Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

74%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
203 FPS
Ultra 1080p Measured
122 FPS

1440p (2K / QHD)

Low 1440p Measured
131 FPS
Ultra 1440p Measured
79 FPS

4K (Ultra HD)

Low 4K Measured
71 FPS
Ultra 4K Measured
43 FPS
6.7ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 32,697
Graphics Card
Required 27,325
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 43 52 62 71
1440p QHD 79 97 114 131
1080p Full HD 122 149 177 203

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 149
1920x1080 Low 203
1920x1080 Medium 177
1920x1080 Ultra 122
2560x1440 High 97
2560x1440 Low 131
2560x1440 Medium 114
2560x1440 Ultra 79
3840x2160 High 52
3840x2160 Low 71
3840x2160 Medium 62
3840x2160 Ultra 43

Performance Analysis: Doom on Your System

How This Combo Ranks

The Intel Core Ultra 7 155H paired with the NVIDIA GeForce RTX 4060 places at rank 2270 out of 3712 tested combinations in the database for Doom. That positions this build in the upper half of all recorded configurations, roughly the 61st percentile of tested combos. It is not a top-tier enthusiast setup, but it sits comfortably above the median, which matters more for a game like Doom that scales well with raw throughput rather than demanding advanced hardware.

The percentile data reinforces this. The CPU ranks in the 83rd percentile against all processors, while the GPU sits in the 61st percentile against all graphics cards. The asymmetry here is notable: the processor is substantially stronger relative to its peers than the graphics card. In practice, this means the RTX 4060 is the limiting factor in most scenarios, but the Core Ultra 7 155H provides enough headroom that the GPU is rarely starved for data. The recorded frame rates confirm this balance, as the system delivers playable performance at every resolution tested, with the caveat that 4K Ultra drops below the 60 FPS threshold.

CPU and GPU Roles

Benchmark results indicate that the RTX 4060 is the dominant component for Doom at higher resolutions, while the Core Ultra 7 155H becomes more relevant at lower resolutions where frame rates climb toward the CPU's ceiling. This is a classic division of labor for a fast-paced FPS.

At 3840x2160, the GPU is clearly the bottleneck. The average frame rate at High settings is 52 FPS, and at Ultra it falls to 43 FPS. Dropping to Low settings raises the average to 71 FPS, a gain of 19 FPS over High, which is a purely GPU-bound shift. The CPU has little influence here because the pixel throughput demand is so high that even a stronger processor would not move the needle. The Medium preset shows a 62 FPS average with a minimum of 53 and a maximum of 71, which illustrates how the GPU's workload scales with settings more than the CPU's involvement.

At 2560x1440, the balance shifts. High settings deliver 97 FPS average, Low hits 131 FPS, and Ultra still manages 79 FPS. The spread between Low and Ultra is 52 FPS, which is still substantial, but the fact that Ultra clears 60 FPS suggests the GPU is no longer the sole constraint. The Core Ultra 7 155H's 22 threads and strong single-core performance, reflected in its Cinebench R23 single-core score of 1743, keep the frame pacing stable even when the GPU is not fully saturated.

At 1920x1080, the CPU's role becomes more visible. Low settings produce a 203 FPS average, and Medium reaches 177 FPS. These are high enough that the CPU's per-core performance starts to matter, as the GPU is capable of far more than the engine can request. The Ultra preset still delivers 122 FPS, which means the CPU is not a hard wall, but the scaling from Low to Ultra (a drop of 81 FPS) is less than the resolution scaling alone would suggest. The data shows that this combo is well matched for 1080p and 1440p gaming, with the GPU taking the lead at 4K and the CPU providing headroom at lower resolutions.

Similar Performance Alternatives

Looking at the nearest rivals in the database, the Core Ultra 7 155H's closest CPU peers are the Intel Core i5-14600T, the AMD Ryzen AI 7 PRO 360, the AMD Ryzen 5 7400F, and the AMD Ryzen 7 PRO 6850H. The average benchmark scores are nearly identical: the i5-14600T scores 32707 (0% delta), the Ryzen AI 7 PRO 360 scores 32662 (0.1% delta), the Ryzen 5 7400F scores 32750 (-0.2% delta), and the Ryzen 7 PRO 6850H scores 32812 (-0.4% delta). In practical terms, any of these processors would produce statistically indistinguishable frame rates in Doom when paired with the same RTX 4060. The differences are within measurement noise, so users upgrading from one to another would not notice a change in performance.

For the GPU, the nearest rivals are the AMD Radeon HD 7790, the AMD Radeon 780M, the AMD Radeon Pro 560, and the AMD Radeon Pro 460. Their average scores are 17666 (-0.2% delta), 17588 (0.3% delta), 17551 (0.5% delta), and 17509 (0.7% delta), respectively. Again, the deltas are tiny, all within a single percentage point. This is unusual for a modern card like the RTX 4060, as most of its peers in the database are older or integrated parts. The Radeon 780M is an integrated GPU, which suggests that the RTX 4060's performance level is comparable to a high-end iGPU in synthetic benchmarks, though the dedicated card has far more consistent sustained performance and better driver support for a game like Doom.

The practical takeaway is that swapping the CPU for any of these rivals would not change the playable settings or frame rates in any meaningful way. The same applies to the GPU, though the Radeon 780M would likely show more variance in real-world gaming due to shared memory and thermal constraints. The recorded data does not cover those scenarios, so this remains a qualitative observation.

The Verdict

This PC can run Doom, and it does so well at most settings. The verdict by resolution is clear: at 1920x1080, all four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold, with the best setting being Ultra at 122 FPS average. At 2560x1440, again all four presets are playable, with Ultra delivering 79 FPS average. At 3840x2160, only Low and Medium are playable, with Medium being the best choice at 62 FPS average. High and Ultra fall short at 52 FPS and 43 FPS, respectively.

The 60 FPS playable threshold is met or exceeded in 10 out of 12 tested configurations. The only failures are at 4K High and 4K Ultra. For a game from 2016, this is strong performance, especially considering the RTX 4060 is a mid-range mobile and desktop card that has been marked end-of-life in the database. The Core Ultra 7 155H, with its 16 cores and 22 threads, provides more than enough computation for Doom's engine, which is not particularly CPU-intensive. The bottleneck at 4K is purely the GPU's fill rate and memory bandwidth, which are capped at 272.0 GB/s on a 128-bit bus.

Measured FPS Breakdown

The recorded measurements cover three resolutions and four settings each, with average, minimum, and maximum frame rates captured for the Medium preset at each resolution.

At 3840x2160, the results are as follows:

  • High: 52 FPS average, no min/max recorded.
  • Low: 71 FPS average, no min/max recorded.
  • Medium: 62 FPS average, 53 FPS minimum, 71 FPS maximum.
  • Ultra: 43 FPS average, no min/max recorded.

The Medium preset's minimum of 53 FPS is below the 60 FPS threshold, which means there are brief dips into sub-60 territory even though the average is playable. This is worth noting for users who are sensitive to frame pacing. The 18 FPS gap between the maximum and minimum indicates some variance, but it is not severe enough to cause noticeable stuttering in a game that runs at this speed.

At 2560x1440, the results improve significantly:

  • High: 97 FPS average, no min/max recorded.
  • Low: 131 FPS average, no min/max recorded.
  • Medium: 114 FPS average, 97 FPS minimum, 132 FPS maximum.
  • Ultra: 79 FPS average, no min/max recorded.

The Medium preset here has a minimum of 97 FPS, which is well above the playable threshold. The 35 FPS spread between minimum and maximum is larger in absolute terms but smaller as a percentage of the average. This resolution is the sweet spot for this combo, as even the most demanding preset stays comfortably above 60 FPS.

At 1920x1080, the results are the strongest:

  • High: 149 FPS average, no min/max recorded.
  • Low: 203 FPS average, no min/max recorded.
  • Medium: 177 FPS average, 150 FPS minimum, 203 FPS maximum.
  • Ultra: 122 FPS average, no min/max recorded.

The Medium preset's minimum of 150 FPS is exceptionally high, meaning the system never drops below triple-digit frame rates even in the most intense scenes. The maximum of 203 FPS matches the Low preset's average, which suggests the Medium setting is not significantly taxing the GPU at this resolution. The Ultra preset's 122 FPS average is still more than double the playable threshold.

Best Settings per Resolution

For each resolution, the most demanding preset that stays at or above 60 FPS average is:

  • At 3840x2160, the best setting is Medium, which delivers a 62 FPS average. High and Ultra are not playable, as they drop to 52 FPS and 43 FPS, respectively. Low is playable at 71 FPS, but Medium is the highest quality option that meets the threshold.
  • At 2560x1440, the best setting is Ultra, which delivers a 79 FPS average. All presets clear 60 FPS here, so the choice comes down to visual fidelity versus frame rate headroom. Ultra is the right pick for a balanced experience.
  • At 1920x1080, the best setting is Ultra, which delivers a 122 FPS average. This is the highest preset available, and it still leaves ample margin above the 60 FPS threshold. Users with high refresh rate monitors will benefit from the headroom, as the minimum recorded FPS at Medium is 150, suggesting the Ultra preset likely stays well above 100 FPS in most scenes.

The data shows a clear pattern: the RTX 4060 can handle Doom at max settings up to 1440p, but 4K requires a compromise. Dropping to Medium at 4K is the recommended path for users who want the higher resolution without sacrificing playability.

FAQ

Q: Can this PC run Doom at 4K with max settings?

A: No. At 3840x2160 with Ultra settings, the average frame rate is 43 FPS, which is below the 60 FPS playable threshold. The best playable setting at 4K is Medium, which delivers a 62 FPS average.

Q: What is the best resolution for this combo in Doom?

A: 2560x1440 with Ultra settings provides a 79 FPS average, which is the highest quality preset that remains comfortably above 60 FPS. At 1920x1080, Ultra runs at 122 FPS, which is faster but at a lower resolution.

Q: How does the RTX 4060 compare to its nearest GPU rivals?

A: The RTX 4060's average benchmark score is 17639. Its closest rival, the AMD Radeon HD 7790, scores 17666 (0.2% higher). The AMD Radeon 780M scores 17588 (0.3% lower), and the AMD Radeon Pro 560 scores 17551 (0.5% lower). All are within one percentage point.

Q: Is the CPU or GPU more important for Doom at 1080p?

A: At 1920x1080, the CPU becomes more relevant because frame rates are high enough (203 FPS on Low) that per-core performance matters. The Core Ultra 7 155H's Cinebench R23 single-core score of 1743 and multi-core score of 15028 provide sufficient headroom.

Q: Does the Medium preset at 4K ever drop below 60 FPS?

A: Yes. The 3840x2160 Medium preset has a recorded minimum of 53 FPS, even though the average is 62 FPS. Users who are sensitive to frame dips may notice occasional slowdowns.

Q: What settings are playable at 1440p?

A: All four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold at 2560x1440. The Ultra preset averages 79 FPS, High averages 97 FPS, Medium averages 114 FPS, and Low averages 131 FPS.