Instant compatibility check with FPS benchmarks and optimization tips
Doom
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 48 | 59 | 70 | 80 |
| 1440p QHD | 89 | 108 | 128 | 147 |
| 1080p Full HD | 137 | 167 | 198 | 228 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Doom on Your System
The Intel Core Ultra 5 245 paired with the NVIDIA GeForce RTX 4060 delivers a solid, if not spectacular, performance profile for running Doom (2016). Benchmark data places this combination at rank 2001 out of 3712 tested combos for this specific game, positioning it in the upper-middle tier of systems. The measured frame rates across resolutions and presets show a clear pattern: this combo is fully capable of exceeding the 60 FPS playability threshold at 1440p and 1080p across all settings, while 4K requires dropping to Medium or Low to stay smooth. The data indicates a balanced system where the GPU becomes the primary constraint at higher resolutions, but the CPU's strong single-thread performance ensures no bottleneck at lower settings.
How This Combo Ranks
The Intel Core Ultra 5 245 + RTX 4060 combination ranks 2001 out of 3712 tested configurations in Doom. This places it at roughly the 54th percentile of all tested combos, meaning slightly more than half of the systems in the database achieve better frame rates in this title. Given that Doom (2016) is an older, well-optimized FPS, the ranking reflects that this hardware is mid-pack rather than top-tier for this specific workload.
The CPU itself sits in the 90th percentile among all CPUs tested across the database, with an average benchmark score of 48995. This is a strong result, indicating the processor is well above average for general compute tasks. However, the GPU only reaches the 61st percentile among all GPUs, with an average score of 17639. The combination of a high-performing CPU with a mid-range GPU explains why the overall game ranking is not higher — the graphics card is the limiting factor.
The rank of 2001 out of 3712 suggests that while this system handles Doom comfortably, there are many combinations with stronger GPUs that push higher frame rates. The measured data supports this: at 1080p Ultra, the combo achieves 137 FPS, which is good, but systems with higher-tier GPUs would likely exceed 200 FPS. The ranking is not a reflection of failure — 54% of combos tested are worse — but it does indicate headroom for improvement if a more powerful GPU were paired with this CPU.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the Intel Core Ultra 5 245 performs within 1% of several other processors. The AMD Ryzen 7 PRO 5755G scores 49196, a delta of -0.4% relative to the Ultra 5, meaning they are effectively identical in average benchmark performance. The AMD Ryzen 9 7900 scores 49228 (-0.5%), and the Intel Xeon Gold 5318H scores 48698 (+0.6%). The Intel Core i5-14600K scores 48618 (+0.8%). In practical terms, any of these CPUs paired with the same RTX 4060 would produce nearly identical frame rates in Doom, as the game is not CPU-bound at the tested settings.
For the GPU, the RTX 4060’s nearest rivals are all AMD products with remarkably close average scores. The AMD Radeon HD 7790 scores 17666 (-0.2%), the AMD Radeon 780M scores 17588 (+0.3%), the AMD Radeon Pro 560 scores 17551 (+0.5%), and the AMD Radeon Pro 460 scores 17509 (+0.7%). All four are within less than 1% of the RTX 4060’s average GPU score of 17639. This means that swapping the RTX 4060 for any of these cards would yield essentially the same performance in Doom — differences of a few FPS at most. The Radeon 780M is particularly notable as an integrated GPU that matches the RTX 4060’s discrete performance in this benchmark metric, though the RTX 4060 has dedicated VRAM and drivers that may behave differently in real gaming scenarios.
The practical implication is that a system with an RTX 4060 and a Ryzen 9 7900 would perform nearly identically to the tested combo. Similarly, a build with an Intel Core Ultra 5 245 and a Radeon 780M would be a close match in raw GPU compute, though the RTX 4060’s 8 GB GDDR6 memory versus the 780M’s shared system memory could affect higher-resolution textures. For Doom, these rival components would deliver within 1-2 FPS of the measured results.
CPU and GPU Roles
The benchmark data reveals how the workload shifts between CPU and GPU across resolutions. At 1080p, the RTX 4060 is not heavily taxed, and frame rates are high across all presets. The jump from Low to Ultra at 1080p shows a drop from 228 FPS to 137 FPS, a reduction of 91 FPS or roughly 40%. This scaling is almost entirely GPU-driven, as the CPU has ample headroom at these frame rates — the Ultra 5 245’s 14 cores and 5.10 GHz boost clock are more than sufficient for Doom’s engine at 1080p.
Moving to 1440p, the same pattern holds but with lower absolute numbers. Low preset delivers 147 FPS, Medium 128 FPS, High 108 FPS, and Ultra 89 FPS. The delta between Low and Ultra is 58 FPS (about 39%), very similar to the 1080p scaling. This suggests the GPU is still the dominant factor, and the CPU is not introducing a bottleneck even as frame rates remain well above 60 FPS.
At 4K (3840x2160), the picture changes notably. Low preset yields 80 FPS, Medium 70 FPS, High 59 FPS, and Ultra 48 FPS. The drop from Low to Ultra is 32 FPS (40% reduction), consistent with the lower resolutions, but the absolute values now approach the playability threshold. The High preset falls below 60 FPS at 59 FPS, and Ultra drops to 48 FPS. This is purely a GPU limitation — the RTX 4060’s 8 GB memory and 272.0 GB/s bandwidth struggle with 4K rendering, even in a 2016 title. The CPU’s role diminishes further at this resolution because frame rates are lower, reducing the per-frame CPU work required.
The data shows that across all resolutions, the GPU is the primary performance determinant. The CPU’s influence is minimal — even at 1080p Low with 228 FPS, the Ultra 5 245 keeps up without issue. The scaling between 1080p and 4K at the same preset (e.g., Medium: 198 FPS to 70 FPS) is roughly 65% reduction, which aligns with the pixel-count increase (4K has about 4 times the pixels of 1080p, but frame rates don’t drop proportionally due to GPU architecture and memory bandwidth constraints). This combo is GPU-bound in all tested scenarios, but the CPU ensures that low-resolution high-FPS scenarios don’t hit a compute ceiling.
The Verdict
Can this PC run Doom? The verdict by resolution is clear and positive for most settings. At 1920x1080, all four presets — Low, Medium, High, and Ultra — exceed the 60 FPS playability threshold. The best settings at 1080p are Ultra, with an average of 137 FPS. At 2560x1440, all presets also clear 60 FPS, with Ultra averaging 89 FPS. The best 1440p setting is Ultra, matching the 1080p result. At 3840x2160, only Low and Medium are playable: Low averages 80 FPS and Medium averages 70 FPS. High falls to 59 FPS, just below the threshold, and Ultra drops to 48 FPS. The best playable 4K setting is Medium at 70 FPS.
In practical terms, this system runs Doom smoothly at 1080p and 1440p with maximum graphical settings, and at 4K with medium settings. The 60 FPS threshold is the reference point, and the data shows this combo clears it comfortably at the two lower resolutions. The 4K High preset’s 59 FPS is a marginal miss — one frame short — but the Medium preset provides a comfortable buffer with 70 FPS. For a 2016 FPS, this is a strong result; the game’s engine is well-optimized, and the RTX 4060 provides enough raw throughput for high-refresh-rate 1080p gaming and solid 1440p performance.
FAQ
*Q: Can this combo run Doom at 4K with Ultra settings?*
A: No. At 3840x2160 with Ultra settings, the average frame rate is 48 FPS, which is below the 60 FPS playability threshold. The best playable 4K setting is Medium, which averages 70 FPS.
Q: Is the CPU or GPU more important for this game?
A: The GPU is the primary constraint at all resolutions. The RTX 4060’s performance drops from 228 FPS at 1080p Low to 80 FPS at 4K Low, while the CPU’s 90th-percentile ranking indicates it has ample headroom. The Ultra 5 245 does not bottleneck at any tested setting.
Q: How does the RTX 4060 compare to its closest rivals in this game?
A: The RTX 4060’s average benchmark score of 17639 is within 0.7% of the AMD Radeon Pro 460 (17509), the AMD Radeon Pro 560 (17551), and the AMD Radeon 780M (17588). In Doom, these cards would produce nearly identical frame rates.
Q: What is the best setting for 1440p gaming with this combo?
A: Ultra settings at 2560x1440 produce an average of 89 FPS, which is well above 60 FPS. All four presets (Low, Medium, High, Ultra) are playable at 1440p, but Ultra gives the best visual quality without sacrificing smoothness.
Q: Does the 4K High preset miss the 60 FPS target?
A: Yes, by a narrow margin. At 3840x2160 with High settings, the average frame rate is 59 FPS — exactly one frame below the playable threshold. The Medium preset at 4K averages 70 FPS, providing a safer margin.
Q: How does this combo rank compared to other tested systems?
A: The combo ranks 2001 out of 3712 tested combinations for Doom, placing it slightly above the midpoint. The CPU is in the 90th percentile among all CPUs, while the GPU is in the 61st percentile among all GPUs, explaining the mid-pack game ranking.
Best Settings per Resolution
For each resolution, the most demanding preset that maintains an average frame rate at or above 60 FPS is as follows:
- 3840x2160 (4K): Medium settings, averaging 70 FPS. Low settings also work at 80 FPS, but Medium provides better visual quality while staying above the threshold.
- 2560x1440 (1440p): Ultra settings, averaging 89 FPS. This is the highest preset available, and it clears 60 FPS with a 29 FPS margin.
- 1920x1080 (1080p): Ultra settings, averaging 137 FPS. This is the maximum preset, delivering more than double the playability threshold.
These selections maximize graphical fidelity while ensuring no average frame rate dips below 60 FPS. At 4K, the jump from Medium (70 FPS) to High (59 FPS) crosses the threshold, so Medium is the optimal choice. At 1440p and 1080p, Ultra is both the best-looking and fully playable option.
Measured FPS Breakdown
The complete measured frame rate data for this combo in Doom is as follows:
3840x2160 (4K):
- Low: 80 FPS average
- Medium: 70 FPS average, with a minimum of 59 FPS and maximum of 80 FPS
- High: 59 FPS average
- Ultra: 48 FPS average
2560x1440 (1440p):
- Low: 147 FPS average
- Medium: 128 FPS average, with a minimum of 109 FPS and maximum of 148 FPS
- High: 108 FPS average
- Ultra: 89 FPS average
1920x1080 (1080p):
- Low: 228 FPS average
- Medium: 198 FPS average, with a minimum of 168 FPS and maximum of 228 FPS
- High: 167 FPS average
- Ultra: 137 FPS average
The min/max data is only provided for Medium settings at each resolution. At 4K Medium, the minimum of 59 FPS is exactly at the playability threshold, indicating occasional dips that could cause noticeable stutter on a 60 Hz display, though the average of 70 FPS provides a buffer. At 1440p and 1080p Medium, the minimums (109 FPS and 168 FPS respectively) are far above the threshold, showing consistent performance. The lack of min/max data for other presets means we can only rely on averages for those settings, but the high average values at 1080p and 1440p suggest smooth operation across the board.