Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 15 | 28 | 36 | 40 |
| 1440p QHD | 29 | 43 | 55 | 64 |
| 1080p Full HD | 40 | 65 | 73 | 94 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 5 7500F paired with the AMD Radeon RX 570 presents a notable contrast in hardware generations, with a modern 6-core Zen 4 processor driving an older Polaris-based graphics card. For the horror title Downfall, the recorded data shows that the GPU is the primary constraint across most configurations, though the CPU provides enough headroom to avoid bottlenecking at lower resolutions. This combination ranks 3533 out of 3716 tested combos in the database for this game, placing it in the lower percentile of overall performance. The measurements below detail exactly where this pairing can and cannot maintain playable frame rates.
Best Settings per Resolution
At 1920x1080, the highest preset that maintains an average of at least 60 FPS is High, with a recorded average of 64.5 FPS. This is the optimal balance for this resolution, as the jump to Ultra drops the average to 39.5 FPS, which falls below the playable threshold. The Medium preset averages 72.9 FPS and Low averages 93.7 FPS, both of which are also playable, but High offers the best visual fidelity while still clearing the 60 FPS bar.
At 2560x1440, the only setting that achieves playable performance is Low, with an average of 64.4 FPS. Medium falls short at 54.6 FPS, High drops to 43.3 FPS, and Ultra is not viable at 28.9 FPS. The data indicates that 1440p users must accept the lowest preset to stay above the 60 FPS threshold with this hardware combination.
At 3840x2160, no preset reaches the 60 FPS playable threshold. The closest is Low at 40.2 FPS, followed by Medium at 36.3 FPS, High at 28.1 FPS, and Ultra at 14.6 FPS. The verdict field for 4K lists no playable settings, confirming that this combination cannot deliver a smooth experience at this resolution regardless of graphical adjustments.
CPU and GPU Roles
The benchmark results indicate that the Radeon RX 570 is the decisive component in this pairing. The scaling across resolutions shows a clear GPU-bound pattern: at 1920x1080 Low the system produces 93.7 FPS, which drops to 64.4 FPS at 2560x1440 Low, a reduction of approximately 31%, and further to 40.2 FPS at 3840x2160 Low. This steep decline as pixel count increases is characteristic of a graphics card reaching its fill-rate and bandwidth limits. The RX 570 offers 224.0 GB/s of memory bandwidth and 5.095 TFLOPS of FP32 compute, figures that are modest by current standards and consistent with the observed performance ceiling.
The Ryzen 5 7500F, by contrast, demonstrates ample processing capability. Its multi-threaded scores, such as 22799 in Cinebench R23 and 26825 in Passmark multithread, place it far above what a horror title like Downfall would require. Even at 1920x1080 with Low settings, where CPU load is typically highest relative to GPU load, the system maintains 93.7 FPS, suggesting the processor is not the limiting factor. The CPU's percentile ranking of 77 against all CPUs further supports that it is not the bottleneck in this configuration.
The preset scaling reinforces the GPU-bound conclusion. At 1920x1080, moving from Low to High reduces the average from 93.7 FPS to 64.5 FPS, a 31% drop. At 2560x1440, the same preset change reduces performance from 64.4 FPS to 43.3 FPS, a 33% drop. At 3840x2160, Low to High goes from 40.2 FPS to 28.1 FPS, a 30% drop. These consistent reductions across resolutions indicate that the graphics card's processing capacity, not the CPU, governs frame rates. The CPU's role becomes more prominent only if the GPU were upgraded, but with the RX 570 in place, the data shows a purely GPU-limited scenario.
FAQ
Q: Can this system run Downfall at 1920x1080 with High settings?
A: Yes. The recorded average FPS at 1920x1080 High is 64.5, which clears the 60 FPS playable threshold.
Q: What is the best playable setting at 2560x1440?
A: Low is the only playable preset at this resolution, with an average of 64.4 FPS. Medium, High, and Ultra all fall below 60 FPS.
Q: Is 4K gaming possible with this CPU and GPU combination?
A: No. At 3840x2160, even the Low preset only reaches 40.2 FPS, and the verdict field lists no playable settings for this resolution.
Q: How much performance is lost when moving from 1080p to 1440p at Low settings?
A: The average FPS drops from 93.7 at 1920x1080 Low to 64.4 at 2560x1440 Low, a reduction of roughly 31%.
Q: Does the Ryzen 5 7500F bottleneck the RX 570 in this game?
A: The data does not indicate a CPU bottleneck. The consistent FPS drops across resolutions and presets point to the GPU as the limiting component, while the CPU's high benchmark scores suggest it has ample headroom.
Q: Which preset should be avoided entirely?
A: Ultra at 3840x2160, which averages only 14.6 FPS, and Ultra at 2560x1440 at 28.9 FPS. Both are far below playable levels.
The Verdict
This PC can run Downfall, but only under specific conditions. At 1920x1080, the system delivers playable performance on High, Medium, and Low presets, with High being the recommended choice since it averages 64.5 FPS and provides the best visual quality among the playable options. At 2560x1440, only the Low preset clears the 60 FPS threshold with an average of 64.4 FPS. At 3840x2160, the system fails to reach 60 FPS on any setting, with the best average being 40.2 FPS on Low.
The playable settings summary confirms this: 1920x1080 supports High, Low, and Medium, while 2560x1440 supports only Low. The 4K resolution has no playable settings. Users targeting 1080p will find a smooth experience with room to spare, while 1440p users must compromise heavily on visual quality. 4K is not a viable option for this hardware in Downfall.
Similar Performance Alternatives
The CPU's nearest rivals in the database's average benchmark scores are closely matched. The Intel Core i7-11850H scores 24935, which is 0.1% higher than the Ryzen 5 7500F's average of 24964. The AMD Ryzen 5 8400F scores 25005, a 0.2% advantage. The Intel Core i7-13620H scores 24911, 0.2% lower, and the Intel Core 5 210H scores 24872, 0.4% lower. In practice, any of these processors would deliver nearly identical frame rates in Downfall when paired with the same GPU, as the game is not CPU-limited in this configuration.
For the GPU, the AMD Radeon RX 6800M has an average score of 28874, which is 0.4% higher than the RX 570's 28766. The AMD Radeon R9 M295X scores 28580, 0.7% lower. The AMD Radeon RX 470 scores 28996, 0.8% higher, and the NVIDIA Quadro RTX 8000 scores 28421, 1.2% lower. The RX 470 is of particular interest since it shares the same Polaris architecture generation, meaning users upgrading from an RX 470 to an RX 570, or vice versa, would see almost no change in Downfall performance. The RX 6800M and R9 M295X are mobile-oriented parts, but their benchmark proximity suggests similar in-game behavior.
How This Combo Ranks
The combination of the Ryzen 5 7500F and RX 570 ranks 3533 out of 3716 total tested combos in the database. This places it in the bottom 5% of all possible pairings for Downfall. The low ranking is driven almost entirely by the GPU's modest capabilities. A CPU with a much lower benchmark score could occupy a similar ranking, and a GPU with a higher score would push this pairing up significantly. The data indicates that this is a low-tier configuration for modern gaming, suitable only for 1080p or light 1440p use.
Measured FPS Breakdown
The complete set of recorded measurements for this pairing is as follows:
At 3840x2160, the High preset averages 28.1 FPS, Low averages 40.2 FPS, Medium averages 36.3 FPS, and Ultra averages 14.6 FPS. No minimum or maximum FPS values were recorded for any preset at this resolution.
At 2560x1440, High averages 43.3 FPS, Low averages 64.4 FPS, Medium averages 54.6 FPS, and Ultra averages 28.9 FPS. As with 4K, no min or max values are present in the measurements.
At 1920x1080, High averages 64.5 FPS, Low averages 93.7 FPS, Medium averages 72.9 FPS, and Ultra averages 39.5 FPS. The 1080p data shows the widest spread between Low and Ultra, from 93.7 to 39.5 FPS, highlighting the significant cost of the highest preset.
Across all resolutions, the pattern is consistent: Low always provides the highest average FPS, followed by Medium, then High, then Ultra with the lowest scores except at 2560x1440 where High, at 43.3, runs slightly below Medium, at 54.6, which is expected. The absence of min and max FPS data means the analysis relies solely on averages, but the averages alone are sufficient to determine playability across all twelve measured configurations.