Instant compatibility check with FPS benchmarks and optimization tips
Doom
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 102 | 125 | 148 | 170 |
| 1440p QHD | 189 | 231 | 273 | 314 |
| 1080p Full HD | 292 | 357 | 422 | 447 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Doom on Your System
The Intel Core i5-14600K paired with the NVIDIA GeForce RTX 5090 D delivers exceptional performance in Doom, with benchmark results showing every preset tested at every resolution far exceeding the 60 FPS playability threshold. The data indicates this combination is operating at the very high end of the performance spectrum, with measured average frame rates ranging from a low of 102 FPS at 4K Ultra to a high of 447 FPS at 1080p Low.
Best Settings per Resolution
At 3840x2160, the most demanding preset that maintains an average frame rate at or above 60 FPS is Ultra, which produces an average of 102 FPS. This is the maximum visual quality option available in the measured data, and it still leaves a substantial margin above the playability threshold.
For 2560x1440, the Ultra preset again represents the best settings, achieving an average of 189 FPS. The performance headroom at this resolution is considerable, as even this highest quality setting delivers more than triple the required 60 FPS baseline.
At 1920x1080, the Ultra preset yields an average of 292 FPS, making it the clear choice for maximum visual fidelity without any concern for frame rate stability. The data suggests that at this resolution, the GPU has significant spare capacity, as even the most demanding setting produces a frame rate that is nearly five times the minimum playability standard.
Across all resolutions, the Ultra preset is the recommended choice, as the measured minimum frame rates at Medium settings are already well above 60 FPS. The only recorded minimum frame rate data points are for Medium settings: 126 FPS at 4K, 232 FPS at 1440p, and 359 FPS at 1080p. These figures confirm that even the worst-case frame times at lower settings are far above the playability threshold, so pushing to Ultra is always the optimal choice for this hardware combination.
CPU and GPU Roles
The benchmark data shows a clear pattern of GPU scaling across resolutions, while the CPU remains a relatively constant factor. Moving from 1920x1080 to 2560x1440, the average frame rate at Ultra settings drops from 292 FPS to 189 FPS, a decrease of approximately 35%. The further transition to 3840x2160 reduces the Ultra average to 102 FPS, another drop of roughly 46% from the 1440p figure. This consistent scaling with pixel count indicates that the GPU is the primary limiter at higher resolutions.
The CPU role is most visible at 1080p, where the frame rates are exceptionally high. At 1920x1080 Low settings, the combo reaches 447 FPS, and at Medium settings it achieves 422 FPS. The relatively small difference between Low and Medium at 1080p, a gap of just 25 FPS, suggests that the CPU is beginning to constrain the frame rate at these extremely high output levels. In contrast, at 4K, the difference between Low and Medium is 22 FPS, similar in absolute terms, but the lower overall frame rates indicate the GPU is the dominant factor.
The scaling between presets also illustrates this balance. At 4K, the frame rate ranges from 170 FPS at Low to 102 FPS at Ultra, a drop of 40% from the lowest to the highest quality setting. At 1080p, the range is from 447 FPS at Low to 292 FPS at Ultra, a drop of nearly 35%. This shows that the GPU workload increases proportionally with both resolution and quality settings, while the CPU's influence remains relatively constant, allowing the GPU to take over as the primary bottleneck at 4K.
FAQ
Q: Can the system achieve 60 FPS at 4K with maximum settings?
A: Yes, the measured average frame rate at 3840x2160 Ultra is 102 FPS, which is well above the 60 FPS playable threshold.
Q: What is the highest frame rate recorded for this combination?
A: The maximum average frame rate is 447 FPS at 1920x1080 with Low settings, while the maximum frame time recorded is 486 FPS at 1080p Medium.
Q: How much performance is lost when moving from 1440p to 4K?
A: At Ultra settings, the average frame rate drops from 189 FPS at 2560x1440 to 102 FPS at 3840x2160, a reduction of 87 FPS or about 46%.
Q: Are there any settings that produce a frame rate below 60 FPS?
A: No. Every measured combination of resolution and settings yields an average frame rate well above 60 FPS, with the lowest reading being 102 FPS at 4K Ultra.
Q: What is the difference in performance between Low and Ultra settings at 1080p?
A: At 1920x1080, the average frame rate is 447 FPS at Low and 292 FPS at Ultra, a difference of 155 FPS.
Q: Does the GPU always outperform the CPU in this game?
A: The data shows the GPU is the primary bottleneck at 4K, but at 1080p the frame rates are so high that the CPU likely becomes a limiting factor, as indicated by the relatively small gap between Low and Medium settings results.
Similar Performance Alternatives
Based on aggregate benchmark scores, the Intel Core i5-14600K is closely matched by several other processors, all within a narrow range of the same score. The Intel Xeon Gold 5318H has an average score of 48698, which is 0.2% below the i5-14600K's score of 48618. That is, the Xeon is essentially equal in performance. The AMD EPYC 4345P scores 48470, a 0.3% difference, while the Intel Core Ultra 5 245HX scores 48287, which is 0.7% lower. The Intel Core Ultra 5 245 scores 48995, which is 0.8% higher than the i5-14600K. In terms of raw compute capability, all four of these alternatives would deliver nearly identical performance in Doom, with the difference being not more than a few depending on the exact workload.
For the GPU, the NVIDIA GeForce RTX 5090 D is positioned close to a set of diverse alternatives. The AMD Radeon RX 6650M XT has an average score of 76904, which is 1.1% lower than the RTX 5090 D's score of 77712. The AMD Radeon RX 6850M XT scores 78940, which is 1.6% higher, while the NVIDIA Tesla P100 PCIe 12 GB scores 79396, which is 2.1% higher. The Tesla P100 PCIe 16 GB scores 79605, which is 2.4% higher. These deltaPct values indicate that any of these GPUs would produce broadly similar frame rates in Doom, with the actual in-game difference probably being less than the mark’s performance gap would suggest, given that the game is not overly demanding for modern hardware.
How This Combo Ranks
The combination of the Intel Core i5-14600K and the NVIDIA GeForce RTX 5090 D ranks 21st out of 3712 tested combos for Doom, placing it in the top 1% of all configurations. This rank reflects the extremely high measured frame rates across all resolutions. The combination of a high-end CPU and flagship-tier GPU ensures that the system is not limited by either component in any measurable setting, achieving performance that nearly exceeds the ability of a 60 Hz or even a 144 Hz monitor to display. The rank of 21 means there are only 20 other combinations that perform better, likely consisting of even more powerful CPUs that can push higher frame rates at 1080p, or possibly more specialized hardware. The data shows this system is well positioned to handle the game with substantial headroom.
The Verdict
The data confirms that this system can run Doom at all tested resolutions and settings. At 3840x2160, the best playable setting is Ultra, with an average frame rate of 102 FPS. At 2560x1440, the best setting is also Ultra, averaging 189 FPS. At 1920x1080, the Ultra preset achieves an average of 292 FPS. All four settings at all three resolutions are listed as playable, meaning every combination exceeds the 60 FPS threshold. The lowest frame rate measured is 102 FPS at 4K Ultra, which is still 70% higher than the threshold. In practical terms, this system will deliver a smooth experience at any resolution on any settings, with the only limitation being the refresh rate of the display.
Measured FPS Breakdown
The following is the complete measured data for all tested configurations.
At 3840x2160 resolution, the average FPS is as follows. Low settings produce 170 FPS. Medium settings produce 148 FPS, with a minimum of 126 and a maximum of 170. High settings produce 125 FPS. Ultra settings produce 102 FPS. The min and max values are only recorded for Medium settings, but the averages show a clear scaling pattern.
At 2560x1440 resolution, Low settings average 314 FPS. Medium settings average 273 FPS, with a minimum of 232 and a maximum of 314. High settings average 231 FPS. Ultra settings average 189 FPS. The frame rates at this resolution are consistently higher than at 4K, showing the expected scaling.
At 1920x1080 resolution, Low settings average 447 FPS. Medium settings average 422 FPS, with a minimum of 359 and a maximum of 486. High settings average 357 FPS. Ultra settings average 292 FPS. The minimum FPS at 1080p Medium is 359, which is still more than five times the playable threshold.
The data set does not include minimum or maximum FPS values for the Low, High, and Ultra settings, only the average. The Medium setting is the only one with complete min/avg/max data, likely because it represents the most balanced test point. The measured data is marked as true and reliable, providing a solid basis for the analysis above.