Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

51%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
193 FPS
Ultra 1080p Measured
116 FPS

1440p (2K / QHD)

Low 1440p Measured
125 FPS
Ultra 1440p Measured
75 FPS

4K (Ultra HD)

Low 4K Measured
68 FPS
Ultra 4K Measured
41 FPS
7ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 19,039
Graphics Card
Required 27,325
Your GPU 15,171

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 41 50 59 68
1440p QHD 75 92 109 125
1080p Full HD 116 142 168 193

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 142
1920x1080 Low 193
1920x1080 Medium 168
1920x1080 Ultra 116
2560x1440 High 92
2560x1440 Low 125
2560x1440 Medium 109
2560x1440 Ultra 75
3840x2160 High 50
3840x2160 Low 68
3840x2160 Medium 59
3840x2160 Ultra 41

Performance Analysis: Doom on Your System

The Intel Core i5-12400F paired with the AMD Radeon RX 7600 delivers a decisive performance profile for Doom, with the data showing playable frame rates across nearly the entire settings range at every common resolution. The measured results indicate that this combination is heavily GPU-bound at higher presets, while the CPU’s strong multi-threaded throughput ensures the system scales cleanly from 1080p to 1440p without bottlenecking. At 4K, the GPU’s 8 GB memory and RDNA 3.0 architecture become the limiting factors, but the system still clears the 60 FPS threshold on Low settings. The following breakdown examines each resolution’s measured FPS, answers key questions from the data, and provides a definitive verdict on playability.

Measured FPS Breakdown

The measured FPS data for this configuration covers three resolutions and four quality presets, with full average values for every combination and min/max frames recorded only for the Medium preset at each resolution.

At 1920x1080, the combination performs exceptionally well across all settings. The Low preset delivers an average of 193 FPS, which serves as the ceiling for this resolution. Medium averages 168 FPS, with the measured range spanning from 143 FPS minimum to 193 FPS maximum. High settings produce an average of 142 FPS, while Ultra maintains a robust 116 FPS average. The gap between Low and Ultra is 77 FPS, indicating that the GPU has ample headroom even at the most demanding preset. The min/max data at Medium shows a 50 FPS spread, suggesting the frame pacing remains consistent under load.

Moving to 2560x1440, the average FPS figures show a predictable decline but remain well above playability thresholds. Low settings average 125 FPS, while Medium produces 109 FPS with a measured range of 92 FPS minimum to 125 FPS maximum. High settings average 92 FPS, and Ultra still maintains a comfortable 75 FPS average. The scaling from 1080p to 1440p is nearly linear: at Ultra, the drop from 116 FPS to 75 FPS represents a 35.3% reduction, which aligns with the increased pixel count. The Medium preset’s min/max spread of 33 FPS is narrower than at 1080p, indicating steadier performance at this resolution.

At 3840x2160, the GPU begins to show its limits. Low settings average 68 FPS, just above the 60 FPS playability threshold. Medium averages 59 FPS, with a measured range of 50 FPS minimum to 68 FPS maximum, placing it technically below the threshold on average. High settings drop to 50 FPS average, and Ultra falls to 41 FPS. The scaling from 1440p to 4K is steep: Ultra drops from 75 FPS to 41 FPS, a 45.3% reduction, while Low drops from 125 FPS to 68 FPS, a 45.6% reduction. This consistent percentage drop across presets confirms that the RX 7600’s 288.0 GB/s memory bandwidth is the primary constraint at 4K.

The Medium preset’s min/max data provides additional insight. At 1080p, the 143 FPS minimum still far exceeds the 60 FPS threshold, while at 1440p the 92 FPS minimum remains comfortable. At 4K, the 50 FPS minimum falls below the threshold, meaning even brief dips during intense combat sequences would be noticeable. The absence of min/max data for other presets suggests the benchmark suite only recorded these for Medium, but the averages alone are sufficient to characterize performance.

FAQ

Q: Can this system run Doom at 4K with playable frame rates?

A: Yes, but only on Low settings, where the average FPS is 68. Medium drops to 59 FPS average, High falls to 50 FPS, and Ultra bottoms out at 41 FPS. The verdict data confirms Low is the only playable setting at 3840x2160.

Q: What is the best preset at 1440p for this combination?

A: Ultra settings, which average 75 FPS. This is comfortably above the 60 FPS threshold, and the verdict lists all four presets (Low, Medium, High, Ultra) as playable at this resolution.

Q: How does the CPU’s benchmark score compare to its nearest rivals?

A: The Core i5-12400F has an average benchmark score of 19039, which is virtually identical to the AMD Ryzen 5 7535HS at 19047 (0% delta) and the Intel Core 3 201E at 19056 (-0.1% delta). It sits slightly above the Intel Core i5-1335U at 18982 (0.3% delta) and the AMD EPYC 7773X at 18979 (0.3% delta).

Q: What is the GPU’s percentile ranking among all tested graphics cards?

A: The Radeon RX 7600 ranks in the 57th percentile of all GPUs, with an average benchmark score of 15171. Its closest rival is the NVIDIA GeForce RTX 3050 OEM at 15199 (-0.2% delta), demonstrating nearly identical synthetic performance.

Q: Is there a significant FPS drop between 1080p and 1440p at High settings?

A: Yes. At 1920x1080 High, the average is 142 FPS, while at 2560x1440 High, it drops to 92 FPS. That is a 50 FPS reduction, or a 35.2% decline, which is proportional to the resolution’s pixel increase.

Q: Does the system maintain 60 FPS at 4K Medium?

A: No. The average is 59 FPS, which is just below the 60 FPS playability threshold. The measured minimum at this setting is 50 FPS, so sustained action sequences would likely produce noticeable frame drops.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 116 FPS. This gives the user maximum visual quality with a substantial 56 FPS margin above the threshold.

At 2560x1440, Ultra is again the best choice, averaging 75 FPS. This provides a 15 FPS buffer above the 60 FPS threshold, making it a safe option for consistent performance.

At 3840x2160, the only preset that clears 60 FPS is Low, averaging 68 FPS. Medium falls to 59 FPS, so Low is the sole playable option at 4K, leaving an 8 FPS margin above the threshold.

The Verdict

This PC can run Doom, and it does so with strong performance at 1080p and 1440p. The verdict data confirms that at 1920x1080, all four presets—Low, Medium, High, and Ultra—are playable, with Ultra averaging 116 FPS. At 2560x1440, the same four presets are playable, with Ultra averaging 75 FPS. At 3840x2160, only Low is playable, averaging 68 FPS, while Medium (59 FPS), High (50 FPS), and Ultra (41 FPS) all fall below the 60 FPS threshold.

The system’s performance is sufficient for high-refresh-rate gaming at 1080p, as even Ultra delivers more than double the 60 FPS threshold. At 1440p, the user can still enable maximum settings without concern. The 4K experience is limited to Low settings, which undermines the visual fidelity that 4K resolution is meant to provide. For users targeting 4K, the data suggests this combination is better suited to Medium or High at 1440p rather than sacrificing quality at 4K.

The measured data indicates that the RX 7600’s 8 GB memory and 128-bit bus are the limiting factors at 4K, while the i5-12400F’s six cores and 12 threads provide ample processing power. The CPU’s 73rd percentile ranking among all processors confirms it is not a bottleneck in this configuration.

Similar Performance Alternatives

The nearest rivals for the Intel Core i5-12400F, based on average benchmark scores, include the AMD Ryzen 5 7535HS (19047 score, 0% delta), the Intel Core 3 201E (19056, -0.1% delta), the Intel Core i5-1335U (18982, 0.3% delta), and the AMD EPYC 7773X (18979, 0.3% delta). These processors would deliver nearly identical CPU-bound performance in Doom, meaning the measured FPS at lower resolutions and presets would be essentially unchanged.

For the AMD Radeon RX 7600, the nearest GPU rivals are the NVIDIA GeForce RTX 3050 OEM (15199 score, -0.2% delta), the AMD Radeon Pro 560X (15082, 0.6% delta), the AMD Radeon 680M (15270, -0.7% delta), and the NVIDIA GeForce GTX 660 Ti (15063, 0.7% delta). Swapping in any of these GPUs would result in comparable frame rates at all resolutions, though the RTX 3050 OEM’s similar score suggests it would match the RX 7600 within a 1% margin. The Radeon 680M’s integrated nature would also perform similarly, though it would rely on system memory rather than dedicated VRAM.

How This Combo Ranks

This specific combination of the Intel Core i5-12400F and AMD Radeon RX 7600 ranks 2540 out of 3712 tested combos in the benchmark database. This places it in the 68.5th percentile of all tested systems, meaning it outperforms roughly two-thirds of configurations tested with Doom. The rank reflects a balance between the CPU’s strong multi-threaded scores (e.g., 12380 in Cinebench R23 multicore) and the GPU’s mid-range standing (57th percentile among all GPUs).

The ranking indicates that while this is not a top-tier configuration, it sits comfortably in the upper half of tested systems. The gap between the combo’s rank and the GPU’s individual percentile (57th) suggests that the CPU’s performance boosts the overall system slightly, particularly in CPU-intensive scenes. Conversely, the GPU’s 4K limitations prevent the combo from ranking higher, as systems with more powerful GPUs would achieve playable 4K High or Ultra settings.

CPU and GPU Roles

The data reveals a clear division of labor between the CPU and GPU across resolutions. At 1920x1080, the i5-12400F’s single-thread performance (3481 in Passmark single-thread) and multi-thread capability (19433 in Passmark multithread) allow the RX 7600 to operate near its maximum output. The 77 FPS difference between Low (193 FPS) and Ultra (116 FPS) at 1080p demonstrates that the GPU is the primary driver of performance scaling, as the CPU has ample headroom to feed the GPU at all presets.

At 2560x1440, the GPU’s role becomes more pronounced. The average FPS at Ultra drops to 75, a 35.3% reduction from 1080p Ultra, which directly correlates with the 1.78x increase in pixel count. The CPU’s contribution remains consistent, as the 125 FPS at Low settings still exceeds what most 1440p monitors can display. The GPU’s 8 GB memory capacity is sufficient at this resolution, as the measured minimum of 92 FPS at Medium confirms stable performance.

At 3840x2160, the GPU is unequivocally the limiting factor. The 68 FPS at Low settings represents the maximum output the RX 7600 can achieve at 4K, regardless of CPU capacity. The CPU’s benchmark scores—such as 5912 in 3DMark max threads—show it is not constrained by the resolution increase, but the GPU’s 288.0 GB/s bandwidth and 2048 shading units simply cannot process the 4K pixel workload at higher presets. The 45% FPS drop from 1440p to 4K at every preset confirms this is a pure GPU bottleneck.

The scaling between presets further illustrates this divide. At 1080p, the drop from Low to Ultra is 39.9% (193 to 116 FPS), while at 1440p it is 40.0% (125 to 75 FPS), and at 4K it is 39.7% (68 to 41 FPS). This consistent percentage across resolutions indicates that the GPU’s relative performance degradation from preset changes is uniform, while the CPU maintains a stable baseline. The i5-12400F’s 73rd percentile ranking ensures it never becomes the limiting component, even at 1080p Low where the GPU is producing 193 FPS.