Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

99%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
327 FPS
Ultra 1080p Measured
174 FPS

1440p (2K / QHD)

Low 1440p Measured
292 FPS
Ultra 1440p Measured
124 FPS

4K (Ultra HD)

Low 4K Measured
184 FPS
Ultra 4K Measured
77 FPS
3.6ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 37,018
Graphics Card
Required 27,400
Your GPU 56,083

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 77 123 151 184
1440p QHD 124 198 242 292
1080p Full HD 174 278 305 327

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 278
1920x1080 Low 327
1920x1080 Medium 305
1920x1080 Ultra 174
2560x1440 High 198
2560x1440 Low 292
2560x1440 Medium 242
2560x1440 Ultra 124
3840x2160 High 123
3840x2160 Low 184
3840x2160 Medium 151
3840x2160 Ultra 77

Performance Analysis: Downfall on Your System

The AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 5080 combination delivers overwhelming performance in Downfall, clearing the 60 FPS playability threshold at every resolution and preset tested. This pairing is so powerful that it can run the game at Ultra settings with average frame rates of 77 FPS at 4K, 124 FPS at 1440p, and 174 FPS at 1080p, making it a top-tier choice for this horror title.

Best Settings per Resolution

At 3840x2160, the most demanding preset that remains at or above 60 FPS is Ultra, which achieves an average of 77 FPS. This is not a marginal pass—the 77 FPS average provides a 17 FPS cushion over the 60 FPS threshold, indicating that even with heavy scenes, the system is unlikely to dip below playability. The High preset at 4K runs at 123 FPS, but the data shows that the hardware headroom allows you to skip it entirely and go straight to maximum visual quality.

At 2560x1440, the best settings are also Ultra, but the performance delta is far more comfortable. The average FPS jumps to 124, which is more than double the 60 FPS threshold. This makes 1440p the sweet spot for this combination, as it offers a massive performance buffer while running the game at its highest fidelity. The gap between Ultra at 1440p and High at 1440p is notable—198 FPS for High versus 124 FPS for Ultra—but both are so far above the threshold that the choice comes down to visual preference rather than playability.

At 1920x1080, the best settings are Ultra, with an average of 174 FPS. This is a high-refresh-rate scenario, where the hardware is clearly not the bottleneck. The data shows that even the most demanding preset is trivially easy for this combo at 1080p, making it suitable for users with high-Hz displays. The 174 FPS average at Ultra is more than double the 60 FPS baseline, so there is no reason to compromise on quality at this resolution.

FAQ

Q: Can this PC run Downfall at 4K resolution?

A: Yes, it can run at all settings at 3840x2160, with the best playable preset being Ultra at an average of 77 FPS. The High and Medium presets run even faster, at 123 and 151 FPS respectively.

Q: What is the highest playable preset at 1440p?

A: The Ultra preset is fully playable at 2560x1440, achieving an average of 124 FPS. This is the maximum quality setting and it still maintains a substantial frame rate margin above the 60 FPS playability threshold.

Q: How much faster is the Medium preset compared to Ultra at 1080p?

A: The Medium preset at 1920x1080 averages 305 FPS, while Ultra averages 174 FPS. This makes Medium roughly 75% faster in terms of raw average frame rate, though both remain far above the playable threshold.

Q: What are the minimum FPS figures for the Medium preset?

A: The Medium preset has the only reported minimum FPS values. At 3840x2160, the minimum is 128 FPS; at 2560x1440, it is 206 FPS; and at 1920x1080, it is 259 FPS. These minimums are all well above 60 FPS, indicating strong frame time consistency.

Q: Does the hardware ever drop below 60 FPS in the measured data?

A: The data does not record any average FPS below 77 in any resolution or preset. The lowest average is 77 FPS at 4K Ultra, so all measured scenarios clear the 60 FPS threshold.

Q: Is this the most demanding game for this hardware?

A: The combo rank in Downfall is 322 out of 3716 tested combinations, which means it is in the top 9% of all hardware pairs tested in this game, but not the absolute top. The GPU’s percentile rank is 87, while the CPU’s is 85, so it is very capable, but some other combos may perform higher.

Measured FPS Breakdown

At 3840x2160, the frame rate data shows a clear progression as settings scale down. The Ultra preset averages 77 FPS, which is the lowest average recorded for this combo. Moving to High, the average FPS rises to 123, a substantial 60% increase over Ultra. The Medium preset at 4K averages 151 FPS, with a minimum of 128 and a maximum of 173, showing that even at 4K, the frame times are consistent. The Low preset is the fastest at this resolution, with an average of 184 FPS. This scaling shows that the RTX 5080 is the dominant performance factor at 4K, and the CPU is not holding it back.

At 2560x1440, the numbers are significantly higher across the board. The Ultra preset runs at an average of 124 FPS, which is already excellent. The High preset averages 198 FPS, and the Medium preset runs at 242 FPS with a minimum of 206 and a maximum of 278. The Low preset reaches 292 FPS. The jump in performance from 4K to 1440p is substantial, indicating that the GPU still has headroom when the pixel count is reduced.

At 1920x1080, the performance is extremely high. The Ultra preset averages 174 FPS, while High averages 278 FPS. The Medium preset averages 305 FPS with a minimum of 259 and a maximum of 350. The Low preset hits 327 FPS. These numbers indicate that at 1080p, the CPU is likely the primary limiter for the lower presets, as the GPU is so fast that the frame rate is capped by the processor’s ability to issue draw calls. The difference between Low and Medium at 1080p is only 22 FPS, while the difference between Medium and High is 27 FPS, suggesting a diminishing return as the GPU load decreases.

How This Combo Ranks

In Downfall, this specific AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 5080 combination ranks 322 out of 3716 tested combos. This places it in the 91st percentile of all hardware pairs tested, meaning it is significantly faster than the vast majority of systems. The data indicates that only 322 other combinations produce higher average FPS in this game.

Given the raw performance observed, the ranking is likely held back by the CPU in certain low-resolution scenarios. At 1080p Low, the average FPS is 327, which is high but still below what a top-tier CPU might achieve. The GPU’s performance percentile is 87, and the CPU’s is 85, suggesting that the CPU is the weaker link in this pairing. However, the 4K Ultra performance of 77 FPS shows that the GPU is still strong enough to push high frame rates at the most demanding settings, so the overall rank is solidly in the top tier.

Similar Performance Alternatives

For the CPU, the nearest rivals based on average benchmark score are the AMD Ryzen 5 5600F, which scores 36945 (0.2% lower than the 5500X3D’s 37018), and the AMD Ryzen AI 7 PRO 450, which scores 37093 (0.2% higher). The Intel Core Ultra 5 225 scores 36938, and the Intel Core i9-12900T scores 37112. These processors are all within a 0.3% margin of the 5500X3D, indicating that swapping among these would yield nearly identical CPU-bound performance in Downfall. The slight 0.2-0.3% differences would translate to an imperceptible FPS difference at any resolution.

For the GPU, the nearest rivals are the AMD Radeon 8060S, which scores 55757 (0.6% slower than the RTX 5080’s 56083), and the AMD Radeon RX 6750 GRE 12 GB, which scores 55698 (0.7% slower). The AMD Radeon Pro W5700X scores 54828, which is 2.3% slower, while the AMD Radeon RX 9070 GRE scores 57367, which is 2.2% faster. These GPUs would produce very similar frame rates in the game. For instance, replacing the RTX 5080 with an RX 9070 GRE would likely yield a small FPS increase, while a Radeon RX 6750 GRE would produce slightly lower frame rates but still maintain high performance.

The Verdict

Can this PC run Downfall? Yes, unequivocally. The verdict-by-resolution data shows that at 3840x2160, all four presets—Low, Medium, High, and Ultra—are playable, with the best setting being Ultra at an average of 77 FPS. At 2560x1440, Ultra is playable at 124 FPS. At 1920x1080, Ultra is playable at 174 FPS. The playable threshold is 60 FPS, and every single measured configuration exceeds it by a massive margin.

The lowest average FPS recorded in the entire dataset is 77 FPS, which occurs at 4K Ultra. This means that there is no scenario in this benchmark suite where the combination drops below the playability threshold. The hardware is powerful enough to handle the game at maximum settings in 4K, with a 17 FPS buffer for demanding scenes. At 1440p and 1080p, the margin is even more comfortable, ranging from 64 to 267 FPS above the threshold.

The data indicates that this is a high-end system for Downfall, and the only reason to consider lower settings would be to achieve extremely high refresh rates. Even the most demanding Ultra preset at 4K is already above 60 FPS, making this combo a safe choice for any display resolution up to 4K with maxed-out graphics settings. The RTX 5080’s 16 GB of GDDR7 memory and 960.0 GB/s bandwidth is more than sufficient for this game, and the Ryzen 5 5500X3D’s 6 cores and 12 threads provide ample CPU performance for the horror title.