Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

46%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
211 FPS
Ultra 1080p Measured
127 FPS

1440p (2K / QHD)

Low 1440p Measured
137 FPS
Ultra 1440p Measured
82 FPS

4K (Ultra HD)

Low 4K Measured
74 FPS
Ultra 4K Measured
45 FPS
6.5ms Frame Time
10ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 14,185
Graphics Card
Required 27,325
Your GPU 16,014

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 45 54 65 74
1440p QHD 82 101 119 137
1080p Full HD 127 155 184 211

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 155
1920x1080 Low 211
1920x1080 Medium 184
1920x1080 Ultra 127
2560x1440 High 101
2560x1440 Low 137
2560x1440 Medium 119
2560x1440 Ultra 82
3840x2160 High 54
3840x2160 Low 74
3840x2160 Medium 65
3840x2160 Ultra 45

Performance Analysis: Doom on Your System

The Intel Core i5-10400F paired with the AMD Radeon RX 9060 delivers a wide range of performance in the 2016 FPS title Doom, depending on resolution and graphics preset. The recorded data shows that this combination scales predictably: lower resolutions and reduced settings push frame rates well beyond the 60 FPS playable threshold, while higher demands at 4K Ultra dip below it. This analysis examines the measured FPS breakdown, the best settings per resolution, how this combo ranks among tested systems, and the respective roles of the CPU and GPU in achieving these results.

Best Settings per Resolution

For those targeting 60 frames per second as the playable baseline, the most demanding preset that remains at or above that mark varies by resolution.

At 1920x1080, the Ultra preset is the highest visual quality that still clears the threshold. The measured average FPS here is 127, which is more than double the 60 FPS floor. This leaves substantial headroom for competitive play or high refresh rate displays, as even the most demanding settings remain far above the minimum requirement.

At 2560x1440, the Ultra preset also remains playable, with an average of 82 FPS. This is comfortably above the 60 FPS mark, though the margin is smaller than at 1080p. The High preset would yield 101 FPS average, showing that even at a higher resolution, the Ultra setting is not a stretch for this hardware.

At 3840x2160, the picture changes. The Medium preset is the most demanding setting that stays at or above 60 FPS, delivering an average of 65 FPS. The High preset falls to 54 FPS average, which is below the playable threshold. Low at 4K averages 74 FPS, but Medium offers a better visual experience while still holding above 60 FPS.

The data indicates that for 1080p and 1440p, players can max out the game at Ultra with no concerns. For 4K, Medium is the recommended ceiling if 60 FPS is the goal, as High and Ultra both drop below that line.

FAQ

*Q: Can this PC run Doom at 1080p with maximum settings?*

A: Yes, at 1920x1080 with the Ultra preset, the average FPS is 127, which is well above the 60 FPS playable threshold.

Q: What is the highest preset that maintains 60 FPS at 1440p?

A: The Ultra preset at 2560x1440 achieves an average of 82 FPS, so it is fully playable at the highest visual quality.

Q: Does 4K Ultra exceed the capabilities of this combo?

A: Yes, at 3840x2160 with Ultra settings, the average FPS drops to 45, which is below the 60 FPS threshold. High also falls short at 54 FPS average.

Q: What is the best 4K preset for this system?

A: Medium at 3840x2160, which delivers an average of 65 FPS. This is the most demanding preset that stays above 60 FPS at that resolution.

Q: How much performance is lost when moving from 1080p to 4K at Ultra settings?

A: At 1080p Ultra, the average is 127 FPS. At 4K Ultra, it drops to 45 FPS. This represents a reduction of 82 FPS from the lower to the higher resolution.

Q: Are the minimum and maximum FPS values recorded for all settings?

A: No. Only the Medium presets have both min and max FPS recorded. For 1920x1080 Medium, the range is 156 to 212; for 2560x1440 Medium, it is 101 to 137; for 3840x2160 Medium, it is 55 to 74. Other settings list only the average.

Measured FPS Breakdown

The recorded data provides a clear picture of how this combination performs across three resolutions and four settings. The following is the exact measured FPS breakdown.

At 1920x1080, the lowest tested setting is Low with an average of 211 FPS. Medium averages 184 FPS, with a recorded minimum of 156 and maximum of 212. High averages 155 FPS. Ultra, the most demanding preset, still delivers a strong 127 FPS average. The spread from Low to Ultra is 84 FPS, meaning that even the heaviest settings retain a high frame rate.

At 2560x1440, the Low preset averages 137 FPS. Medium averages 119 FPS, with min and max values of 101 and 137. High averages 101 FPS. Ultra averages 82 FPS. The drop from Low to Ultra at this resolution is 55 FPS. Notably, the 1440p High average of 101 FPS exactly matches the 1440p Medium minimum, suggesting some overlap in frame time distribution.

At 3840x2160, the Low preset averages 74 FPS. Medium averages 65 FPS, with a minimum of 55 and maximum of 74. High averages 54 FPS, which falls below the 60 FPS threshold. Ultra averages 45 FPS, the lowest recorded figure in the dataset. The difference between Low and Ultra at 4K is 29 FPS, a narrower gap than at 1080p or 1440p, indicating that 4K is more consistently demanding across settings.

The min and max values for Medium presets show that frame pacing is stable. At 1080p Medium, the min of 156 and max of 212 bracket the average of 184 closely. At 1440p Medium, the range from 101 to 137 around an average of 119 is similarly tight. At 4K Medium, the min of 55 and max of 74 around an average of 65 shows occasional dips below the average but no severe stuttering.

How This Combo Ranks

According to the database, this CPU and GPU combination ranks 2200 out of 3712 tested combos for Doom. This places it in the upper portion of the overall distribution, roughly in the top 59% of all configurations. While it is not a top-tier performer, the rank reflects that the i5-10400F and RX 9060 can handle the game well at most settings, with only 4K Ultra presenting a challenge.

The rank is derived from the measured FPS across all tested scenarios. The strong performance at 1080p and 1440p, where all presets exceed 60 FPS, contributes positively to the ranking. The 4K results, where High and Ultra fall below the threshold, hold the combo back from a higher position. Given that Doom is a well-optimized title from 2016, this rank indicates that the hardware is more than adequate for typical gaming at mainstream resolutions.

The percentile of 68 for the CPU and 59 for the GPU, relative to all tested parts, further contextualizes the rank. The CPU is stronger than the GPU in their respective pools, which suggests that the i5-10400F is less likely to be the bottleneck in this pairing.

Similar Performance Alternatives

For the CPU, the Intel Core i5-10400F has a benchmark score of 14185 average. Its nearest rivals, based on average benchmark scores, include the Intel Xeon 6756E with a score of 14163 and a delta of 0.2%, meaning the Xeon is effectively identical in performance. The AMD EPYC 7552 scores 14115, which is 0.5% lower. The Intel Core 7 160UL scores 14232, 0.3% higher, and the AMD Ryzen 3 7320C scores 14277, 0.6% higher. These deltas are all within a single percentage point, so any of these CPUs would produce nearly the same frame rates in Doom when paired with the same GPU.

For the GPU, the AMD Radeon RX 9060 has an average benchmark score of 16014. Its nearest rival is the NVIDIA GeForce RTX 3060 Ti with a score of 16129, which is 0.7% higher. The AMD Radeon R9 370X scores 15862, 1% lower, and the AMD Radeon RX 7700 scores 15852, also 1% lower. The AMD Radeon Pro W5500 scores 15679, 2.1% lower. These differences are small, so swapping the RX 9060 for any of these would yield similar FPS in Doom, with the RTX 3060 Ti being the closest match in performance.

In practical terms, a system with an Intel Xeon 6756E or an AMD Ryzen 3 7320C alongside an RTX 3060 Ti would behave almost identically to the tested combo. The tiny deltas in benchmark scores suggest that any of these alternatives would produce the same playability verdicts at each resolution and preset.

The Verdict

Based on the recorded data, this PC can run Doom at 60 FPS or higher in nearly all tested configurations. The verdict by resolution is clear:

At 1920x1080, all four presets (Low, Medium, High, Ultra) are playable. The best settings are Ultra, with an average FPS of 127. This is the optimal choice for maximum visual quality without sacrificing smoothness.

At 2560x1440, all four presets are also playable. The best settings are Ultra, with an average FPS of 82. Players can enjoy the highest quality at a higher resolution and still stay well above the 60 FPS line.

At 3840x2160, only the Low and Medium presets are playable. The best settings are Medium, with an average FPS of 65. High and Ultra do not meet the 60 FPS threshold, so they are not recommended for those who prioritize smooth gameplay.

The verdict is that this combo is fully capable of running Doom at 1080p and 1440p with every setting maxed out. At 4K, it requires a step down to Medium for playable frame rates. The game itself is from 2016, and these results reflect that this hardware is well suited to its demands.

CPU and GPU Roles

The data shows that the GPU is the primary factor in scaling performance across resolutions, while the CPU provides a stable foundation.

The measured FPS at 1080p Ultra is 127, at 1440p Ultra it is 82, and at 4K Ultra it is 45. This progression shows a clear drop as resolution increases, which is characteristic of GPU-bound workloads. The GPU must render more pixels at higher resolutions, and the Radeon RX 9060, with its 8 GB of GDDR6 memory and 128-bit bus, handles 1080p and 1440p easily but struggles at 4K Ultra.

The CPU, an Intel Core i5-10400F with 6 cores and 12 threads, maintains sufficient performance to avoid bottlenecking at these frame rates. The single-thread score of 688 in 3DMark and the multi-thread score of 4748 in 3DMark indicate a capable processor for a 2016 game. As resolution increases, the CPU load typically decreases relative to the GPU, which is why the same CPU can support both 1080p at 211 FPS (Low) and 4K at 74 FPS (Low) without issue.

The scaling between settings at a fixed resolution also highlights the GPU's role. At 1080p, moving from Low to Ultra reduces the average FPS from 211 to 127, a 40% decrease. At 1440p, the same move from Low to Ultra drops from 137 to 82, a 40% decrease as well. At 4K, Low to Ultra goes from 74 to 45, a 39% decrease. These consistent percentages suggest that the GPU is equally stressed by each preset level, regardless of resolution.

The CPU's role is more evident at lower resolutions where frame rates are higher. At 1080p Low, the 211 FPS average is likely near the CPU's limit for this game, as the GPU can render frames faster than the CPU can issue draw calls. At 4K Low, the 74 FPS average is well within the CPU's capabilities, proving that the GPU is the limiting factor at higher resolutions.

In summary, for Doom, the GPU dominates performance scaling. The CPU is sufficient for all tested scenarios, but the RX 9060's limits at 4K Ultra are what prevent this combo from achieving 60 FPS at that preset. Players looking to improve 4K performance would need a more powerful GPU, while those at 1080p and 1440p can rely on this setup to deliver high frame rates across all settings.