Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 62 | 99 | 121 | 148 |
| 1440p QHD | 100 | 160 | 195 | 238 |
| 1080p Full HD | 140 | 224 | 273 | 334 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 5 5600G paired with the NVIDIA GeForce RTX 5070 is a combination that pits a mid-range Zen 3 processor against a high-end Blackwell GPU. For Downfall, a horror title from 2016, the measured frame rate data covers three resolutions and four quality presets. The results are unambiguous: this system clears the 60 FPS playable threshold at every setting tested, including 4K Ultra. The following sections break down the measured performance, ranking, alternatives, and the specific roles each component plays.
Measured FPS Breakdown
The measured FPS data provides a complete picture across 1920x1080, 2560x1440, and 3840x2160, each with Low, Medium, High, and Ultra presets. Minimum and maximum frame rates were recorded only for the Medium preset; other presets list only the average.
At 1920x1080, the system is extremely fast. Low averages 334 FPS, Medium 273 FPS with a minimum of 232 and maximum of 314, High 224 FPS, and Ultra 140 FPS. Even the most demanding preset leaves enormous headroom above 60 FPS. The gap between Low and Ultra is 194 FPS, indicating that the CPU and GPU together are not stressed until the highest settings.
At 2560x1440, performance remains strong. Low averages 238 FPS, Medium 195 FPS (minimum 166, maximum 224), High 160 FPS, and Ultra 100 FPS. The drop from 1080p to 1440p is significant—Ultra falls from 140 to 100 FPS—but still far above the threshold. The Medium preset shows a minimum of 166 FPS, which is more than double the playable requirement.
At 3840x2160, the GPU starts to show its limits. Low averages 148 FPS, Medium 121 FPS (minimum 103, maximum 139), High 99 FPS, and Ultra 62 FPS. The Ultra preset barely clears 60 FPS, with an average of exactly 62. This is the only scenario where the system approaches the boundary, but it still remains playable. The Medium preset's minimum of 103 FPS confirms that even at 4K, the system holds well above 60 FPS for most settings.
The data shows a consistent pattern: resolution scaling has a larger impact than preset scaling at the high end, but the system never falls below the playable threshold.
How This Combo Ranks
In the global ranking for Downfall, this CPU+GPU combination sits at rank 768 out of 3716 tested combos. That places it in the upper portion of all systems tested, meaning it outperforms the majority of configurations. The rank reflects the combined capability of the Ryzen 5 5600G and RTX 5070 in this specific title.
A rank of 768 out of 3716 is a strong result, especially considering that the CPU is a budget-oriented part with integrated graphics. The RTX 5070's high-end performance carries the system, but the 5600G's six cores and twelve threads are sufficient to avoid bottlenecking at most settings. The percentile rankings for the individual components support this: the CPU sits at the 74th percentile among all CPUs, while the GPU is at the 82nd percentile. The GPU is relatively stronger, and the frame rate data reflects that at higher resolutions where the GPU dominates.
Similar Performance Alternatives
The nearest rivals for the CPU and GPU, based on synthetic benchmark scores, offer a sense of what other hardware would behave similarly in Downfall.
For the AMD Ryzen 5 5600G, the closest alternatives are the Intel Core i3-1220P (average score 21066, delta 0.1%), Intel Core Ultra 7 256V (21112, delta -0.1%), AMD Ryzen 5 7530U (21133, delta -0.2%), and Intel Core Ultra 7 155U (21174, delta -0.4%). All four processors have average benchmark scores within 0.4% of the 5600G's 21088. A system using any of these CPUs would deliver nearly identical CPU-bound performance in Downfall, meaning the same frame rates at lower resolutions where the CPU is the limiting factor.
For the NVIDIA GeForce RTX 5070, the nearest rivals are the AMD Radeon Pro 580 (average score 40318, delta 0.1%), AMD Radeon Pro WX 7100 (40063, delta 0.8%), AMD Radeon Pro 5300 (40870, delta -1.2%), and NVIDIA RTX A500 Mobile (39568, delta 2%). These GPUs have synthetic scores within 2% of the RTX 5070's 40377. In practice, swapping the RTX 5070 for one of these would produce similar frame rates in Downfall, particularly at 4K where the GPU is the primary bottleneck. The delta percentages are small enough that the measured FPS values in this analysis would be a close approximation for those combinations.
The Verdict
The question "Can this PC run Downfall?" receives a definitive yes. The verdict data lists all four settings—Low, Medium, High, and Ultra—as playable at every resolution. The playable threshold is 60 FPS, and the system exceeds it in all cases.
At 3840x2160, Ultra averages 62 FPS, which is just above the threshold. High averages 99 FPS, Medium 121 FPS, and Low 148 FPS. At 2560x1440, Ultra averages 100 FPS, and at 1920x1080, Ultra averages 140 FPS. The system not only runs the game but does so at maximum settings across the board.
The only point of caution is 4K Ultra, where the 62 FPS average leaves little margin for frame time spikes. The Medium preset at 4K, with its minimum of 103 FPS, offers a safer experience if absolute consistency is required. But for the vast majority of players, the default recommendation is clear: this combo can handle Downfall at Ultra at any resolution.
CPU and GPU Roles
Understanding which component matters more for Downfall requires looking at how frame rates scale with resolution and preset. The data reveals a clear division of labor.
At 1920x1080, the CPU is the primary driver. The difference between Low and Ultra is 194 FPS (334 to 140), which is the largest gap of any resolution. This indicates that the GPU is not fully saturated at lower resolutions; the CPU's single-thread performance—reflected in its 3dmark_single_thread score of 872 and Cinebench R23 single-core score of 1409—allows the GPU to run at very high frame rates. The CPU's six cores and twelve threads are more than enough for a 2016 title, so the bottleneck shifts to the GPU only as settings and resolution increase.
At 2560x1440, the balance shifts. The gap between Low and Ultra narrows to 138 FPS (238 to 100). The GPU's workload grows with resolution, and the RTX 5070's 12 GB of GDDR7 memory and 672.0 GB/s bandwidth become more relevant. The CPU still keeps pace, but the GPU's pixel rate and texture rate start to matter more.
At 3840x2160, the GPU is firmly the limiting factor. The difference between Low and Ultra is only 86 FPS (148 to 62). The Ultra preset pushes the GPU to its limits, with the average dropping to 62 FPS. The CPU's role diminishes because the GPU is already saturated; even a faster CPU would not meaningfully raise these numbers. The GPU's FP32 throughput of 30.87 TFLOPS and 80 ROPs are the deciding factors here.
The scaling from 1080p to 4K at the same preset shows the same story. For example, Ultra goes from 140 FPS at 1080p to 100 FPS at 1440p to 62 FPS at 4K. The halving of frame rates as resolution doubles is characteristic of GPU-bound workloads. Conversely, the CPU's average benchmark score of 21088 is roughly half the GPU's 40377, but that difference only becomes apparent when the GPU is not the constraint.
In summary, for Downfall, the CPU is the limiting factor at 1080p and low settings, while the GPU takes over as the primary constraint at 4K and high settings. The sweet spot is 1440p, where both components are well utilized, yielding 100 FPS at Ultra.
Best Settings per Resolution
The best settings are defined as the most demanding preset that stays at or above 60 FPS. Based on the measured data, Ultra is the best setting at every resolution.
- 3840x2160: Ultra averages 62 FPS, just above the threshold. This is the most demanding setting that remains playable, though the margin is slim. For a more comfortable experience, Medium at 121 FPS or High at 99 FPS are safer choices.
- 2560x1440: Ultra averages 100 FPS, providing a large margin above 60 FPS. There is no reason to lower settings at this resolution.
- 1920x1080: Ultra averages 140 FPS, offering exceptional headroom. The system is never close to the threshold.
The recommendation is straightforward: enable Ultra at all resolutions. At 4K, players should be aware that the 62 FPS average could dip below 60 in demanding scenes, but the data shows no such dips in the recorded Medium preset (minimum 103 FPS). The overall verdict is that this PC is fully capable of running Downfall at maximum quality.