Instant compatibility check with FPS benchmarks and optimization tips
Doom
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 51 | 62 | 74 | 85 |
| 1440p QHD | 94 | 115 | 136 | 156 |
| 1080p Full HD | 145 | 178 | 210 | 241 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Doom on Your System
Similar Performance Alternatives
The Intel Core i5-10400F sits close to several other processors in aggregate benchmark scores. The nearest rival is the Intel Core 7 160UL, which scores 14232 against the i5-10400F's 14185, a difference of only 0.3 percent. The AMD Ryzen 3 7320C trails by a similar margin at 14277, while the Intel Xeon 6756E and AMD EPYC 7552 are within 0.5 percent of the i5-10400F's average score. In practical terms, any of these CPUs would deliver nearly identical frame pacing in Doom, assuming the GPU is not the limiting factor.
For the GPU side, the AMD Radeon RX 7700 has an average score of 15852. Its closest competitor is the AMD Radeon R9 370X at 15862, a negligible 0.1 percent gap. The AMD Radeon Pro W5500 is 1.1 percent behind, while the AMD Radeon RX 9060 sits 1 percent ahead. The NVIDIA GeForce RTX 3060 Ti leads the group by 1.7 percent with a score of 16129. When choosing a system with similar performance, a build pairing any of these GPUs with the i5-10400F would produce nearly interchangeable results in Doom at most settings.
The CPU's percentile ranking places it above 68 percent of all tested processors, while the GPU ranks above 58 percent of all tested GPUs. This suggests the pairing is slightly more CPU-heavy in the context of the full database, but both components are comfortably mid-range. The measured FPS data confirms that neither component becomes a severe bottleneck at 1080p or 1440p, as even the most demanding preset stays well above playable thresholds.
CPU and GPU Roles
At 1920x1080, the frame rates are so high that the CPU's single-thread performance becomes the primary constraint. The i5-10400F scores 688 in the 3dmark single-thread test and 1451 in Cinebench R23 single-core, which is adequate for high refresh rate gaming. The data shows that at Low settings, the average FPS reaches 241, which is near the practical limit for many displays. The gap between Low and Ultra at 1080p is 241 to 145 FPS, a 96 FPS spread that indicates the GPU is still doing significant work, but the CPU is keeping pace.
Moving to 2560x1440, the GPU begins to take a larger role. The average FPS at Ultra drops to 94, while Low produces 156 FPS. The scaling from 1080p to 1440p at Ultra settings is 145 to 94 FPS, a 35 percent reduction that aligns with the increased pixel count. The RX 7700's 16 GB of GDDR6 memory and 624.1 GB/s bandwidth provide ample headroom for the texture data in Doom, and the 256-bit bus width helps maintain consistent throughput at higher resolutions.
At 3840x2160, the GPU is clearly the dominant factor. The average FPS at Ultra falls to 51, below the 60 FPS playable threshold, while High settings produce 62 FPS. The difference between High and Ultra at 4K is 62 to 51 FPS, an 11 FPS gap that shows how sensitive the GPU is to the most demanding settings. The CPU's role at 4K is minimal, as even the Low preset averages 85 FPS, which is still above the 60 FPS threshold. The recorded data indicates that the RX 7700's compute capabilities, measured at 25.18 TFLOPS FP32, are the limiting factor at 4K Ultra, not the i5-10400F's six cores.
The scaling pattern across resolutions is consistent: at 1080p, the i5-10400F's 12 threads handle the game's engine overhead with room to spare, while at 4K, the RX 7700's 2560 shading units and 96 ROPs determine the final frame rate. The Medium preset at each resolution shows the middle ground, with 210 FPS at 1080p, 136 FPS at 1440p, and 74 FPS at 4K.
FAQ
Q: Can this system run Doom at 4K with playable frame rates?
A: Yes, but only up to High settings. The recorded data shows 62 FPS average at 3840x2160 High, which clears the 60 FPS threshold. Medium averages 74 FPS, and Low averages 85 FPS. Ultra falls short at 51 FPS.
Q: What is the best setting for 1440p gaming?
A: Ultra is the best setting at 2560x1440, delivering an average of 94 FPS. All four presets, Low, Medium, High, and Ultra, clear the 60 FPS threshold at this resolution.
Q: How does the CPU compare to its nearest rivals?
A: The i5-10400F scores 14185 on average. The Intel Core 7 160UL scores 14232, which is 0.3 percent higher. The AMD Ryzen 3 7320C scores 14277, 0.6 percent higher. The AMD EPYC 7552 scores 14115, 0.5 percent lower.
Q: Is the RX 7700 significantly faster than the RTX 3060 Ti?
A: No, the difference is small. The RX 7700 scores 15852, while the RTX 3060 Ti scores 16129, making the NVIDIA card 1.7 percent faster in aggregate benchmarks.
Q: What frame rates can I expect at 1080p Medium?
A: The measured average is 210 FPS, with a minimum of 179 FPS and a maximum of 242 FPS. This is one of the few presets with recorded minimum and maximum values.
Q: Does the system ever drop below 60 FPS?
A: Only at 4K Ultra, where the average is 51 FPS. Every other measured preset at every resolution maintains an average above 60 FPS. The lowest recorded minimum is 116 FPS at 1440p Medium.
The Verdict
This system can run Doom successfully across all three tested resolutions, with the sole exception of 4K Ultra. The database's verdictByResolution data shows that at 3840x2160, the playable settings are High, Low, and Medium, with High being the best choice at 62 FPS average. At 2560x1440, all four settings are playable, and Ultra is the best option at 94 FPS average. At 1920x1080, every preset clears 60 FPS, with Ultra averaging 145 FPS.
The practical takeaway is that 4K owners should stick to High or Medium settings to stay comfortably above 60 FPS. The 11 FPS difference between High and Ultra at 4K is not worth the visual trade-off for most players. At 1440p and below, the system has enough headroom to run maximum settings without concern.
The CPU's 68th percentile ranking and the GPU's 58th percentile ranking indicate a balanced pairing. The i5-10400F's six cores and 12 threads are sufficient for Doom's engine, which was released in 2016 and does not demand modern high-core-count processors. The RX 7700's 16 GB of VRAM ensures that texture-heavy scenes at 4K do not cause memory-related stutters, even though the compute power is not quite enough for 4K Ultra.
Measured FPS Breakdown
At 1920x1080, the lowest preset produces an average of 241 FPS. Medium averages 210 FPS, with a recorded minimum of 179 FPS and maximum of 242 FPS. High averages 178 FPS. Ultra averages 145 FPS. Every preset at this resolution far exceeds the 60 FPS playable threshold.
At 2560x1440, Low averages 156 FPS. Medium averages 136 FPS, with a minimum of 116 FPS and maximum of 156 FPS. High averages 115 FPS. Ultra averages 94 FPS. The minimum recorded value of 116 FPS at Medium still clears the threshold by a wide margin.
At 3840x2160, Low averages 85 FPS. Medium averages 74 FPS, with a minimum of 63 FPS and maximum of 85 FPS. High averages 62 FPS. Ultra averages 51 FPS. The Medium preset's minimum of 63 FPS is the only recorded minimum below 100 FPS across all presets, but it remains above the 60 FPS threshold.
The data reveals a consistent pattern: each resolution step down from 4K to 1440p to 1080p roughly doubles the average FPS at the same preset. For example, High goes from 62 to 115 to 178 FPS as resolution decreases. The exception is Ultra, where the GPU's compute limits compress the scaling, producing 51, 94, and 145 FPS respectively.
How This Combo Ranks
The combination of the Intel Core i5-10400F and AMD Radeon RX 7700 ranks 1724 out of 3712 tested system combinations in the database for Doom. This places the pairing in the upper 46 percent of all tested configs, which is a respectable position given that the database includes many high-end systems with newer CPUs and more powerful GPUs.
The rank reflects the system's ability to maintain high frame rates at 1080p and 1440p, while falling short of the most demanding 4K Ultra settings. A system ranking above 50 percent of all tested combos indicates that this pairing is well suited for mainstream gaming at 1440p and below. The GPU's 58th percentile ranking versus all GPUs is the primary driver of the system's position, as the CPU's 68th percentile ranking provides enough headroom to avoid holding back the GPU at most settings.
In the context of Doom specifically, the game's 2016 release date means it does not stress modern CPUs as heavily as newer titles. The i5-10400F's single-thread score of 688 in 3dmark and 1451 in Cinebench R23 is more than sufficient for the game's engine. The RX 7700's 25.18 TFLOPS FP32 compute and 393.4 GTexel/s texture rate handle the game's visual effects efficiently, with the 4K Ultra preset being the only configuration that pushes the GPU past its limits.