Downfall

Downfall, the 2016 horror title, presents a clear scaling picture for the AMD Ryzen 5 5600G + Intel Arc B580 combination. The measured data indicates that this system is highly capable at mainstream resolutions, with performance degrading predictably as resolution increases. At 1080p, the system delivers exceptional headroom, while 1440p remains comfortably playable at high settings. The 4K experience, however, requires a trade-off, demanding a reduction in graphical fidelity to maintain smooth gameplay.

Best Settings per Resolution

The benchmark results identify the most demanding preset that maintains an average frame rate at or above 60 FPS at each resolution.

At 3840x2160, the best playable setting is Medium, which produces an average of 65.6 FPS. Pushing to High drops performance to 54.8 FPS, falling below the 60 FPS threshold. Low settings yield 83.5 FPS, but Medium represents the optimal balance of visual quality and performance at this resolution.

At 2560x1440, the system can handle High settings, delivering an average of 90.3 FPS. This is a significant improvement over the 4K result, showing that the resolution reduction provides ample headroom. Medium settings reach 105.5 FPS, and Low reaches 129.8 FPS, but High is the most demanding preset that stays above the playable threshold.

At 1920x1080, the system achieves the highest visual fidelity with Ultra settings, averaging 79.2 FPS. This is the only resolution where the maximum preset is playable. High settings deliver 124.1 FPS, Medium reaches 148.3 FPS, and Low peaks at 185 FPS. The data shows that 1080p is the sweet spot for this hardware, allowing full graphical options without compromising frame rate.

CPU and GPU Roles

The performance scaling across resolutions reveals how the workload shifts between the AMD Ryzen 5 5600G and the Intel Arc B580.

The transition from 1920x1080 to 2560x1440 shows a moderate performance drop. At Ultra settings, frame rates fall from 79.2 FPS to 55.4 FPS, a 30% reduction. This indicates that the GPU is becoming the primary bottleneck as pixel count increases. The CPU, with its 6 cores and 12 threads based on Zen 3 architecture, maintains sufficient throughput to feed the graphics card at these resolutions.

Moving from 2560x1440 to 3840x2160 reveals a more pronounced GPU limitation. At High settings, performance drops from 90.3 FPS to 54.8 FPS, a 39% decrease. The gap between Medium and High at 4K (65.6 FPS vs 54.8 FPS) is 16%, showing that the Arc B580's rendering capabilities are the limiting factor at this resolution. The CPU's role diminishes as resolution increases, with the GPU's 12 GB of GDDR6 memory and 192-bit bus becoming the decisive factor.

The data suggests that at 1080p, the Ryzen 5 5600G's single-thread performance, reflected in its Geekbench single-core score of 1801, is sufficient to avoid bottlenecking the Arc B580. At 1440p and 4K, the GPU's raw throughput, indicated by its Passmark G3D score of 15748, dictates the achievable frame rates. The system shows a balanced partnership at 1080p and 1440p, but at 4K, the GPU workload dominates.

FAQ

Q: Can this system run Downfall at 4K with maximum settings?

A: No. At 3840x2160 with Ultra settings, the system produces an average of 32.8 FPS, which is well below the 60 FPS playable threshold. The best playable setting at this resolution is Medium, averaging 65.6 FPS.

Q: What is the highest quality preset achievable at 1080p?

A: The system can run the game at Ultra settings on 1920x1080, achieving an average of 79.2 FPS. This is the maximum preset available and remains above the 60 FPS playable threshold.

Q: How does the system perform at 1440p compared to 1080p?

A: At 2560x1440, the highest playable setting is High, averaging 90.3 FPS. This is a 27% reduction compared to the 1080p Ultra result of 79.2 FPS when considering the same High preset, which delivers 124.1 FPS at 1080p. The 1440p experience is smooth, but Ultra settings drop to 55.4 FPS, which is not playable.

Q: Is the Intel Arc B580 the main performance limiter at 4K?

A: Yes. The frame rate drop from 1440p High (90.3 FPS) to 4K High (54.8 FPS) is 39%, indicating the GPU is the primary bottleneck. The CPU's performance, with a Cinebench R23 multi-core score of 10551, remains adequate for the workload.

Q: What is the lowest playable setting at 4K?

A: Low settings at 3840x2160 produce an average of 83.5 FPS, which is comfortably above the 60 FPS threshold. However, Medium settings at 65.6 FPS are the most demanding preset that remains playable.

Q: How does the system's overall performance rank for this game?

A: The combination ranks 2835 out of 3716 total tested combos for Downfall, placing it in the 76th percentile. The GPU itself is in the 68th percentile against all GPUs, while the CPU is in the 74th percentile against all CPUs.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 5 5600G provide insight into comparable CPU performance. The Intel Core i3-1220P scores an average of 21066, a mere 0.1% difference from the Ryzen's 21088 average benchmark score. The Intel Core Ultra 7 256V is equally close at 21112, representing a -0.1% delta. For users considering alternative CPUs, the AMD Ryzen 5 7530U (21133, -0.2%) and Intel Core Ultra 7 155U (21174, -0.4%) would deliver nearly identical frame rates in Downfall.

On the GPU side, the Intel Arc B580's average benchmark score of 23021 places it alongside several notable rivals. The AMD Radeon RX 580 2048SP scores 23061, a -0.2% delta, indicating near-identical performance. The NVIDIA GeForce RTX 2080 trails slightly at 22895 (0.6%), while the RTX 3080 leads at 23172 (-0.7%). The NVIDIA P106-100 scores 23249 (-1%). These figures suggest that swapping the Arc B580 for any of these GPUs would result in very similar gameplay experiences, with frame rate differences of less than one percent.

The practical implication is that the system's performance in Downfall is well-characterized by these comparable components. A build with an Intel Core Ultra 7 256V and an RTX 3080 would behave almost identically, with the RTX 3080's slightly higher average score potentially providing a marginal edge in the most demanding 4K scenarios. Conversely, pairing the Ryzen 5 5600G with an RX 580 2048SP would yield nearly the same results, confirming that the Arc B580 is well-matched to this CPU for this particular title.

Measured FPS Breakdown

The complete set of measured average frame rates for the AMD Ryzen 5 5600G + Intel Arc B580 combination in Downfall is presented below.

At 1920x1080, the system delivers its highest performance across all presets. Low settings produce an average of 185 FPS, Medium reaches 148.3 FPS, High achieves 124.1 FPS, and Ultra maintains 79.2 FPS. All presets at this resolution are well above the 60 FPS playable threshold, with even the most demanding setting providing a 32% margin over the minimum requirement.

At 2560x1440, performance remains strong but shows the expected reduction. Low settings average 129.8 FPS, Medium hits 105.5 FPS, High delivers 90.3 FPS, and Ultra drops to 55.4 FPS. The gap between High and Ultra is 39%, indicating a significant jump in rendering complexity. The playable presets here are Low, Medium, and High.

At 3840x2160, the GPU workload becomes intense. Low settings produce 83.5 FPS, Medium averages 65.6 FPS, High falls to 54.8 FPS, and Ultra drops to 32.8 FPS. Only Low and Medium clear the 60 FPS threshold. The difference between Medium and High is 16%, while the drop from High to Ultra is 40%, showing the steep cost of the highest preset at this resolution.

The data shows a consistent pattern: each resolution step down from 4K to 1440p to 1080p yields substantial frame rate improvements across all settings. The system is most comfortable at 1080p, where even Ultra settings provide a 32% cushion above the playable threshold. At 1440p, High settings provide a 50% cushion, while at 4K, Medium provides only a 9% margin.

The Verdict

The AMD Ryzen 5 5600G + Intel Arc B580 system can run Downfall, but the experience depends heavily on the chosen resolution and settings.

At 1920x1080, the system is fully capable, with all presets including Ultra clearing the 60 FPS threshold. The best setting is Ultra, averaging 79.2 FPS, which provides a comfortable margin for maintaining smooth gameplay.

At 2560x1440, the system remains strong, with High settings delivering 90.3 FPS as the best playable option. Low and Medium are also playable, but Ultra falls short at 55.4 FPS, below the 60 FPS threshold.

At 3840x2160, the system requires compromise. Medium settings provide 65.6 FPS, just above the playable threshold, while Low offers 83.5 FPS for those prioritizing frame rate over visual fidelity. High and Ultra settings are not playable at this resolution.

The verdict is clear: this system is a strong performer for Downfall at 1080p and 1440p, offering full or near-full graphical options with smooth frame rates. At 4K, it delivers a playable experience only at Medium settings, with a 9% margin above the minimum threshold. The system's rank of 2835 out of 3716 combos reflects its mid-to-high tier standing, making it a solid choice for this horror title at mainstream resolutions.