Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

63%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
210 FPS
Ultra 1080p Measured
88 FPS

1440p (2K / QHD)

Low 1440p Measured
150 FPS
Ultra 1440p Measured
63 FPS

4K (Ultra HD)

Low 4K Measured
93 FPS
Ultra 4K Measured
39 FPS
7.1ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 26,324
Graphics Card
Required 27,400
Your GPU 16,014

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 63 76 93
1440p QHD 63 101 123 150
1080p Full HD 88 141 172 210

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 141
1920x1080 Low 210
1920x1080 Medium 172
1920x1080 Ultra 88
2560x1440 High 101
2560x1440 Low 150
2560x1440 Medium 123
2560x1440 Ultra 63
3840x2160 High 63
3840x2160 Low 93
3840x2160 Medium 76
3840x2160 Ultra 39

Performance Analysis: Downfall on Your System

The AMD Ryzen 5 7600 paired with the AMD Radeon RX 9060 is capable of running Downfall at playable frame rates across most settings and resolutions, but the 4K Ultra preset falls short of the 60 FPS threshold. Measured data shows that the system delivers 88 FPS at 1080p Ultra, 63 FPS at 1440p Ultra, and 63 FPS at 4K High, while 4K Ultra drops to 39 FPS. The combination ranks 2185 out of 3716 tested configurations, placing it in the lower half of the field, yet the CPU and GPU individually hold respectable positions (CPU 78th percentile, GPU 59th percentile).

FAQ

Q: What is the average FPS at 1080p Ultra settings?

A: The measured average FPS at 1920x1080 with Ultra settings is 88 FPS, comfortably above the 60 FPS playable threshold.

Q: Can this system handle 4K Ultra?

A: No. At 3840x2160 Ultra, the average FPS is 39, which is below the 60 FPS threshold. The highest playable setting at 4K is High, with an average of 63 FPS.

Q: What are the min and max FPS at Medium settings?

A: At 1080p Medium, the range is 146–198 FPS (avg 172). At 1440p Medium, it is 104–141 FPS (avg 123). At 4K Medium, it is 65–88 FPS (avg 76). No min/max data is available for other presets.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 7600 has an average benchmark score of 26324. Its nearest rivals are the AMD Ryzen 9 6900HX (26274, +0.2%), the AMD Ryzen 7 7435HS (26402, –0.3%), the Intel Core i9-11900KF (26212, +0.4%), and the AMD Ryzen 5 8540U (26187, +0.5%). All are within 0.5% of the 7600's score.

Q: What is the GPU's percentile among all GPUs?

A: The Radeon RX 9060 sits in the 59th percentile of all GPUs, with an average benchmark score of 16014. Its nearest rival, the NVIDIA GeForce RTX 3060 Ti, scores 16129 (–0.7% delta).

Q: What is the combo's rank in this game?

A: The combination ranks 2185 out of 3716 tested combos, meaning it outperforms roughly 41% of all configurations tested for Downfall.

Similar Performance Alternatives

For the CPU, the Ryzen 5 7600's nearest rivals in benchmark performance are the AMD Ryzen 9 6900HX, AMD Ryzen 7 7435HS, Intel Core i9-11900KF, and AMD Ryzen 5 8540U. Their average scores differ by less than 0.5% from the 7600, so in a game like Downfall—which is not heavily threaded—any of these processors would likely produce nearly identical frame rates. The 7600's single-thread performance (Cinebench R23 single-core score of 1852) is particularly relevant for older game engines that rely on a few fast cores.

On the GPU side, the RX 9060's nearest rivals are the NVIDIA GeForce RTX 3060 Ti (–0.7%), AMD Radeon R9 370X (+1%), AMD Radeon RX 7700 (+1%), and AMD Radeon Pro W5500 (+2.1%). Given that the RX 9060's average benchmark score is 16014, the RTX 3060 Ti (16129) is essentially a match, while the R9 370X and RX 7700 are about 1% ahead. In practice, these GPUs would deliver very similar FPS in Downfall at the same settings, with differences of only a few frames. The RX 9060's 8 GB GDDR6 memory and 288 GB/s bandwidth are sufficient for this 2016 title, which is not memory-hungry by modern standards.

CPU and GPU Roles

The measured FPS across resolutions reveal how the workload shifts between CPU and GPU. At 1080p, the system produces very high frame rates: 210 FPS on Low, 172 on Medium, 141 on High, and 88 on Ultra. The drop from Low to Ultra (210 to 88) is about 58%, indicating that the GPU is already under significant load at the highest preset. When moving to 1440p, the same settings yield 150, 123, 101, and 63 FPS respectively. The reduction from 1080p to 1440p is roughly 29% across all presets, which is consistent with an increasing GPU workload as pixel count rises.

At 4K, the trend continues: Low gives 93 FPS, Medium 76, High 63, and Ultra 39. The Ultra preset at 4K is the only configuration that falls below the 60 FPS threshold. The scaling from 1080p to 4K at Ultra is a 56% drop (88 to 39), while at Low it is also about 56% (210 to 93). This uniform reduction suggests that the GPU is the primary bottleneck at higher resolutions, as the CPU's performance is likely sufficient to feed the GPU even at 1080p. The Ryzen 5 7600's strong single-thread score (Cinebench R23 single 1852) and 6-core/12-thread configuration are more than enough for a horror game from 2016, which typically has modest CPU demands. Therefore, the data indicates that the GPU determines playability at 4K Ultra, while the CPU is never the limiting factor in this combination.

The Verdict

Yes, this PC can run Downfall at playable frame rates in the majority of scenarios. According to the verdict data, the playable threshold is 60 FPS. At 3840x2160, the playable settings are High, Medium, and Low, with High achieving 63 FPS (the best playable option). At 2560x1440, all four settings—Low, Medium, High, and Ultra—are playable, with Ultra delivering 63 FPS. At 1920x1080, all settings are playable, and Ultra reaches 88 FPS. The only non-playable configuration is 4K Ultra, which averages 39 FPS. For users with a 4K display, choosing High or lower will maintain smooth gameplay. At 1440p and 1080p, the system can handle the maximum Ultra preset without dipping below 60 FPS.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average FPS of 63. While Medium and Low also clear the threshold, High offers the best visual quality within the playable range.

At 2560x1440, the best playable setting is Ultra, which averages 63 FPS. This is the highest preset available and meets the 60 FPS requirement exactly.

At 1920x1080, the best playable setting is also Ultra, delivering an average of 88 FPS—well above the threshold and the highest of any resolution.

How This Combo Ranks

In the database of tested CPU-GPU combinations for Downfall, this pairing ranks 2185 out of 3716. That places it in the lower half of all tested configurations, meaning many other combos achieve higher frame rates. However, the individual components are not weak: the CPU is in the 78th percentile of all CPUs, and the GPU is in the 59th percentile of all GPUs. The lower combined rank likely reflects the game's modest requirements—many higher-end GPUs can push far beyond 60 FPS at 4K Ultra, while this GPU cannot. Still, for the vast majority of playable settings, the system performs adequately. The rank also suggests that if you are considering a similar build, the RX 9060 is the more limiting factor; upgrading to a GPU with a higher benchmark score would move the combo significantly up the rankings.

Measured FPS Breakdown

The following table lists the exact average, minimum, and maximum FPS recorded for each resolution and preset. Note that min/max values are only available for Medium settings; all other presets report only average FPS.

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|------------|----------|---------|---------|---------|

| 3840x2160 | Low | 93 | – | – |

| 3840x2160 | Medium | 76 | 65 | 88 |

| 3840x2160 | High | 63 | – | – |

| 3840x2160 | Ultra | 39 | – | – |

| 2560x1440 | Low | 150 | – | – |

| 2560x1440 | Medium | 123 | 104 | 141 |

| 2560x1440 | High | 101 | – | – |

| 2560x1440 | Ultra | 63 | – | – |

| 1920x1080 | Low | 210 | – | – |

| 1920x1080 | Medium | 172 | 146 | 198 |

| 1920x1080 | High | 141 | – | – |

| 1920x1080 | Ultra | 88 | – | – |

The data shows a clear progression: as resolution increases, FPS drops, and as settings increase, FPS also drops. The Medium preset consistently provides the widest FPS range, with the minimum and maximum values recorded. At 4K Ultra, the average of 39 FPS is the only sub-60 result, making it the single unplayable configuration. For users seeking a stable experience, the recommended settings from the verdict—High at 4K, Ultra at 1440p, and Ultra at 1080p—all deliver averages of at least 63 FPS, ensuring smooth gameplay in this horror title.