Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 35 | 60 | 71 | 88 |
| 1440p QHD | 60 | 92 | 111 | 141 |
| 1080p Full HD | 84 | 129 | 159 | 195 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 5 5600 paired with the AMD Radeon RX 7600 delivers a highly capable 1080p and 1440p experience in Downfall, while 4K gaming requires careful settings management. The measured data reveals a clear pattern: this combo excels at high refresh rates on standard resolutions, but the demands of 4K Ultra push the hardware to its limits. The benchmark results indicate a system that is well-balanced for mainstream gaming, with the GPU becoming the primary bottleneck as resolution increases.
Measured FPS Breakdown
The measured FPS data for Downfall shows a wide performance envelope across the three tested resolutions and four quality presets. At 1920x1080, the combo delivers exceptional frame rates. The Low preset averages 194.6 FPS, which is nearly triple the 60 FPS playability threshold. Medium settings see a drop to 158.6 FPS, while High averages 129.2 FPS. The Ultra preset at 1080p still maintains a strong 84.1 FPS average, comfortably above the playable threshold.
Moving to 2560x1440, the performance scales predictably. Low settings produce an average of 140.6 FPS, Medium hits 110.6 FPS, and High delivers 92.4 FPS. The Ultra preset at 1440p averages 60.2 FPS, which just clears the 60 FPS threshold. This suggests that 1440p Ultra is the ceiling for this combination, with the average frame rate landing right at the edge of playability.
At 3840x2160, the performance curve steepens significantly. The Low preset averages 88.4 FPS, Medium drops to 70.7 FPS, and High falls to 59.6 FPS. The Ultra preset at 4K averages only 34.6 FPS, which is well below the playability threshold. This represents a dramatic falloff from the 1080p Ultra result, showing that 4K resolution demands far more from the GPU than the CPU can compensate for.
The delta between presets at each resolution reveals the scaling efficiency. At 1080p, the gap from Low to Ultra is 110.5 FPS, indicating the GPU has substantial headroom. At 1440p, this gap narrows to 80.4 FPS. At 4K, the gap compresses to 53.8 FPS, suggesting the GPU is running out of resources as resolution climbs.
CPU and GPU Roles
The data shows a clear division of labor between the Ryzen 5 5600 and the RX 7600 in Downfall. At 1920x1080, the CPU's six cores and twelve threads provide sufficient headroom to feed the GPU, as evidenced by the 194.6 FPS Low preset result. The Ryzen 5 5600's single-thread performance, measured at 882 in the 3dmark_single_thread test and 2584 in cinebench_r23_singlecore, proves adequate for the game's logic at this resolution.
At 2560x1440, the GPU begins to assert its dominance. The RX 7600's 2048 shading units and 64 ROPs handle the increased pixel workload, but the CPU still keeps pace. The 92.4 FPS High preset result at 1440p versus 129.2 FPS at 1080p represents a 28.5% drop, which aligns with the resolution scaling rather than a CPU bottleneck.
The 3840x2160 results are where the GPU becomes the limiting factor. The RX 7600's 8 GB GDDR6 memory and 128-bit bus width, providing 288.0 GB/s bandwidth, struggle with the 4K pixel count. The Ultra preset's 34.6 FPS average versus the 1080p Ultra's 84.1 FPS shows a 58.9% performance loss, which is far more severe than the 4x pixel count increase would suggest. This indicates the GPU's memory bandwidth and compute resources are saturated at 4K.
The scaling between presets at each resolution further illuminates the bottleneck. At 1080p, the jump from High to Ultra costs 45.1 FPS, while at 1440p the same jump costs 32.2 FPS. At 4K, the High to Ultra transition costs 25.0 FPS. This diminishing absolute cost at higher resolutions indicates the GPU is already near its limits, making each additional setting increment more expensive relative to the baseline.
FAQ
Q: Can this combo run Downfall at 4K Ultra settings?
A: No. The measured average FPS at 3840x2160 Ultra is 34.6 FPS, which is well below the 60 FPS playability threshold. The verdictByResolution data lists only Low and Medium as playable at 4K.
Q: What is the best playable preset at 2560x1440?
A: Ultra settings at 1440p achieve an average of 60.2 FPS, which just clears the playable threshold. This is the most demanding preset that remains playable at this resolution.
Q: How does the 1080p Ultra performance compare to the 4K Ultra performance?
A: The 1080p Ultra preset averages 84.1 FPS, while 4K Ultra averages 34.6 FPS. This represents a 58.9% performance drop when moving from 1080p to 4K at the same settings.
Q: Is the CPU or GPU more important for this game at 1080p?
A: At 1080p, the CPU provides sufficient headroom, as shown by the 194.6 FPS Low preset result. The GPU becomes the limiting factor as resolution increases, with the 4K results showing GPU saturation.
Q: What is the minimum playable preset at 3840x2160?
A: The Low preset at 4K averages 88.4 FPS, which is well above the playable threshold. Medium also remains playable at 70.7 FPS, but High falls to 59.6 FPS, just below the threshold.
Q: How does this combo rank among all tested configurations for Downfall?
A: The combination ranks 2480 out of 3716 tested combos, placing it in the lower-middle tier of all configurations tested for this game.
The Verdict
The AMD Ryzen 5 5600 and AMD Radeon RX 7600 can run Downfall, but the experience varies significantly by resolution and settings. At 1920x1080, this combo delivers excellent performance across all presets. The Ultra preset averages 84.1 FPS, which is 40.2% above the 60 FPS playability threshold. Even the most demanding settings at 1080p remain highly playable.
At 2560x1440, the combo maintains playability across all four presets. The Ultra preset averages 60.2 FPS, just clearing the threshold, while High delivers 92.4 FPS for a more comfortable margin. The data indicates that 1440p Ultra is the maximum sustainable configuration, with any future settings increases likely to drop below 60 FPS.
At 3840x2160, the verdict is more nuanced. The Low and Medium presets are playable, averaging 88.4 FPS and 70.7 FPS respectively. The High preset falls to 59.6 FPS, missing the playable threshold by a narrow margin. Ultra is not playable at 4K, with its 34.6 FPS average. The verdictByResolution data confirms that only Low and Medium settings are viable at 4K.
How This Combo Ranks
The combo ranks 2480 out of 3716 tested combinations for Downfall, placing it in the 33rd percentile of all tested systems. This ranking reflects the mid-range positioning of both components. The CPU's percentileVsAllCpus of 74 indicates the Ryzen 5 5600 outperforms 74% of all tested CPUs, while the GPU's percentileVsAllGpus of 57 shows the RX 7600 is slightly above average.
This rank suggests that while the combo is capable of running Downfall at playable frame rates in most scenarios, it sits below the top-tier configurations that can handle 4K Ultra without compromise. The 4K Ultra result of 34.6 FPS is the primary factor dragging the rank down, as higher-performing GPUs would maintain playability at that resolution.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 84.1 FPS. This provides a comfortable margin above the playability threshold while maximizing visual quality.
At 2560x1440, the best playable preset is Ultra, with an average of 60.2 FPS. This just clears the 60 FPS threshold, leaving limited headroom for demanding scenes. The High preset at 92.4 FPS offers a more stable experience for those who prefer a safety margin.
At 3840x2160, the best playable preset is Medium, averaging 70.7 FPS. This provides a solid frame rate above the threshold while allowing higher visual quality than the Low preset. The High preset at 59.6 FPS is just below playable, making Medium the optimal choice for 4K gaming on this hardware.
Similar Performance Alternatives
The CPU's nearest rivals show that several processors deliver nearly identical average benchmark scores. The Intel Core Ultra 7 258V scores 20454, just 0.1% below the Ryzen 5 5600's 20468 average. The AMD Ryzen 5 8500G scores 20425, a 0.2% difference. The AMD EPYC 9454P and AMD EPYC 7713 score 20422 and 20363 respectively, both within 0.5% of the Ryzen 5 5600's performance.
On the GPU side, the nearest rival is the NVIDIA GeForce RTX 3050 OEM, which scores 15199, just 0.2% below the RX 7600's 15171 average. The AMD Radeon 680M scores 15270, 0.7% higher. The AMD Radeon Pro 560X and NVIDIA GeForce GTX 660 Ti score 15082 and 15063 respectively, showing 0.6% and 0.7% differences.
These alternatives would produce nearly identical gaming performance in Downfall, as their benchmark averages are statistically indistinguishable from the tested hardware. The data suggests that swapping the Ryzen 5 5600 for any of these CPUs, or the RX 7600 for the RTX 3050 OEM, would result in frame rate differences of less than 1% in most scenarios.