Downfall

The AMD Ryzen 5 5600X and NVIDIA GeForce RTX 2060 combination delivers a wide range of performance in Downfall, with results that shift dramatically based on resolution and quality preset. The recorded data shows a system capable of high refresh rates at lower resolutions, but one that requires careful settings management at 4K. The following analysis breaks down the measured FPS, component roles, and optimal configurations for this horror title.

Measured FPS Breakdown

At 1920x1080, the pairing shows its strongest performance. The Low preset produces an average of 172.3 FPS, which is the highest recorded figure for this combo across all tests. Medium settings follow closely at 146.1 FPS, while High drops to 114.5 FPS. The most demanding preset, Ultra, still maintains a robust 74.9 FPS average. The spread between Low and Ultra at this resolution is 97.4 FPS, indicating that the visual quality settings have a massive impact on frame output.

Moving to 2560x1440, the averages remain very playable but the gap between presets narrows slightly. Low settings deliver 123.8 FPS, Medium reaches 103.5 FPS, and High produces 85.2 FPS. Ultra, however, falls to 54.7 FPS, which sits below the 60 FPS playable threshold. The difference between Low and Ultra here is 69.1 FPS, a smaller margin than at 1080p, suggesting the resolution increase is beginning to tax the GPU more heavily.

At 3840x2160, the performance curve steepens considerably. Low settings yield 75.8 FPS, Medium drops to 65.9 FPS, and High falls to 54.2 FPS. Ultra is the only preset that becomes effectively unplayable, with an average of 31.3 FPS. The gap between Low and Ultra at 4K is 44.5 FPS, the smallest absolute spread of all resolutions, which indicates that the GPU is becoming the limiting factor even at lower quality settings. No minimum or maximum FPS values were recorded for any configuration, so the analysis relies solely on average frame rates.

CPU and GPU Roles

The data reveals a clear shift in workload balance across resolutions. At 1920x1080, the CPU has more headroom to feed the GPU, allowing the RTX 2060 to stretch its legs. The massive 97.4 FPS difference between Low and Ultra at this resolution suggests the graphics card is the primary driver of performance, but the Ryzen 5 5600X keeps up without bottlenecking. The CPU's strong single-thread performance, evidenced by a 3dmark_single_thread score of 917 and a passmark_single_thread score of 3364, supports this behavior.

At 2560x1440, the GPU begins to take on a heavier load. The frame rate drop from Low to Ultra is 69.1 FPS, and the Ultra preset falls below 60 FPS for the first time. This indicates that the RTX 2060's rasterization throughput, measured at 6.451 TFLOPS FP32, is becoming a limiting factor at higher pixel counts. The CPU still has performance to spare, as evidenced by the relatively small drop in FPS between 1080p and 1440p at Low settings (172.3 to 123.8, a 48.5 FPS reduction). This scaling pattern points to the GPU as the dominant constraint.

At 3840x2160, the GPU is unequivocally the bottleneck. The 44.5 FPS spread between Low and Ultra is the smallest of any resolution, meaning even lowering quality settings cannot fully compensate for the pixel throughput required at 4K. The RTX 2060's 336.0 GB/s memory bandwidth and 192-bit bus width are likely contributing factors. The Ryzen 5 5600X, with its 32 MB L3 cache and 12 threads, shows no signs of holding back the system at this resolution, as the frame rates scale consistently with GPU load rather than CPU capability.

Best Settings per Resolution

For 1920x1080, the Ultra preset is the clear choice. It delivers 74.9 FPS, which clears the 60 FPS playable threshold by 14.9 FPS. This allows users to experience the game at its highest visual fidelity without sacrificing smoothness. The next step down, High, offers 114.5 FPS, but the Ultra setting provides the best balance of quality and performance.

At 2560x1440, the High preset is the most demanding option that remains playable, with an average of 85.2 FPS. This is 25.2 FPS above the playable threshold. Ultra falls short at 54.7 FPS, so High represents the optimal trade-off. The data shows that 1440p users should avoid Ultra unless they are willing to accept frame rates below 60 FPS.

At 3840x2160, the Medium preset is the best choice, producing 65.9 FPS. This is 5.9 FPS above the playable threshold. High drops to 54.2 FPS, which is below the 60 FPS target, and Ultra is not viable at 31.3 FPS. Low offers 75.8 FPS, but Medium provides a better visual experience while still maintaining playability. The verdict data confirms these selections, listing Medium as the best playable setting at 4K, High at 1440p, and Ultra at 1080p.

FAQ

*Q: Can this system run Downfall at 1920x1080 with maximum settings?*

A: Yes. The Ultra preset at 1920x1080 delivers an average of 74.9 FPS, clearing the 60 FPS playable threshold. This is the highest quality setting available and it remains smooth.

Q: What is the best preset for 2560x1440?

A: High settings at 2560x1440 produce 85.2 FPS, which is the most demanding preset that stays above 60 FPS at this resolution. Ultra falls below the threshold at 54.7 FPS.

Q: Is 4K gaming viable with the RTX 2060?

A: Partially. At 3840x2160, Medium settings achieve 65.9 FPS, which is playable. High and Ultra drop to 54.2 FPS and 31.3 FPS respectively, so 4K requires reduced quality settings.

Q: How much performance is lost when moving from 1080p to 1440p at High settings?

A: High settings at 1920x1080 yield 114.5 FPS, while the same preset at 2560x1440 yields 85.2 FPS. This represents a reduction of 29.3 FPS, or about a 25.6% decrease.

Q: Does the CPU or GPU limit performance more in this game?

A: The GPU is the primary limit at higher resolutions. The frame rate spread between Low and Ultra narrows from 97.4 FPS at 1080p to 44.5 FPS at 4K, indicating the RTX 2060 becomes the bottleneck as pixel count increases.

Q: What is the lowest playable configuration recorded?

A: At 3840x2160, Low settings produce 75.8 FPS, which is the minimum resolution and preset combination that still clears 60 FPS. At 1440p, Low yields 123.8 FPS, and at 1080p, Low yields 172.3 FPS.

The Verdict

The recorded data indicates that this PC can run Downfall effectively across all tested resolutions, provided the right presets are chosen. At 1920x1080, every preset including Ultra clears the 60 FPS threshold, with Ultra hitting 74.9 FPS. At 2560x1440, High is the best playable option at 85.2 FPS, while Ultra falls short at 54.2 FPS when set to Ultra. At 3840x2160, Medium achieves 65.7 FPS, which clears 60 FPS, but High drops to 54.2 FPS. The verdict data confirms playable settings at each resolution: Low and Medium at 4K, High, Low, and Medium at 1440p, and all four presets at 1080p. The best playable settings are Medium at 4K, High at 1440p, and Ultra at 1080p.

How This Combo Ranks

This specific combination of the AMD Ryzen 5 5600X and NVIDIA GeForce RTX 2060 ranks 2867 out of 3716 tested combos in Downfall. This places it in the lower half of the database, which aligns with the GPU's percentile of 58 and the CPU's percentile of 75. The ranking reflects the RTX 2060's position as a mid-range card, even though the CPU is a strong performer. The system is capable of smooth gameplay at 1080p and 1440p, but the 4K results are limited, which explains the overall ranking among a field that includes more powerful GPU pairings.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide context for how this combo compares to other hardware. The Ryzen 5 5600X has an average benchmark score of 21771, with the AMD Ryzen 7 4800H scoring 21749, a negligible 0.1% difference. The AMD Ryzen 5 PRO 6650U scores 21874 (0.5% higher), the Intel Core i7-11700 scores 21891 (0.5% higher), and the AMD EPYC 9554P scores 21899 (0.6% higher). These CPUs would deliver nearly identical frame rates in Downfall, as the game does not appear to be heavily CPU-bound at the tested settings.

The GPU side shows similar parity. The RTX 2060 has an average benchmark score of 15290. The NVIDIA GeForce GTX 580 scores 15283, just 0.1% lower. The AMD Radeon 680M scores 15270, a 0.1% difference, and the NVIDIA GeForce RTX 3050 OEM scores 15199, 0.6% lower. The AMD Radeon RX 7600 rounds out the group with 15171, a 0.8% difference. Users with any of these alternative GPUs can expect comparable performance in Downfall, meaning the gameplay experience at each preset will be nearly indistinguishable from the recorded RTX 2060 results. The tight clustering of these scores suggests that any of these components would offer a similar balance of frame rates across the resolution and settings matrix.