Downfall

The AMD Ryzen 5 5600GT and Intel Arc B580 combination delivers a surprisingly capable experience in Downfall, a 2016 horror title that is far more demanding than its age suggests. Benchmark measurements show this pairing handles 1080p and 1440p with ease, while 4K requires some settings compromise. The data indicates a well-balanced system where the GPU carries most of the load, but the CPU never becomes a bottleneck at the tested resolutions.

Similar Performance Alternatives

The Ryzen 5 5600GT sits at the 74th percentile among all CPUs, with an average benchmark score of 20733. Its nearest rivals are separated by less than one percent in either direction. The Intel Core i5-12490F scores 20802, a delta of -0.3%, meaning the 5600GT is effectively tied with it. The Intel Xeon 6325P (20821, -0.4%) and Intel Core Ultra 5 125U (20826, -0.4%) also land within a hair of the AMD chip. The AMD EPYC 7J13 (20845, -0.5%) rounds out this cluster. In practical terms, a system built around any of these four processors would deliver nearly identical frame rates in Downfall, assuming the same GPU and memory configuration.

On the graphics side, the Intel Arc B580 occupies the 68th percentile among all GPUs with an average score of 23021. Its closest competitor is the AMD Radeon RX 580 2048SP at 23061, a -0.2% difference. The NVIDIA GeForce RTX 2080 trails by 0.6% (22895), while the RTX 3080 leads by 0.7% (23172). The NVIDIA P106-100 is 1% ahead at 23249. These deltas are all within measurement noise, so swapping the B580 for any of these cards would produce nearly indistinguishable performance in this game. The RTX 3080 being in this group is notable — it suggests the B580 punches well above its class for Downfall specifically.

Best Settings per Resolution

At 1920x1080, the most demanding preset that maintains 60 FPS is Ultra, which runs at an average of 77 FPS. The lower presets all blow past the threshold: High hits 124 FPS, Medium reaches 151 FPS, and Low tops out at 185 FPS. The Ultra setting is the clear choice here, as it clears the 60 FPS bar by a comfortable 17 FPS margin while delivering the full visual experience.

Moving to 2560x1440, the best playable setting is High, which averages 88 FPS. Medium runs at 108 FPS, and Low reaches 132 FPS. Ultra drops to 55 FPS, which falls below the 60 FPS threshold and therefore is not recommended. High at 1440p is the sweet spot for this combo — it provides a significant visual upgrade over 1080p while keeping frame rates well above playable.

At 3840x2160, the situation tightens considerably. Medium is the best playable preset, averaging 67 FPS with a minimum of 57 FPS and a maximum of 77 FPS. Low runs at 82 FPS, while High drops to 55 FPS and Ultra falls to 34 FPS. The Medium preset at 4K is technically the best choice, but the 57 FPS minimum shows it occasionally dips below the 60 FPS target. For strict 60 FPS consistency at 4K, Low at 82 FPS is the safer pick, though Medium offers better visuals with only minor dips.

CPU and GPU Roles

The division of labor between the Ryzen 5 5600GT and Arc B580 becomes clear when examining frame rate scaling across resolutions and presets. At 1080p Ultra, the system produces 77 FPS. Dropping to Low at the same resolution yields 185 FPS — a 140% increase. This massive jump indicates the GPU is the primary constraint at 1080p; when the GPU workload is reduced, the CPU can feed frames much faster.

At 1440p, the pattern continues but with a narrower gap. Ultra runs at 55 FPS, while Low reaches 132 FPS — a 140% improvement again. The consistent percentage scaling between presets at both 1080p and 1440p suggests the CPU is not bottlenecking at either resolution. If the CPU were the limiting factor, the Low preset would show diminishing returns as it approached the CPU's maximum frame delivery capability.

The 4K results reveal where the GPU becomes the absolute bottleneck. At 4K Ultra, the system manages just 34 FPS, while Low reaches 82 FPS. The scaling from Ultra to Low is 141%, nearly identical to the lower resolutions. This linear scaling across all three resolutions points to a GPU-bound scenario throughout. The Ryzen 5 5600GT, with its 6 cores and 12 threads, has enough headroom to keep up with the Arc B580's output at every resolution tested.

The CPU's single-thread performance of 913 in 3dmark and 2438 in Cinebench R23 single-core is adequate for a 2016 horror title. Multi-threaded scores of 17272 in Cinebench R23 and 20325 in Passmark multithread further confirm that CPU capacity is not a limiting factor. The data shows the B580's 13.67 TFLOPS of FP32 compute is the ceiling for this pairing.

The Verdict

This PC can absolutely run Downfall, and it does so impressively across most resolution and settings combinations. At 1920x1080, every preset including Ultra clears 60 FPS, with Ultra averaging 77 FPS. This is the ideal resolution for this combo if you want maximum visual fidelity without compromise.

At 2560x1440, High settings deliver 88 FPS on average, which is excellent for a horror game where smooth motion matters for atmosphere. The Ultra preset at 55 FPS is the only miss at this resolution, falling just 5 FPS short of the playable threshold. Medium at 108 FPS and Low at 132 FPS are both far above what the game requires.

The 4K results are mixed. Medium at 67 FPS is technically playable, but the 57 FPS minimum means you will feel occasional stutters. Low at 82 FPS is the safer choice for consistent 60 FPS at 4K. High at 55 FPS and Ultra at 34 FPS are both below the threshold and should be avoided. If you have a 4K display, the recommendation is to run Low settings for smoothness or Medium if you can tolerate minor dips.

In summary: this system is a strong 1080p and 1440p performer, with 4K being playable only at lower presets. The 60 FPS threshold is cleared at 1080p Ultra (77 FPS), 1440p High (88 FPS), and 4K Medium (67 FPS) or Low (82 FPS).

FAQ

Q: Can this PC run Downfall at 4K with max settings?

A: No. At 3840x2160 Ultra, the average frame rate is 34 FPS, which falls well below the 60 FPS playable threshold. The highest playable 4K preset is Medium at 67 FPS, though its minimum of 57 FPS occasionally dips below 60.

Q: What is the best 1440p setting for this system?

A: High settings at 2560x1440 produce an average of 88 FPS, making it the most demanding preset that stays above 60 FPS. Ultra at this resolution drops to 55 FPS and is not recommended.

Q: Is the CPU or GPU more important for this game?

A: The data shows the GPU is the limiting factor at all resolutions. Frame rates scale nearly identically (approximately 140% improvement from Ultra to Low) across 1080p, 1440p, and 4K, indicating the Ryzen 5 5600GT has sufficient headroom and the Arc B580 determines performance.

Q: How does the Arc B580 compare to the RTX 2080 in this context?

A: The Arc B580's average benchmark score of 23021 is within 0.6% of the RTX 2080's 22895. In practical terms for Downfall, these cards would produce nearly identical frame rates, making either a suitable choice.

Q: What 1080p settings should I use?

A: Ultra is the best choice, averaging 77 FPS. If you prefer maximum frame rates, Low hits 185 FPS, but Ultra clears the 60 FPS threshold by a wide margin and provides the full visual experience.

Q: Does the Ryzen 5 5600GT bottleneck the Arc B580?

A: No. The consistent frame rate scaling across resolutions and presets indicates the CPU is not limiting performance. The 5600GT's scores place it at the 74th percentile of all CPUs, and its nearest rival, the Core i5-12490F, is within 0.3% — both are capable of feeding the B580 adequately.

How This Combo Ranks

Among the 3716 tested combinations in the database, this pairing of the AMD Ryzen 5 5600GT and Intel Arc B580 ranks 2802nd for Downfall. That places it in the bottom 25% of all combinations tested, which may seem surprising given the strong frame rates measured. The rank reflects the overall performance ceiling of the hardware, not just its suitability for this specific game.

The Ryzen 5 5600GT's 74th percentile CPU standing and the Arc B580's 68th percentile GPU standing combine to produce a mid-range system. The rank of 2802 out of 3716 indicates that most tested combinations feature more powerful components, which makes sense given the database includes high-end CPUs and GPUs. However, the measured frame rates show this combo punches above its percentile rankings for Downfall specifically.

For a 2016 horror title, this system delivers smooth gameplay at 1080p and 1440p, which is all most players require. The low rank is a reflection of the hardware's position in the overall hierarchy, not a statement about its ability to run this game. The data shows that 2802nd place still corresponds to playable performance at three of the four tested presets at 4K, all presets at 1440p, and every preset at 1080p.