Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 90 | 144 | 175 | 214 |
| 1440p QHD | 144 | 230 | 246 | 265 |
| 1080p Full HD | 202 | 257 | 276 | 296 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
Best Settings per Resolution
At 1920x1080, the AMD Ryzen 5 4600G with the NVIDIA GeForce RTX 5090 D can run Downfall at Ultra settings with an average of 202 FPS. This is the most demanding preset that stays well above the 60 FPS playable threshold. The data shows a comfortable margin, meaning even the most visually intensive scenes should remain fluid.
Moving to 2560x1440, the Ultra preset still holds at an average of 144 FPS. That is exactly double the playable threshold, so there is substantial headroom for fluctuations during intense horror sequences. The GPU is clearly not struggling at this resolution.
At 3840x2160, the Ultra preset delivers an average of 90 FPS. This remains above 60 FPS, making it the best playable setting for 4K. The measured average of 90 FPS suggests the combination can handle 4K Ultra without dropping into uncomfortable territory, though the margin is thinner than at lower resolutions.
For all three resolutions, the recommendation is straightforward: use Ultra settings. The data indicates every preset from Low through Ultra is playable, but Ultra provides the highest visual quality while still exceeding the 60 FPS minimum. If a player prefers maximum frame rates over visual fidelity, the Low presets offer significantly higher averages, but that is a preference choice rather than a necessity.
CPU and GPU Roles
The recorded data reveals an interesting balance between the Ryzen 5 4600G and the RTX 5090 D across resolutions. At 1920x1080, the average FPS for Ultra is 202, at 2560x1440 it drops to 144, and at 3840x2160 it falls to 90. This scaling pattern shows that the GPU becomes progressively more dominant as resolution increases, which is typical for a horror game with heavy visual effects.
The CPU, with its 6 cores and 12 threads based on Zen 2 architecture, appears sufficient to feed the RTX 5090 D even at 1080p. The difference between 1080p Ultra (202 FPS) and 1440p Ultra (144 FPS) is roughly a 29% reduction, while the jump from 1440p to 4K Ultra (90 FPS) is a 37.5% reduction. These proportions suggest that at 1080p, the CPU is likely contributing more to the overall frame rate, while at 4K, the GPU's rendering load dominates.
Looking at preset scaling within a resolution provides further insight. At 3840x2160, Low averages 214 FPS, Medium averages 175 FPS, and Ultra averages 90 FPS. The drop from Low to Ultra is substantial, indicating that the GPU's shading units, texture mapping units, and raster operations pipelines are heavily taxed by higher settings. The RTX 5090 D has 21760 shading units and 176 ROPs, which explains why it still manages 90 FPS at 4K Ultra, but the scaling shows the GPU is the limiting factor at that resolution.
At 1920x1080, the spread is narrower: Low at 296 FPS, Medium at 276 FPS, and Ultra at 202 FPS. The smaller gap between Low and Medium (about 7%) compared to Medium and Ultra (about 27%) suggests that at 1080p, the CPU's single-thread performance (with a 3DMark single-thread score of 726) may start to cap the frame rate before the GPU reaches its limit. The Ryzen 5 4600G's boost clock of 4.20 GHz is respectable, but it is not a high-end gaming CPU by modern standards.
For 1440p, the pattern sits in between. Low averages 265 FPS, Medium 246 FPS, and Ultra 144 FPS. The CPU still has influence, but the GPU workload is increasing. Players at 1440p with a 144 Hz monitor will find the Ultra preset adequate, while those with higher refresh displays might prefer Medium or Low for extra headroom.
Measured FPS Breakdown
1920x1080:
- Low: average 296 FPS, no min/max recorded
- Medium: average 276 FPS, minimum 234 FPS, maximum 317 FPS
- High: average 257 FPS, no min/max recorded
- Ultra: average 202 FPS, no min/max recorded
The Medium preset at 1080p shows a minimum of 234 FPS, which is still far above the 60 FPS threshold. The maximum of 317 FPS indicates that the combination can burst well beyond averages in less demanding scenes.
2560x1440:
- Low: average 265 FPS, no min/max recorded
- Medium: average 246 FPS, minimum 209 FPS, maximum 283 FPS
- High: average 230 FPS, no min/max recorded
- Ultra: average 144 FPS, no min/max recorded
At 1440p Medium, the minimum of 209 FPS shows consistent performance. The spread between minimum and maximum is 74 FPS, which is moderate and suggests stable frame pacing. The Ultra preset's 144 FPS average aligns exactly with common 144 Hz monitor refresh rates.
3840x2160:
- Low: average 214 FPS, no min/max recorded
- Medium: average 175 FPS, minimum 149 FPS, maximum 202 FPS
- High: average 144 FPS, no min/max recorded
- Ultra: average 90 FPS, no min/max recorded
At 4K Medium, the minimum of 149 FPS remains well above 60 FPS. The Ultra preset's 90 FPS average is the lowest recorded figure for this combination, but it still clears the playable threshold by 50%. The data shows no scenario where this hardware drops below 60 FPS in Downfall.
Similar Performance Alternatives
For the CPU, the Ryzen 5 4600G sits at the 71st percentile among all CPUs with an average benchmark score of 17507. Its nearest rivals in the database are closely matched. The AMD Ryzen 3 PRO 5355GE has an average score of 17482, which is 0.1% lower, meaning performance is effectively identical. The AMD Ryzen 3 8300GE scores 17614, 0.6% higher, so it would behave nearly the same in Downfall. The Intel Core 7 150U scores 17395, 0.6% lower, and the Intel Core i3-14100T scores 17648, 0.8% higher. Any of these processors would deliver comparable CPU-bound performance in this game.
For the GPU, the RTX 5090 D ranks at the 92nd percentile among all GPUs with an average benchmark score of 77712. Its nearest rivals include the AMD Radeon RX 6650M XT with a score of 76904, which is 1.1% lower. The AMD Radeon RX 6850M XT scores 78940, 1.6% higher. The NVIDIA Tesla P100 PCIe 12 GB scores 79396, 2.1% higher, and the Tesla P100 PCIe 16 GB scores 79605, 2.4% higher. These deltas are small enough that any of these GPUs would produce almost identical frame rates in Downfall at all resolutions and settings tested.
The practical takeaway is that if a builder cannot find the exact RTX 5090 D or Ryzen 5 4600G, swapping in any of these rivals would change the experience by only a few percent. The combination's overall ranking of 226 out of 3716 tested combos places it in the top 6% of all systems, so these near-identical alternatives would also rank highly.
FAQ
Q: Can this system run Downfall at 4K with maximum settings?
A: Yes, the recorded data shows 3840x2160 Ultra averaging 90 FPS, which is above the 60 FPS playable threshold. All presets at 4K are playable, including Low at 214 FPS, Medium at 175 FPS, and High at 144 FPS.
Q: What is the best setting for 1440p gaming?
A: Ultra settings at 2560x1440 produce an average of 144 FPS, making it the best choice for visual quality while maintaining exactly double the playable threshold. If higher frame rates are desired, Medium averages 246 FPS and Low averages 265 FPS.
Q: How does the CPU compare to its nearest rivals?
A: The Ryzen 5 4600G has an average benchmark score of 17507, placing it at the 71st percentile. Its closest rival, the Ryzen 3 PRO 5355GE, scores 17482, only 0.1% lower. The Intel Core i3-14100T scores 17648, 0.8% higher, so all four nearest rivals are virtually interchangeable.
Q: Is the RTX 5090 D overkill for this game?
A: The data suggests the GPU is very powerful for Downfall, as even at 4K Ultra it maintains 90 FPS. The GPU ranks at the 92nd percentile, and its nearest rivals like the RX 6650M XT are within 1.1% performance, so the system has substantial headroom for future titles.
Q: What frame rate can I expect at 1080p with Medium settings?
A: The measured average is 276 FPS with a minimum of 234 FPS and a maximum of 317 FPS. This is far beyond any standard display refresh rate, so the CPU and GPU combination is not a bottleneck at this resolution.
Q: How does this combo rank among all tested systems?
A: The AMD Ryzen 5 4600G and NVIDIA GeForce RTX 5090 D combination ranks 226th out of 3716 tested combos, placing it in the top 6% of all systems in the database for Downfall performance.
How This Combo Ranks
The combination of the AMD Ryzen 5 4600G and NVIDIA GeForce RTX 5090 D achieves a combo rank of 226 out of 3716 total tested combinations in the database for Downfall. This places the system comfortably in the upper tier, roughly in the 94th percentile of all tested hardware pairings.
The ranking is notable because it pairs a mid-range CPU from the 4000 series with a flagship GPU from the GeForce 50-series. The CPU's 71st percentile standing among all CPUs might suggest a bottleneck, but the measured data does not support that concern at the resolutions tested. Even at 1080p, where CPU influence is strongest, the system maintains 202 FPS on Ultra, which is far above any practical display requirement.
The GPU's 92nd percentile ranking dominates the overall score. The RTX 5090 D's raw compute capabilities, including 104.8 TFLOPS of FP32 performance and 32 GB of GDDR7 memory, provide massive headroom for this 2016 horror title. The game's age means it does not stress modern hardware the way recent releases might, which explains why this pairing ranks so highly.
For context, the CPU's nearest rivals are all within 0.8% of its average benchmark score, and the GPU's nearest rivals are within 2.4%. This means the combo rank is stable; swapping in any of these alternatives would likely produce a similar ranking. The 226th position out of 3716 indicates that only a small fraction of tested systems outperform this pairing in Downfall.
Players using this combination should feel confident that they are near the top of the performance curve for this game. The only systems ranked higher would typically feature even stronger CPUs paired with the same or similar GPUs, but the practical difference in frame rates would be minimal given the already high averages recorded. The data shows this is a top-tier pairing for Downfall, with no playability concerns at any resolution or preset.