable threshold. Dropping to High yields a significant leap to 77 FPS, a 60% improvement over Ultra. The Medium preset averages 93 FPS, with a recorded minimum of 79 and a maximum of 107, suggesting a stable experience. The Low preset pushes performance higher to an average of 114 FPS, showcasing a strong scaling curve as settings are reduced.
Moving to 2560x1440, the system demonstrates even greater capability. The Ultra preset, which was unplayable at 4K, now achieves an average of 77 FPS, making it a viable option. The High preset averages 123 FPS, a substantial 60% increase over Ultra. Medium performance scales to an average of 150 FPS, with a min-max range of 127 to 172 FPS, indicating excellent consistency. The Low preset reaches an average of 183 FPS, providing an extremely high refresh rate experience.
At 1920x1080, the processor and graphics card combination reveals its full strength. The Ultra preset averages 108 FPS, which is a 125% jump from the 4K Ultra result. The High preset averages 172 FPS, while Medium hits 210 FPS with a min-max range of 179 to 242. The Low preset captures a maximum of 257 FPS on average, showcasing headroom for the most demanding competitive scenarios, though this is a single-player horror title.
Similar Performance Alternatives
Looking at the nearest rivals for the core components, several combinations would behave similarly in Downfall. For the CPU, the AMD Ryzen 5 7600X sits within a tight performance cluster. The AMD Ryzen 7 5700X and the Intel Core i5-12600K are nearly identical in average benchmark score, showing a delta of 0.2% from the 7600X. The AMD Ryzen 5 8500GE is marginally slower, at -0.3%, while the AMD Ryzen 7 5800 is slightly faster, at 0.4%. These differences are negligible in gaming workloads, meaning a system with any of these CPUs and the RTX 3070 would yield frame rates within a very narrow margin of what is measured.
On the GPU side, the AMD Radeon RX 7600 XT is the closest equivalent, with a delta of 0.7% in average benchmark score, which could translate to a one or two frame difference in Downfall. The NVIDIA GeForce GTX 690 and AMD Radeon HD 7970M are also listed as rivals with deltas of 1.0% and 1.1% respectively, but these are older architectures and would likely not match the modern feature set. The NVIDIA Tesla K40c is slower, with a -1.5% delta, making it a minor step down in performance.
Best Settings per Resolution
The most demanding preset that maintains an average of at least 60 FPS can be identified for each resolution from the measured data.
At 3840x2160, the best playable setting is High, which yields an average of 77 FPS. The Ultra preset falls short at 48 FPS, but High provides a smooth experience with a significant margin above the threshold.
At 2560x1440, the most demanding playable preset is Ultra, achieving an average of 77 FPS. This is a notable achievement, as it allows the game’s highest visual quality to be fully enjoyed without frame drops below the acceptable standard.
At 1920x1080, the Ultra preset is also the best choice, but with a far higher average of 108 FPS. This leaves ample room for dips in complex scenes while maintaining a comfortable frame rate.
The Verdict
The data confirms that this system can run Downfall effectively. At 3840x2160, the combination is playable on High, Low, and Medium settings, with the best setting being High at 77 FPS. The Ultra setting is not viable at this resolution. At 2560x1440, all four presets, including Ultra, are playable. The best setting is Ultra, with an average of 77 FPS. At 1920x1080, the entire preset range is playable, and the best setting is Ultra, which delivers a strong 108 FPS. Therefore, the answer is a qualified yes: this PC clears the 60 FPS bar at every resolution when using the correct preset, and only fails at maximum graphical fidelity in 4K.
CPU and GPU Roles
The scaling between resolutions reveals which component is more critical for Downfall. At 4K, the GPU is the primary bottleneck. The drop from 77 FPS at High to 48 FPS at Ultra shows a steep performance cost that the CPU cannot offset. The fact that 4K Medium and High presets show a difference of only 16 FPS (93 vs 77) further indicates that the GPU is pushing against its limits.
At 1440p, the system becomes more balanced. The ability to run Ultra at 77 FPS suggests the GPU has enough headroom, while the increase to 183 FPS at Low demonstrates the CPU’s ability to feed frames when the GPU load is lighter. The jump from 77 FPS at 1440p Ultra to 108 FPS at 1080p Ultra is a 40% gain, showing that the GPU is still the main limiter. However, the 1080p results, with 257 FPS at Low, indicate the CPU is not holding back performance in less demanding scenes.
For this game, the CPU plays a supporting role at high resolutions but becomes more relevant at lower settings. The GPU is the dominant component at all resolution levels, meaning an upgrade path for the graphics would yield the most performance benefit for high-fidelity 4K gaming. The CPU’s strength allows the GPU to run at its maximum output, especially at 1080p.
FAQ
Q: What is the average frame rate at 1440p with High settings?
A: The measured average is 123 FPS.
Q: Can this system run the game at 4K with the High preset?
A: Yes, the 4K High preset achieves an average of 77 FPS, which is above the 60 FPS playable threshold.
Q: Is the Ultra preset playable at 1080p?
A: Yes, the 1080p Ultra preset runs at an average of 108 FPS, making it fully playable.
Q: What is the best preset for 1440p that stays above 60 FPS?
A: The best is the Ultra preset, which has an average of 77 FPS.
Q: What are the minimum FPS values recorded for the Medium preset at 4K?
A: The recorded minimum is 79 FPS for the 4K Medium preset.
Q: Which component is more critical for performance at 4K?
A: The GPU is the bottleneck, as the frame rate drops significantly from High to Ultra settings.
How This Combo Ranks
Within the database of tested combinations for Downfall, this configuration ranks 1592 out of 3716 total combinations. This places it in the upper half of all systems tested, indicating that it is a stronger-than-average performer for this title. The rank is a direct reflection of its ability to maintain high frame rates at 1440p and 1080p, with the only limitation being the ultra-high-end 4K preset. The combination of the Ryzen 5 7600X and RTX 3070 is a well-matched pair for Downfall, offering a performance level that should satisfy most players seeking a smooth horror experience.