Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

79%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
250 FPS
Ultra 1080p Measured
181 FPS

1440p (2K / QHD)

Low 1440p Measured
223 FPS
Ultra 1440p Measured
144 FPS

4K (Ultra HD)

Low 4K Measured
191 FPS
Ultra 4K Measured
90 FPS
4.6ms Frame Time
7ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 21,484
Graphics Card
Required 27,400
Your GPU 77,712

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 90 144 175 191
1440p QHD 144 194 208 223
1080p Full HD 181 217 233 250

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 217
1920x1080 Low 250
1920x1080 Medium 233
1920x1080 Ultra 181
2560x1440 High 194
2560x1440 Low 223
2560x1440 Medium 208
2560x1440 Ultra 144
3840x2160 High 144
3840x2160 Low 191
3840x2160 Medium 175
3840x2160 Ultra 90

Performance Analysis: Downfall on Your System

Measured FPS Breakdown

At 3840x2160, the combination of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 5090 D delivers a wide spread of frame rates depending on the preset. On Low settings, the average FPS is 191, which is an extremely high baseline for a 4K resolution. Moving to Medium, the average drops to 175 FPS, with a recorded minimum of 149 FPS and a maximum of 202 FPS, indicating smooth frame pacing even when the scene load increases. High settings bring the average down to 144 FPS, which still comfortably exceeds any 60 FPS threshold. The most demanding preset at this resolution, Ultra, produces an average of 90 FPS, showing that the GPU has substantial headroom but the CPU begins to limit the maximum output as the workload shifts.

At 2560x1440, the same pattern continues with higher overall throughput. Low settings yield an average of 223 FPS, while Medium averages 208 FPS with a minimum of 177 FPS and a maximum of 239 FPS. High settings average 194 FPS, and Ultra settings still manage an average of 144 FPS. The delta between Low and Ultra at 1440p is 79 FPS, which is a narrower gap than at 4K, where the delta is 101 FPS. This suggests that at lower resolutions, the CPU becomes a more significant factor, compressing the performance difference between presets.

At 1920x1080, the results show the highest frame rates in the entire dataset. Low settings average 250 FPS, Medium averages 233 FPS with a minimum of 198 FPS and a maximum of 268 FPS, High averages 217 FPS, and Ultra averages 181 FPS. The minimum recorded value at 1080p Medium, 198 FPS, is still more than triple the playable threshold, meaning there is no scenario in the measured data where this combo dips near 60 FPS. The scaling from 4K to 1080p is notable: at Ultra settings, the average FPS rises from 90 at 4K to 144 at 1440p and then to 181 at 1080p, a 101% increase from 4K to 1080p.

FAQ

Q: Can this system run Downfall at 60 FPS on Ultra settings at 4K?

A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 90 FPS, which is above the 60 FPS playable threshold. The verdictByResolution data confirms Ultra is playable at 4K.

Q: What is the best settings preset at 1440p for this combo?

A: The best settings at 2560x1440 are Ultra, with an average FPS of 144. All four presets (Low, Medium, High, Ultra) are listed as playable at this resolution.

Q: How does the RTX 5090 D compare to its nearest rivals in synthetic benchmarks?

A: The RTX 5090 D has an average benchmark score of 77712. The AMD Radeon RX 6650M XT scores 76904, which is 1.1% lower. The AMD Radeon RX 6850M XT scores 78940, which is 1.6% higher. The NVIDIA Tesla P100 PCIe 12 GB and 16 GB variants score 79396 and 79605, respectively, putting them 2.1% and 2.4% ahead.

Q: What is the frame rate difference between Low and Ultra at 1080p?

A: At 1920x1080, Low settings average 250 FPS while Ultra settings average 181 FPS, a difference of 69 FPS. The minimum recorded FPS at Medium (198) is still higher than the Ultra average at 4K (90).

Q: Is the Ryzen 5 2600 a bottleneck at any resolution?

A: The data suggests the CPU becomes more relevant at lower resolutions. The FPS gap between Low and Ultra narrows as resolution decreases: 101 FPS at 4K, 79 FPS at 1440p, and 69 FPS at 1080p. This indicates that at 1080p, the CPU limits the GPU's ability to fully express its power, but the absolute frame rates remain very high.

Q: What percentile does the RTX 5090 D rank among all GPUs?

A: The RTX 5090 D is in the 92nd percentile among all GPUs, based on its average benchmark score. The Ryzen 5 2600 is in the 75th percentile among all CPUs.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 90 FPS. This is the highest quality setting available in the measured data, and it clears the threshold with a 30 FPS margin. Lower presets also work, but Ultra is the best choice for visual fidelity without sacrificing playability.

At 2560x1440, the best settings are also Ultra, with an average FPS of 144. This is exactly double the playable threshold, providing substantial headroom for scene complexity or future patches. All four presets are playable, but Ultra is the recommended choice given the measured performance.

At 1920x1080, Ultra settings average 181 FPS, which is the best settings option at this resolution. The minimum FPS recorded across any preset at 1080p is 198 FPS (Medium), so even the most demanding preset never approaches the 60 FPS line. Ultra is the clear pick.

Similar Performance Alternatives

For the CPU, the AMD Ryzen 5 2600 has an average benchmark score of 21484. Its nearest rivals are extremely close in synthetic performance. The Intel Core Ultra 5 228V scores 21440, which is only 0.2% lower. The Intel Core i9-11900H scores 21367, 0.5% lower. On the other side, the Intel Xeon D-1746TER scores 21635, 0.7% higher, and the AMD EPYC 9454 scores 21223, 1.2% lower. In practical terms, any of these CPUs would produce nearly identical frame rates in Downfall when paired with the RTX 5090 D, because the differences are within a couple of percentage points. The Ryzen 5 2600 sits in the 75th percentile of all CPUs, so it is a mid-to-upper tier processor, and these rivals represent the same performance class.

For the GPU, the NVIDIA GeForce RTX 5090 D has an average benchmark score of 77712 and ranks in the 92nd percentile. The nearest rival is the AMD Radeon RX 6650M XT, which scores 76904, a 1.1% deficit. The AMD Radeon RX 6850M XT scores 78940, which is 1.6% ahead. The NVIDIA Tesla P100 PCIe 12 GB and 16 GB variants score 79396 and 79605, respectively, meaning they are 2.1% and 2.4% faster in synthetic benchmarks. These differences are small enough that in a real game like Downfall, the frame rates would be nearly indistinguishable. A user with an RX 6850M XT or a Tesla P100 would see roughly the same FPS at the same settings, while an RX 6650M XT would be marginally slower. The RTX 5090 D's 32 GB of GDDR7 memory and 512-bit bus provide a bandwidth of 1.79 TB/s, but the synthetic scores show that its compute characteristics align closely with those rivals.

How This Combo Ranks

In the database of tested combinations for Downfall, this pairing of the AMD Ryzen 5 2600 and the NVIDIA GeForce RTX 5090 D ranks 589th out of 3716 tested combos. That places it in the top 15.9% of all tested systems. The rank reflects the combined capability of both components, and given that the GPU is in the 92nd percentile while the CPU is in the 75th percentile, the overall rank is dragged down slightly by the older processor. However, the measured frame rates are exceptionally high across all resolutions and presets, so the rank is more a reflection of the CPU's synthetic score relative to other tested CPUs than an indication of real-world inadequacy. The combo outperforms the median tested system by a wide margin, and the data shows no scenario where it falls below the 60 FPS threshold.

The Verdict

This PC can run Downfall at every resolution and preset combination recorded in the database. At 3840x2160, the verdictByResolution lists High, Low, Medium, and Ultra as playable, with Ultra averaging 90 FPS. At 2560x1440, all four presets are playable, with Ultra averaging 144 FPS. At 1920x1080, all four presets are playable, with Ultra averaging 181 FPS. The playable threshold is defined as 60 FPS, and the lowest average FPS across the entire dataset is 90 FPS (4K Ultra), which is 50% above the threshold. The lowest recorded minimum FPS is 149 FPS (4K Medium), meaning even the worst-case frame dips stay far above 60 FPS. There is no configuration in the measured data where this system struggles to maintain smooth gameplay. The only caveat is that the CPU, being from 2018, may limit the GPU's potential at lower resolutions, but the absolute numbers are so high that this limitation is purely academic for Downfall.

CPU and GPU Roles

The data reveals a clear division of labor between the CPU and GPU across resolutions. At 3840x2160, the GPU is the dominant factor. The FPS delta between Low and Ultra is 101 FPS (191 vs 90), which is the largest spread in the dataset. This indicates that the GPU's workload scales heavily with visual settings, and the CPU has enough headroom to feed the GPU at this resolution. The 4K Ultra average of 90 FPS, while high, is the lowest in the dataset, showing that the GPU is the limiting component when pixel count is maximal.

At 2560x1440, the CPU begins to exert more influence. The FPS delta between Low and Ultra narrows to 79 FPS (223 vs 144). The average FPS at Ultra is 144, which is exactly the same as the 4K High average (144). This suggests that the CPU is starting to cap the maximum frame rate, because the GPU could otherwise produce higher FPS at a lower resolution. The fact that 1440p Ultra matches 4K High, rather than exceeding it, is a sign of CPU limitation.

At 1920x1080, the CPU's role becomes even more pronounced. The FPS delta between Low and Ultra shrinks to 69 FPS (250 vs 181). The 1080p Ultra average of 181 FPS is only 37 FPS higher than the 1440p Ultra average of 144 FPS, despite the pixel count dropping by 56%. If the GPU were the only constraint, the 1080p Ultra number would be significantly higher. Instead, the CPU's single-thread performance (Geekbench single-core score of 1154, Passmark single-thread score of 2239) limits the scene's ability to be processed faster. The Ryzen 5 2600 has 6 cores and 12 threads, which is sufficient for this horror game, but its Zen architecture and 12 nm process node prevent it from pushing the RTX 5090 D to its full potential at lower resolutions. In summary, the GPU dictates the experience at 4K, while the CPU becomes the limiting factor at 1440p and especially at 1080p, even though the resulting frame rates are still far above playable levels.