Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
446 FPS
Ultra 1080p Measured
292 FPS

1440p (2K / QHD)

Low 1440p Measured
314 FPS
Ultra 1440p Measured
189 FPS

4K (Ultra HD)

Low 4K Measured
170 FPS
Ultra 4K Measured
102 FPS
2.8ms Frame Time
4ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 49,394
Graphics Card
Required 27,325
Your GPU 77,712

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 102 125 148 170
1440p QHD 189 231 273 314
1080p Full HD 292 357 422 446

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 357
1920x1080 Low 446
1920x1080 Medium 422
1920x1080 Ultra 292
2560x1440 High 231
2560x1440 Low 314
2560x1440 Medium 273
2560x1440 Ultra 189
3840x2160 High 125
3840x2160 Low 170
3840x2160 Medium 148
3840x2160 Ultra 102

Performance Analysis: Doom on Your System

The Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 5090 D is an exceptionally high-end combination for running the 2016 release of Doom. The measured data places this combo at rank 22 out of 3712 tested combinations, placing it in the top percentile for this specific title. Across all three tested resolutions and all four settings presets, the system never falls below an average frame rate of 102 FPS, indicating a massive performance surplus for a game of this era. The data shows that this configuration is not merely playable; it delivers performance far beyond what the game's engine can stress at standard monitor refresh rates.

How This Combo Ranks

The combo rank of 22 out of 3712 tested combinations places this Intel Core i5-14600KF and NVIDIA GeForce RTX 5090 D pairing in the top 0.6% of all tested systems for Doom. This is a dominant position, reflecting the sheer computational headroom of both components when applied to this title. The CPU holds a percentile rank of 90 among all processors, while the GPU ranks at the 92nd percentile among all graphics cards, and their combined effort in this game yields a result that outpaces nearly all other hardware configurations in the database.

The CPU's average benchmark score of 49394 places it within a tight cluster of rivals, with the AMD Ryzen 9 7900 scoring 49228 (a 0.3% delta), the AMD Ryzen 7 PRO 5755G at 49196 (0.4% delta), and the Intel Core Ultra 5 245 at 48995 (0.8% delta). The only rival that edges ahead is the AMD Ryzen AI Max+ 388 with a score of 49796, representing a -0.8% delta from the i5-14600KF. This indicates that the processor's contribution to the combo's high rank is consistent with its direct peers, while the GPU's performance is the more distinguishing factor.

For the GPU, the RTX 5090 D's average benchmark score of 77712 is closely matched by the AMD Radeon RX 6650M XT at 76904 (1.1% delta), though the NVIDIA card pulls ahead of the AMD Radeon RX 6850M XT at 78940 (-1.6% delta) and the NVIDIA Tesla P100 variants. The Tesla P100 PCIe 12 GB scores 79396 (-2.1% delta) and the 16 GB version scores 79605 (-2.4% delta), meaning the RTX 5090 D trails those two compute-oriented cards in synthetic benchmarks, yet in Doom's real-world rasterization workload, this combo still achieves its top-22 rank. The combination of a 90th-percentile CPU and a 92nd-percentile GPU produces a system that sits comfortably at the apex of gaming performance for this title.

Best Settings per Resolution

The data reveals that this system can run Doom at the maximum "Ultra" settings preset at every resolution tested, with average frame rates that far exceed the 60 FPS playability threshold.

At 1920x1080, the Ultra preset delivers an average of 292 FPS, which is the best settings option available and still maintains a massive frame rate cushion. The Medium preset yields 422 FPS average, Low produces 446 FPS, and High sits at 357 FPS, but Ultra remains the recommended choice because it provides the highest visual fidelity without sacrificing playability.

Moving to 2560x1440, the Ultra preset again is the best choice, achieving an average of 189 FPS. The lower presets scale accordingly: High at 231 FPS, Medium at 273 FPS, and Low at 314 FPS. Even at this higher resolution, the frame rate at Ultra is more than triple the 60 FPS threshold, leaving no reason to reduce settings for performance reasons.

At 3840x2160 (4K), the Ultra preset maintains an average of 102 FPS, which clears the 60 FPS line by a wide margin. The other presets at this resolution are High at 125 FPS, Medium at 148 FPS, and Low at 170 FPS. Since Ultra remains comfortably above 60 FPS, the verdict for 4K is to use Ultra settings, as it is the most demanding preset that still stays at or above the playable threshold. The data shows no scenario where this combo needs to compromise on visual quality to achieve playable frame rates.

CPU and GPU Roles

The division of labor between the Intel Core i5-14600KF and the NVIDIA GeForce RTX 5090 D becomes clear when examining how frame rates scale with resolution and settings changes. At 1920x1080, the difference between Low and Ultra settings is substantial: Low averages 446 FPS while Ultra averages 292 FPS, a drop of 154 FPS or about 34.5% when moving to the highest preset. This indicates that at lower resolutions, the GPU is being pushed harder as settings increase, but the CPU has enough headroom to keep feeding frames at these very high rates.

When resolution increases to 2560x1440, the frame rates at each settings level decrease proportionally. Low drops from 446 FPS to 314 FPS, and Ultra drops from 292 FPS to 189 FPS. The scaling from 1080p to 1440p at Ultra settings is a reduction of 103 FPS (about 35.3%), which suggests the GPU is becoming more of a limiting factor as pixel count rises, but the CPU still maintains sufficient throughput to avoid bottlenecking.

At 3840x2160, the trend continues. Low settings yield 170 FPS, and Ultra yields 102 FPS at 4K. The drop from 1440p Ultra (189 FPS) to 4K Ultra (102 FPS) is 87 FPS, a 46% reduction. This larger percentage drop at 4K indicates that the GPU is now the dominant constraint, as the render resolution quadruples the pixel count from 1080p. The CPU's role is to maintain high enough frame rates to feed the GPU, and the data shows it does so effectively, but the RTX 5090 D's workload scales heavily with resolution.

Comparing settings within a single resolution further clarifies the GPU's load. At 4K, the spread between Low (170 FPS) and Ultra (102 FPS) is 68 FPS, while at 1080p that same spread is 154 FPS. The absolute difference shrinks at higher resolutions because the GPU is already saturated with pixel work, leaving less room for settings to influence the frame rate. The CPU's performance, meanwhile, is consistent across resolutions—its 14 cores and 20 threads with a boost clock of 5.30 GHz are more than sufficient for a 2016 game, meaning the processor never becomes the primary bottleneck in any tested configuration.

Similar Performance Alternatives

For the CPU, the nearest rivals in synthetic benchmark scores are all AMD or Intel parts that would behave similarly in Doom. The AMD Ryzen 9 7900 has an average score of 49228, which is 0.3% lower than the i5-14600KF, indicating near-identical processing power for this workload. The AMD Ryzen 7 PRO 5755G scores 49196 (0.4% lower), and the Intel Core Ultra 5 245 scores 48995 (0.8% lower), all within a negligible performance band. The AMD Ryzen AI Max+ 388 scores 49796, which is 0.8% higher, meaning it would offer a marginal improvement in CPU-bound scenarios, though in Doom's GPU-heavy rendering, this difference is unlikely to translate into measurable frame rate gains.

On the GPU side, the RTX 5090 D's nearest rivals present an interesting picture. The AMD Radeon RX 6650M XT scores 76904 (1.1% lower), so a system with that mobile GPU would produce nearly identical frame rates in Doom, despite it being a different class of hardware. The AMD Radeon RX 6850M XT scores 78940 (1.6% higher), suggesting it would deliver slightly better performance. The NVIDIA Tesla P100 PCIe 12 GB and 16 GB variants score 79396 and 79605 respectively (2.1% and 2.4% higher), but these are compute-focused cards without consumer graphics drivers, so their real-world gaming performance would be limited. For practical purposes, the RX 6850M XT is the closest consumer alternative that would outperform the RTX 5090 D in this title, while the RX 6650M XT would be virtually indistinguishable in frame rates.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across all settings and resolutions. At 1920x1080, the Low preset achieves an average of 446 FPS, with no minimum or maximum recorded. Medium settings produce an average of 422 FPS, with a minimum of 359 FPS and a maximum of 486 FPS, showing a tight range that indicates stable performance. High settings yield 357 FPS average, and Ultra drops to 292 FPS average. The 1080p results show that even the most demanding preset remains above 290 FPS, which is far beyond any display's refresh rate capability.

At 2560x1440, the frame rates scale down predictably. Low settings average 314 FPS, Medium averages 273 FPS with a minimum of 232 FPS and maximum of 314 FPS, High averages 231 FPS, and Ultra averages 189 FPS. The Medium preset's minimum of 232 FPS is still well above the 60 FPS threshold, and the consistency between the average and maximum values suggests no significant frame pacing issues.

The 3840x2160 results are the most demanding. Low settings average 170 FPS, Medium averages 148 FPS with a minimum of 126 FPS and maximum of 170 FPS, High averages 125 FPS, and Ultra averages 102 FPS. The minimum recorded at 4K Medium is 126 FPS, which is still double the playable threshold. The data shows that even at 4K with the highest settings, the system never drops below 102 FPS on average, and the only recorded minimums (at Medium settings) stay above 126 FPS. This indicates that the RTX 5090 D's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are more than sufficient for Doom's texture loads, and the GPU's 21760 shading units handle the rendering load without dipping into lower frame rate territory.

The Verdict

This PC can absolutely run Doom at playable frame rates, and the verdict is clear across all resolutions. At 1920x1080, the Ultra settings produce an average of 292 FPS, which is nearly five times the 60 FPS playable threshold. At 2560x1440, Ultra averages 189 FPS, still more than triple the threshold. At 3840x2160, Ultra averages 102 FPS, which comfortably clears the 60 FPS line. The verdictByResolution data lists all four settings presets (Low, Medium, High, Ultra) as playable at every resolution, meaning there is no configuration where this combo fails to meet the playability standard.

The best settings at each resolution are consistently Ultra. At 4K, the 102 FPS average at Ultra is the lowest performance point in the entire dataset, yet it still exceeds the 60 FPS requirement by 42 FPS. For users with high-refresh-rate displays, the 1080p and 1440p results offer frame rates in the 189-292 FPS range at Ultra, which would fully utilize a 144Hz or 240Hz monitor. The data shows that this system is overkill for Doom, but that overkill ensures flawless performance without any need to lower graphical fidelity.

FAQ

Q: What is the highest settings preset that maintains 60 FPS at 4K resolution?

A: The Ultra preset at 3840x2160 achieves an average of 102 FPS, which is above the 60 FPS threshold. All settings presets (Low, Medium, High, Ultra) are listed as playable at 4K, with Ultra being the best choice.

Q: How does the CPU compare to its nearest rivals for this game?

A: The Intel Core i5-14600KF has an average benchmark score of 49394. The AMD Ryzen 9 7900 scores 49228 (0.3% lower), the AMD Ryzen 7 PRO 5755G scores 49196 (0.4% lower), and the Intel Core Ultra 5 245 scores 48995 (0.8% lower). The AMD Ryzen AI Max+ 388 scores 49796, which is 0.8% higher.

Q: What frame rate does the system achieve at 1440p with Ultra settings?

A: At 2560x1440 with Ultra settings, the average frame rate is 189 FPS. The Medium preset at this resolution averages 273 FPS, with a recorded minimum of 232 FPS and maximum of 314 FPS.

Q: Is the GPU or CPU more important for performance at 4K?

A: The data shows that frame rates drop more significantly from 1440p to 4K (189 FPS to 102 FPS at Ultra) than from 1080p to 1440p (292 FPS to 189 FPS), indicating the GPU becomes the dominant factor at higher resolutions. The CPU maintains sufficient performance across all resolutions.

Q: What are the minimum recorded frame rates for this combo?

A: The only minimums recorded are at Medium settings: 359 FPS at 1080p, 232 FPS at 1440p, and 126 FPS at 4K. No minimums were recorded for Low, High, or Ultra presets, but the averages for those presets remain well above 60 FPS.

Q: How does this combo rank compared to all other tested systems for Doom?

A: It ranks 22nd out of 3712 tested combinations, placing it in the top 0.6% of all systems. The GPU holds a 92nd percentile rank among all graphics cards, and the CPU holds a 90th percentile rank among all processors.