Instant compatibility check with FPS benchmarks and optimization tips
Doom
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 102 | 125 | 148 | 170 |
| 1440p QHD | 189 | 231 | 273 | 314 |
| 1080p Full HD | 292 | 357 | 391 | 410 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Doom on Your System
The Intel Core i5-12600KF paired with the NVIDIA GeForce RTX 5090 D delivers extreme performance in Doom, a 2016 FPS that remains highly demanding at high refresh rates. The measured data shows this combo ranks 30th out of 3,712 tested configurations, placing it in the top 1% of all systems. Across all three resolutions tested, the combination clears the 60 FPS playability threshold with enormous headroom, making it suitable for high-refresh-rate monitors.
Best Settings per Resolution
At 3840x2160, the most demanding preset that maintains 60 FPS or higher is Ultra, which averages 102 FPS. The data shows that even at this maximum quality setting, the system does not approach the playability floor. For reference, High averages 125 FPS, Medium 148 FPS, and Low 170 FPS at this 4K resolution.
At 2560x1440, Ultra again is the best playable setting, with an average of 189 FPS. Every preset here is far above the 60 FPS threshold, with High at 231 FPS, Medium at 273 FPS, and Low at 314 FPS. The scaling from 4K to 1440p shows roughly an 85% performance increase at Ultra settings.
At 1920x1080, Ultra averages 292 FPS, making it the definitive choice for the most demanding visual quality. High produces 357 FPS, Medium 391 FPS, and Low 410 FPS. At no point does this combination struggle to deliver a smooth experience; the bottleneck at 1080p shifts to the CPU side, as evidenced by the relatively smaller gains from Low to Ultra compared to 4K.
How This Combo Ranks
The comboRankInGame of 30 out of 3,712 combinations puts this system in the 99.2nd percentile of all tested hardware pairings. This rank indicates that the i5-12600KF plus RTX 5090 D is an exceptionally fast pairing for Doom, with the GPU being the primary driver of the high ranking due to its 92nd percentile score among all GPUs.
The CPU's percentileVsAllCpus of 79% shows that the i5-12600KF is solid but not top-tier in synthetic benchmarks, yet the combination still achieves a top 1% rank in this game. This disparity reveals that Doom's engine benefits heavily from GPU raw compute power, particularly the 104.8 TFLOPS of FP32 performance from the RTX 5090 D. The rank also suggests that the game is not heavily CPU-limited at most resolutions, as the 10-core, 16-thread processor provides sufficient throughput.
At 1080p resolution, the rank might be slightly lower than expected due to CPU overhead, but the data shows the combo still holds a strong position. The 3,712 combinations tested include a wide variety of hardware, and being in the top 30 indicates that only a handful of configurations (likely featuring faster CPUs like the Ryzen 7 5800X3D) can outperform this setup.
Measured FPS Breakdown
3840x2160 (4K): The data provides complete measurements for Medium only. At Medium settings, the average FPS is 148, with a minimum of 126 FPS and a maximum of 170 FPS. This spread of 44 FPS indicates some scene-to-scene variability but no severe dips below playable levels. For High, Ultra, and Low, the pack lists only average FPS: 125, 102, and 170 respectively. The progression is logical: Ultra is roughly 18% slower than High, while Low is 36% faster than Ultra.
2560x1440 (1440p): Medium settings again have the only full min/max data: average 273 FPS, minimum 232 FPS, maximum 314 FPS. The minimum FPS here shows that even in the most demanding scenes, the frame rate stays above 230 FPS, which is well beyond typical 144Hz or 165Hz monitor refresh rates. Average FPS for High, Low, and Ultra are 231, 314, and 189 respectively. The delta between Low and Ultra is 125 FPS, showing the heavy cost of maxing out settings at this resolution.
1920x1080 (1080p): Medium shows an average of 391 FPS, with a minimum of 332 and a maximum of 449. The narrow range (from min to max) is 117 FPS, but the lowest frame still exceeds 300 FPS. High averages 357 FPS, Low 410 FPS, and Ultra 292 FPS. At 1080p, the GPU is so fast that the CPU becomes the limiting factor; the difference between Low and Medium is only 19 FPS, while the gap from Medium to High is 34 FPS.
The scaling across resolutions is telltale: at 4K Ultra the average is 102 FPS, at 1440p Ultra it's 189 FPS (an 85% jump), and at 1080p Ultra it's 292 FPS (a 54% jump from 1440p). This non-linear scaling shows that the GPU is less the bottleneck at lower resolutions, where the CPU's single-thread performance (3,302 in Cinebench R23 single-core) becomes more relevant.
Similar Performance Alternatives
Looking at the nearestRivals for the CPU, the Intel Core i5-12600KF's average benchmark score of 27,799 is nearly identical to the Intel Core i9-10900K (27,872, delta -0.3%), the AMD Ryzen 5 8500GE (27,712, delta +0.3%), the AMD Ryzen 7 6800U (27,887, delta -0.3%), and the AMD Ryzen 7 5800X3D (27,896, delta -0.3%). For Doom, the 5800X3D is particularly relevant because its 3D V-Cache can help in certain game engine workloads, but the delta is so small that in practice you would see identical frame rates with the i5-12600KF.
For the GPU, the RTX 5090 D's average score of 77,712 is within a few percent of the AMD Radeon RX 6650M XT (76,904, delta +1.1%), the AMD Radeon RX 6850M XT (78,940, delta -1.6%), and the NVIDIA Tesla P100 variants (79,396 and 79,605, deltas -2.1% and -2.4%). These are borderline rivals in synthetic benchmarks, but the RTX 5090 D's actual game performance might differ due to driver optimizations and architecture. The RX 6850M XT, being a mobile GPU, might not sustain the same frame rates in a desktop context, but the raw compute score is close.
If a user were to swap the i5-12600KF for the Ryzen 7 5800X3D, the game would likely perform the same or slightly better in CPU-bound scenes at 1080p. Conversely, replacing the RTX 5090 D with the RX 6850M XT would drop performance by roughly 1-2% based on synthetic scores, which translates to a few FPS in Doom. The Tesla P100 variants are compute-oriented and lack the gaming drivers, so they are not practical alternatives, but their proximity in score shows the RTX 5090 D is in a unique performance tier.
FAQ
Q: Can this PC run Doom at 4K Ultra settings above 60 FPS?
A: Yes. Measured data shows an average of 102 FPS at 3840x2160 with Ultra settings, which is 70% above the 60 FPS playable threshold.
Q: What is the best preset at 2560x1440 for maximum quality?
A: Ultra settings are the best option, delivering an average of 189 FPS. All four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold at this resolution.
Q: How does the i5-12600KF compare to the Ryzen 7 5800X3D for this game?
A: The two CPUs have nearly identical average benchmark scores: the i5-12600KF scores 27,799, while the Ryzen 7 5800X3D scores 27,896, a delta of -0.3%. In Doom, the performance difference would be negligible.
Q: Is the RTX 5090 D overkill for 1080p gaming?
A: The data shows an average of 292 FPS at 1080p Ultra, which is about 4.9x the 60 FPS threshold. This suggests the GPU is severely underutilized at this resolution, and the CPU becomes the limiting factor.
Q: Why are there no minimum FPS values for most settings?
A: The FACT PACK provides minimum and maximum FPS only for Medium settings at each resolution. For 4K Medium, the min is 126 FPS; for 1440p Medium, it's 232 FPS; and for 1080p Medium, it's 332 FPS. Other settings only have average values.
Q: What is the combo's rank out of all tested configurations?
A: The combination ranks 30th out of 3,712 tested combos, placing it in the top 1% of all systems tested for Doom.
The Verdict
This PC can definitively run Doom at any resolution and preset. The verdictByResolution data shows that all four settings (Low, Medium, High, Ultra) are playable at every resolution, with the best settings being Ultra everywhere. At 3840x2160, Ultra averages 102 FPS, which is 42 FPS above the 60 FPS threshold. At 2560x1440, Ultra averages 189 FPS, more than triple the threshold. At 1920x1080, Ultra averages 292 FPS, which is nearly five times the threshold.
There is no scenario in the measured data where this combination dips below 60 FPS. The worst-case frame rate shown is the minimum FPS at 4K Medium (126 FPS), which is still twice the playable threshold. The system is capable of driving high-refresh-rate displays (144Hz, 165Hz, 240Hz) at 1440p and 1080p, and even at 4K, the average FPS is above 100 for all settings.
The only caveat is that the game's engine is from 2016, so it may not utilize the RTX 5090 D's full feature set, but the raw compute power (104.8 TFLOPS FP32) ensures massive headroom. For a 60 FPS lock, the user could max out everything at 4K and never notice a drop.
CPU and GPU Roles
The data reveals a clear division of labor between the i5-12600KF and the RTX 5090 D across resolutions. At 3840x2160, the GPU is the dominant bottleneck. The scaling from Low (170 FPS) to Ultra (102 FPS) shows a 40% FPS drop, which is consistent with a GPU-bound scenario. The CPU's 16 threads are sufficient to feed the GPU at 4K, as evidenced by the high frame rates.
At 2560x1440, the GPU is still the primary limiter, but the CPU starts to show its influence. The gap between Medium (273 FPS) and Low (314 FPS) is 41 FPS, while the gap from Medium to Ultra (189 FPS) is 84 FPS. This asymmetry suggests that the GPU is being pushed harder at Ultra, but the CPU can still keep up.
At 1920x1080, the CPU's role becomes more pronounced. The difference between Low (410 FPS) and Medium (391 FPS) is only 19 FPS, and the jump from Medium to High (357 FPS) is 34 FPS, while High to Ultra (292 FPS) is 65 FPS. The frame rate ceiling at low settings (410 FPS) appears to be near the CPU's limit, as the GPU could likely render more frames if the processor could issue draw calls faster. The i5-12600KF's single-thread score of 3,302 in Cinebench R23 is high, but it is not the fastest, which matches the 79th percentile ranking.
The dual-core scaling also shows this: 3DMark scores of 1,995 for 2 threads and 7,956 for 16 threads indicate that the CPU scales well with multi-threading, but Doom's engine may not use all 16 threads effectively, leading to a single-thread bottleneck at low resolutions. The GPU's role is to deliver raw frame rates, while the CPU's role is to feed the GPU at lower resolutions—this combination does both well, but the CPU is the weaker link at 1080p, capping the system from reaching the GPU's maximum potential.