Instant compatibility check with FPS benchmarks and optimization tips
Doom
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 51 | 63 | 74 | 85 |
| 1440p QHD | 95 | 116 | 137 | 157 |
| 1080p Full HD | 146 | 179 | 211 | 243 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Doom on Your System
The Intel Core Ultra 5 225 and NVIDIA GeForce RTX 5060 combination delivers a solid 60+ FPS experience across most of Doom's settings, with the only exception being 4K Ultra, where the average dips below the playable threshold. This pairing is well-balanced for a 2016 FPS title, showing strength at 1080p and 1440p while remaining respectable at 4K.
Measured FPS Breakdown
At 1920x1080, the combo produces extremely high frame rates. With Low settings, the average FPS reaches 243, with Medium averaging 211 FPS (min 180, max 243), High at 179 FPS, and Ultra at 146 FPS. These numbers indicate that the system is heavily GPU-limited at this resolution, as even the most demanding preset stays far above the 60 FPS playable threshold.
Moving to 2560x1440, performance remains strong but scales down noticeably. Low settings average 157 FPS, Medium drops to 137 FPS (min 116, max 157), High hits 116 FPS, and Ultra still manages 95 FPS. The gap between presets narrows compared to 1080p, suggesting the GPU is beginning to feel the resolution increase, though the CPU still has headroom.
At 3840x2160, the system starts to show its limits. Low settings average 85 FPS, Medium 74 FPS (min 63, max 85), High 63 FPS, and Ultra falls to 51 FPS. The 4K results show a clear pattern: the RTX 5060's 8 GB GDDR7 memory and 128-bit bus become the bottleneck, with frame rates dropping roughly 30-40% from 1440p to 4K across all presets.
The frame time data reveals consistency at lower resolutions. At 1080p Medium, the min FPS of 180 is only 31 frames below the max of 243, indicating smooth performance. At 1440p Medium, the spread is 116 to 157, a 41-frame gap. At 4K Medium, the spread tightens to 63 to 85, showing that the system is more consistent when pushed harder, though the average is lower.
CPU and GPU Roles
The data shows a clear division of labor between the Intel Core Ultra 5 225 and the RTX 5060. At 1080p, the CPU's 10 cores and 10 threads with a 4.90 GHz boost clock are sufficient to feed the GPU, as evidenced by the 243 FPS Low result. The scaling from Low to Ultra at 1080p shows only a 40% reduction (243 to 146 FPS), which is relatively modest and indicates the GPU is the primary limiter.
At 1440p, the GPU becomes more dominant. The difference between Low and Ultra is 157 to 95 FPS, a 39% drop, similar to the 1080p scaling. This suggests the CPU is still keeping pace, and the RTX 5060's 19.18 TFLOPS FP32 performance is the main factor. The 448.0 GB/s memory bandwidth is sufficient for this resolution, as frame rates remain above 90 FPS even at Ultra.
The 4K results reveal the GPU's limitations more starkly. The RTX 5060's 48 ROPs and 8 GB VRAM are stressed at 3840x2160, with Ultra dropping to 51 FPS. The CPU's role diminishes significantly at this resolution, as the GPU is clearly the bottleneck. The fact that Medium only reaches 74 FPS while High manages 63 FPS shows how quickly performance degrades as pixel count increases.
Comparing resolution scaling, the system loses about 35% performance going from 1080p to 1440p at the same preset, and another 40% from 1440p to 4K. This cascading drop is typical for a mid-range GPU paired with a capable CPU, confirming that the RTX 5060 is the limiting factor at higher resolutions.
Similar Performance Alternatives
The Intel Core Ultra 5 225 sits in a tight performance cluster. Its nearest rivals include the AMD Ryzen 5 5600F with a delta of 0%, the AMD Ryzen 5 5500X3D at -0.2%, the AMD Ryzen AI 7 PRO 450 at -0.4%, and the Intel Core i9-12900T at -0.5%. These CPUs would produce nearly identical frame rates in Doom, as the game is not heavily CPU-dependent at the tested settings.
For the GPU, the NVIDIA GeForce RTX 5060 has close competitors in the AMD Radeon 860M (-0.3%), NVIDIA GeForce MX550 (-0.3%), AMD Radeon RX 5700 XT 50th Anniversary (-0.8%), and AMD Radeon RX 6750 XT (+1.2%). The RX 6750 XT would be the closest match in performance, likely producing within 2% of the RTX 5060's frame rates across all resolutions.
A system with the Ryzen 5 5600F and RX 6750 XT would behave almost identically to this combo in Doom. The Ryzen 5 5500X3D, with its 3D V-Cache, might show slight advantages in CPU-bound scenarios, but Doom's engine is well-optimized and the differences would be negligible. The Intel Core i9-12900T, despite being a lower-power variant, would also keep up due to the game's modest CPU requirements.
The Verdict
This PC can absolutely run Doom. At 1920x1080, all four presets clear 60 FPS, with Ultra averaging 146 FPS and even the most demanding settings staying well above the playable threshold. At 2560x1440, the system maintains 60+ FPS on every preset, with Ultra at 95 FPS providing a smooth experience.
At 3840x2160, the situation changes. High, Medium, and Low all average above 60 FPS, but Ultra falls to 51 FPS, below the playable threshold. The verdict data confirms this, listing High, Low, and Medium as playable at 4K, with High being the best setting at 63 FPS average.
For a 2016 FPS title, this hardware is more than adequate. The RTX 5060's Blackwell architecture handles the Vulkan-based engine efficiently, and the Core Ultra 5 225 provides enough single-thread performance with its 4.90 GHz boost clock to avoid CPU bottlenecks. The only scenario where the system struggles is 4K Ultra, which is an extreme configuration for this game.
How This Combo Ranks
The Intel Core Ultra 5 225 + NVIDIA GeForce RTX 5060 combination ranks 1640 out of 3712 tested combos in Doom. This places it in the 44th percentile of all tested systems, meaning roughly 44% of configurations perform worse and 56% perform better. Given that the combo achieves playable frame rates at all resolutions except 4K Ultra, this ranking reflects the GPU's mid-range positioning rather than any deficiency in the pairing.
The rank is respectable considering the hardware class. The RTX 5060's percentile vs all GPUs is 72, indicating it outperforms 72% of GPUs in the database. The Core Ultra 5 225's percentile vs all CPUs is 85, showing strong CPU performance. The combo rank being lower than both individual percentiles suggests that Doom's engine is well-optimized and benefits more from GPU power than raw CPU capability.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 146 FPS. This provides the best visual quality while maintaining a massive margin above the playable threshold. The system could easily handle higher refresh rates, making this the recommended configuration.
At 2560x1440, Ultra is again the best choice, averaging 95 FPS. This gives players the full visual experience while staying comfortably above 60 FPS. The 95 FPS average leaves room for demanding scenes without dropping below the playable threshold.
At 3840x2160, the best settings is High, averaging 63 FPS. This is the highest preset that maintains 60+ FPS, but the margin is thin. Medium averages 74 FPS and Low 85 FPS, offering more headroom for players who prefer stability over visual fidelity. Ultra at 51 FPS should be avoided unless the player accepts sub-60 performance.