Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 48 | 77 | 93 | 114 |
| 1440p QHD | 77 | 123 | 150 | 183 |
| 1080p Full HD | 108 | 172 | 210 | 257 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 5 7500X3D paired with the NVIDIA GeForce RTX 3070 delivers a robust performance profile in Downfall, a 2016 horror title. Measured data shows this combination handles the game decisively at 1080p and 1440p, while also maintaining playability at 4K with adjusted settings. The following analysis breaks down the exact frame rates, settings guidance, and system dynamics based solely on the measured benchmark data.
Measured FPS Breakdown
At 3840x2160 (4K), the combination produces a wide spread of results depending on the preset. With Low settings, the average frame rate reaches 114 FPS. Moving to Medium settings, the average drops to 93 FPS, with a recorded minimum of 79 FPS and a maximum of 107 FPS. The High preset yields an average of 77 FPS, which remains above the 60 FPS playability threshold. However, the Ultra preset falls below that threshold, averaging only 48 FPS, with no min or max values recorded for this setting.
At 2560x1440 (1440p), the performance scales upward significantly. The Low preset averages 183 FPS, while Medium delivers 150 FPS on average, with a minimum of 127 FPS and a maximum of 172 FPS. The High preset averages 123 FPS. Even the most demanding Ultra preset maintains an average of 77 FPS, which is identical to the 4K High result but now at a higher resolution and visual fidelity.
At 1920x1080 (1080p), the system shows its strongest performance. The Low preset achieves an average of 257 FPS. The Medium preset averages 210 FPS, with a minimum of 179 FPS and a maximum of 242 FPS. The High preset averages 172 FPS. The Ultra preset, the most demanding option, still produces an average of 108 FPS, comfortably above the 60 FPS target.
The data reveals a consistent pattern: each step up in resolution from 1080p to 1440p to 4K reduces average frame rates roughly by a factor of 1.4 to 1.6 at equivalent settings. For instance, at High settings, the average goes from 172 FPS at 1080p to 123 FPS at 1440p to 77 FPS at 4K. The scaling is predictable, indicating a balanced workload distribution between the CPU and GPU.
Best Settings per Resolution
For 3840x2160, the most demanding preset that stays at or above 60 FPS is High, which achieves an average of 77 FPS. While Medium and Low also exceed 60 FPS, High offers the best visual quality among playable options. The Ultra preset at 48 FPS average is not viable for smooth gameplay.
For 2560x1440, the Ultra preset is the best choice, as it maintains an average of 77 FPS. This is notable because it matches the 4K High average, but at a lower resolution with higher in-game settings. All four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold at this resolution.
For 1920x1080, the Ultra preset is recommended, delivering an average of 108 FPS. This provides the highest visual fidelity while still offering a substantial margin above the 60 FPS minimum. The frame rate headroom is significant, suggesting the system could handle additional load without dropping below playability.
The pattern across resolutions shows that the system can always find a playable preset, but the margin shrinks as resolution increases. At 4K, only the top three presets are viable; at 1440p and below, all presets are viable, with Ultra being the optimal choice for image quality.
CPU and GPU Roles
The benchmark data suggests a shifting balance between CPU and GPU influence depending on resolution. At 1920x1080, the frame rates are exceptionally high, ranging from 172 FPS at High to 257 FPS at Low. These numbers indicate that the GPU is not the limiting factor at this resolution; the CPU, the AMD Ryzen 5 7500X3D with its 6 cores and 12 threads, is capable of feeding the GPU enough data to reach these levels. The large 96 MB shared L3 cache likely helps maintain consistent frame pacing in this CPU-bound scenario.
At 2560x1440, the frame rates drop by roughly 30-40% compared to 1080p across all settings. This reduction is typical of increased GPU load, as the RTX 3070 must render more pixels. The fact that Ultra still hits 77 FPS average indicates the GPU has sufficient headroom, but the scaling suggests the GPU is becoming more influential. The CPU is still keeping up, as evidenced by the high minimum frame rate of 127 FPS at Medium settings.
At 3840x2160, the GPU becomes clearly dominant. The average frame rate at High falls to 77 FPS, and at Ultra it drops to 48 FPS. This steep decline from 1440p to 4K is characteristic of a GPU-bound scenario, where the RTX 3070’s 8 GB GDDR6 memory and 448.0 GB/s bandwidth are pushed to their limits. The CPU’s role diminishes at this resolution, as the bottleneck shifts entirely to the graphics card’s rendering throughput.
The scaling between Low and Ultra at each resolution further clarifies the roles. At 1080p, the difference between Low (257 FPS) and Ultra (108 FPS) is a factor of 2.4, indicating that the GPU’s shading units (5888) and texture units (184) are heavily taxed by higher presets. At 4K, the same Low-to-Ultra ratio is 2.375 (114 to 48), showing similar GPU sensitivity. However, the absolute frame rates at 4K are much lower, confirming that the GPU is the primary constraint at higher resolutions.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the AMD Ryzen 5 7500X3D has an average benchmark score of 44573. The closest competitor is the Intel Core i5-14600, which scores 44889, a delta of -0.7% relative to the 7500X3D. This means the i5-14600 is essentially tied in performance, being slightly faster. Other close rivals include the Intel Core Ultra X9 388H at 44466 (0.2% slower), the Intel Core i9-13950HX at 44342 (0.5% slower), and the AMD Ryzen AI Max 385 at 44309 (0.6% slower). These CPUs would yield nearly identical frame rates in Downfall, with differences of less than 1% being imperceptible in practice.
For the GPU, the NVIDIA GeForce RTX 3070 has an average benchmark score of 17208. The nearest rival is the AMD Radeon RX 7600 XT, scoring 17083, which is 0.7% slower. The NVIDIA GeForce GTX 690 scores 17037 (1% slower), and the AMD Radeon HD 7970M scores 17019 (1.1% slower). On the faster side, the NVIDIA Tesla K40c scores 17468, which is 1.5% faster than the RTX 3070. These alternatives would produce very similar FPS results, with the Tesla K40c being marginally faster but likely not enough to change the playability verdict at any resolution.
The data indicates that a system with any of these CPU or GPU alternatives would perform within a narrow band of the tested combination. For instance, swapping the RTX 3070 for an RX 7600 XT would likely reduce frame rates by less than 1 FPS in most scenarios, which is negligible.
The Verdict
Based on the verdictByResolution data, this PC can run Downfall effectively at all tested resolutions, but with caveats. At 3840x2160, the playable settings are High, Low, and Medium, with the best being High at an average of 77 FPS. The Ultra preset is not playable, averaging just 48 FPS, which is below the 60 FPS threshold.
At 2560x1440, all four presets are playable, with Ultra being the best at 77 FPS average. This is the sweet spot for this combination, offering high visual fidelity with a comfortable frame rate margin.
At 1920x1080, the system excels. All presets are playable, with Ultra averaging 108 FPS. This resolution provides the most headroom, ensuring smooth gameplay even in demanding scenes.
The core verdict is clear: the system is fully capable of running Downfall at 1080p and 1440p with maximum settings, and at 4K with High settings. The only limitation is 4K Ultra, which requires lowering the preset to High to maintain playability. The measured data confirms that the 60 FPS threshold is consistently met or exceeded in all playable configurations.
How This Combo Ranks
The combination of the AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 3070 ranks 1592 out of 3716 tested combos for Downfall. This places it in the 57th percentile of all tested systems, meaning it outperforms roughly 57% of configurations while being outperformed by the remaining 43%. This middle-to-upper tier ranking is consistent with the frame rate results, which show strong 1080p and 1440p performance but only moderate 4K capability.
Given the game’s 2016 release date, the rank is respectable but not top-tier. The RTX 3070’s percentile of 61 among all GPUs and the CPU’s percentile of 89 among all CPUs suggest that the GPU is the limiting factor in this ranking. A more powerful GPU would likely push this combo higher, while the CPU provides ample headroom for future upgrades.
FAQ
Q: Can this PC run Downfall at 4K with High settings?
A: Yes, the measured average FPS at 3840x2160 with High settings is 77 FPS, which is above the 60 FPS playability threshold. Ultra settings, however, average only 48 FPS and are not playable.
Q: What is the best settings preset at 1440p for this combination?
A: The Ultra preset is the best at 2560x1440, achieving an average of 77 FPS. All four presets (Low, Medium, High, Ultra) are playable at this resolution, but Ultra offers the highest visual quality.
Q: How does the RTX 3070 compare to the RX 7600 XT in this game?
A: The RTX 3070 has an average benchmark score of 17208, while the RX 7600 XT scores 17083, which is 0.7% lower. This translates to a negligible difference in frame rates, likely less than 1 FPS in most scenarios.
Q: Is the CPU or GPU more important at 1080p in Downfall?
A: At 1920x1080, the high frame rates (up to 257 FPS at Low) indicate the CPU is well-utilized, with the Ryzen 5 7500X3D’s 96 MB L3 cache helping maintain performance. The GPU is not the bottleneck at this resolution.
Q: What is the lowest average FPS recorded at 4K with playable settings?
A: The lowest playable average at 3840x2160 is 77 FPS, achieved with both High and Medium settings. The Medium preset also has a minimum FPS of 79, ensuring no drops below 60 FPS.
Q: Does this combo rank in the top half of all tested systems?
A: Yes, the combo ranks 1592 out of 3716, placing it above the median. This means it performs better than approximately 57% of all tested combinations for Downfall.