Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

45%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
193 FPS
Ultra 1080p Measured
116 FPS

1440p (2K / QHD)

Low 1440p Measured
125 FPS
Ultra 1440p Measured
75 FPS

4K (Ultra HD)

Low 4K Measured
68 FPS
Ultra 4K Measured
41 FPS
7ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 14,185
Graphics Card
Required 27,325
Your GPU 15,171

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 41 50 59 68
1440p QHD 75 92 109 125
1080p Full HD 116 142 168 193

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 142
1920x1080 Low 193
1920x1080 Medium 168
1920x1080 Ultra 116
2560x1440 High 92
2560x1440 Low 125
2560x1440 Medium 109
2560x1440 Ultra 75
3840x2160 High 50
3840x2160 Low 68
3840x2160 Medium 59
3840x2160 Ultra 41

Performance Analysis: Doom on Your System

The Intel Core i5-10400F and AMD Radeon RX 7600 combination delivers a wide spread of performance across the four presets and three resolutions recorded for Doom, ranging from a demanding 4K Ultra result that dips below 60 FPS to a 1080p Low result that nearly triples the playability threshold. The database shows this is a pairing that can handle the game comfortably at 1440p and 1080p, while 4K requires a settings compromise to maintain smooth frame rates.

Measured FPS Breakdown

At 1920x1080, the combination produces its highest frame rates. The Low preset averages 193 FPS, with the Medium preset recording an average of 168 FPS, a minimum of 143 FPS, and a maximum of 193 FPS. High averages 142 FPS, while the Ultra preset still delivers a strong 116 FPS average. The spread from Low to Ultra is 77 FPS, indicating that the GPU has ample headroom at this resolution even with the most demanding settings.

Moving to 2560x1440, the frame rates remain well above the 60 FPS threshold. Low averages 125 FPS, Medium averages 109 FPS with a minimum of 92 FPS and a maximum of 125 FPS, High averages 92 FPS, and Ultra averages 75 FPS. The drop from 1080p to 1440p is consistent: Low falls from 193 to 125 FPS (a 35% reduction), Medium from 168 to 109 FPS (35% reduction), High from 142 to 92 FPS (35% reduction), and Ultra from 116 to 75 FPS (also a 35% reduction). This uniform scaling suggests the GPU is the primary limiter at these resolutions, with the CPU not imposing a significant bottleneck.

At 3840x2160, performance becomes more constrained. Low averages 68 FPS, which is the only preset at this resolution that clears the 60 FPS threshold. Medium averages 59 FPS with a minimum of 50 FPS and a maximum of 68 FPS, putting it just below the playable mark. High averages 50 FPS, and Ultra drops to 41 FPS. The scaling from 1440p to 4K is steeper: Low falls from 125 to 68 FPS (46% reduction), Medium from 109 to 59 FPS (46% reduction), High from 92 to 50 FPS (46% reduction), and Ultra from 75 to 41 FPS (45% reduction). This larger drop compared to the 1080p-to-1440p transition indicates that the RX 7600’s 8 GB memory and 128-bit bus are being pushed harder at 4K, where pixel throughput demands increase significantly.

The recorded data only includes min and max FPS for the Medium preset at each resolution. At 1080p Medium, the minimum of 143 FPS and maximum of 193 FPS show a tight range, suggesting consistent frame delivery. At 1440p Medium, the minimum of 92 FPS and maximum of 125 FPS indicate a broader but still stable range. At 4K Medium, the minimum of 50 FPS and maximum of 68 FPS reveal more fluctuation, with the average sitting at 59 FPS. This variance at 4K is notable because it means even the Medium preset, which averages just below 60 FPS, will periodically drop to 50 FPS during intense scenes.

CPU and GPU Roles

The data indicates that the GPU plays the dominant role in shaping performance across resolutions. The consistent percentage drops when moving from 1080p to 1440p, and then from 1440p to 4K, point to the RX 7600 being the limiting factor at all three resolutions. The i5-10400F, with its 6 cores and 12 threads, provides sufficient processing power to feed the GPU without creating a bottleneck, as evidenced by the frame rates scaling predictably with resolution changes.

The CPU’s benchmark scores support this interpretation. The i5-10400F scores 4,318 in Cinebench R20 multi-core and 609 in single-core, placing it in the 68th percentile of all CPUs. Its nearest rivals include the Intel Xeon 6756E with a 0.2% higher average score, the AMD EPYC 7552 with a 0.5% higher average score, and the Intel Core 7 160UL with a 0.3% lower average score. These are all highly capable server or workstation processors, which suggests the i5-10400F is not a weak link in this gaming scenario.

The GPU’s benchmark profile shows a different story. The RX 7600 scores 16,634 in PassMark G3D and 8,790 in GPU compute, placing it in the 57th percentile of all GPUs. Its nearest rivals include the NVIDIA GeForce RTX 3050 OEM with a 0.2% higher average score, the AMD Radeon 680M with a 0.7% higher average score, and the AMD Radeon Pro 560X with a 0.6% lower average score. These rivals span different market segments, from integrated graphics to entry-level discrete cards, which indicates the RX 7600 sits in a mid-range tier.

At 1080p, the GPU is clearly the limiting factor because even the Ultra preset averages 116 FPS, which is far above the 60 FPS threshold. The CPU has enough headroom to push even higher frame rates if the GPU could deliver them. At 1440p, the same pattern holds, with Ultra averaging 75 FPS. At 4K, the GPU becomes even more stressed, as evidenced by the steeper performance drop from 1440p to 4K compared to the 1080p-to-1440p transition. The CPU’s role diminishes further at higher resolutions because the GPU’s pixel processing time dominates the frame rendering loop.

The RX 7600’s memory configuration, 8 GB of GDDR6 on a 128-bit bus with 288.0 GB/s bandwidth, likely explains the 4K performance cliff. At 4K, the frame buffer requirements exceed what this memory subsystem can efficiently handle, causing the larger percentage drop compared to lower resolutions. The i5-10400F’s 12 MB of L3 cache and 42.7 GB/s memory bandwidth are sufficient for feeding the GPU with draw calls and geometry data, but they do not compensate for the GPU’s memory limitations at 4K.

Best Settings per Resolution

At 1920x1080, the Ultra preset is the most demanding option and averages 116 FPS, well above the 60 FPS threshold. This is the recommended setting for this resolution because it provides the highest visual quality while maintaining a large margin above the playable floor. The database confirms this is the best setting, with the verdict listing Ultra as the playable choice.

At 2560x1440, Ultra also emerges as the best setting, averaging 75 FPS. This is still 15 FPS above the 60 FPS threshold, leaving some headroom for demanding scenes. The Medium preset averages 109 FPS with a minimum of 92 FPS, which offers more performance headroom but sacrifices visual fidelity. The data supports Ultra as the optimal balance of quality and performance at this resolution.

At 3840x2160, the situation changes. The Low preset averages 68 FPS, which is the only setting that clears the 60 FPS threshold. Medium averages 59 FPS with a minimum of 50 FPS, placing it just below the playable mark. High averages 50 FPS, and Ultra drops to 41 FPS. The verdict indicates Low is the best playable setting at 4K, with the average of 68 FPS providing a modest 8 FPS margin above the threshold. This margin is thinner than at lower resolutions, so users may experience occasional drops below 60 FPS during intense combat sequences.

The pattern across resolutions is clear: at 1080p and 1440p, the GPU has enough headroom to run the highest quality preset at playable frame rates, while at 4K, users must drop to the lowest quality preset to maintain smooth performance. The 4K Medium preset’s minimum of 50 FPS highlights the risk of relying on average frame rates alone, as the variance could cause noticeable stutter in fast-paced action.

Similar Performance Alternatives

The CPU’s nearest rivals, based on average benchmark scores, offer similar processing capabilities. The Intel Xeon 6756E has a 0.2% higher average score, the AMD EPYC 7552 has a 0.5% higher average score, the Intel Core 7 160UL has a 0.3% lower average score, and the AMD Ryzen 3 7320C has a 0.6% lower average score. These processors would likely produce nearly identical frame rates in Doom when paired with the same RX 7600, since the i5-10400F is not a bottleneck in this configuration.

The GPU’s nearest rivals include the NVIDIA GeForce RTX 3050 OEM with a 0.2% higher average score, the AMD Radeon 680M with a 0.7% higher average score, the AMD Radeon Pro 560X with a 0.6% lower average score, and the NVIDIA GeForce GTX 660 Ti with a 0.7% lower average score. The RTX 3050 OEM is the most direct competitor, with its nearly identical average score suggesting it would produce similar frame rates in Doom across all resolutions and presets. The Radeon 680M, despite being an integrated GPU, has a slightly higher average score, which is surprising given its typical market position, but the benchmark data supports this comparison.

The GTX 660 Ti and Radeon Pro 560X, with their lower average scores, would likely perform a few percent worse in Doom. This could translate to 3-5 FPS lower at 1080p Ultra, potentially dropping the 4K Low preset from 68 FPS to around 65 FPS, which would still be playable but with less margin. The practical takeaway is that users with any of these GPU alternatives should expect similar gameplay experiences, with differences of only a few frames per second.

The Verdict

The data shows this PC can run Doom effectively at two of the three tested resolutions. At 1920x1080, all four presets clear the 60 FPS threshold, with Ultra averaging 116 FPS. At 2560x1440, all four presets also clear 60 FPS, with Ultra averaging 75 FPS. At 3840x2160, only the Low preset averages above 60 FPS at 68 FPS, while Medium averages 59 FPS, High averages 50 FPS, and Ultra averages 41 FPS.

The verdict by resolution confirms this analysis. At 1080p, the best playable setting is Ultra with 116 FPS. At 1440p, the best playable setting is Ultra with 75 FPS. At 4K, the best playable setting is Low with 68 FPS. The 4K Medium preset, with its average of 59 FPS and minimum of 50 FPS, is not recommended for consistent playability, as the frame rate dips below 60 FPS regularly.

Users with a 1080p or 1440p monitor can run Doom at maximum settings with smooth performance. Users with a 4K monitor must accept reduced visual quality to maintain playable frame rates, and even then, the margin above 60 FPS is relatively slim. The combination is well-suited for 1080p and 1440p gaming, but it falls short of delivering a consistent 60 FPS experience at 4K with higher quality presets.

FAQ

Q: What is the highest preset that maintains at least 60 FPS at 1920x1080?

A: The Ultra preset averages 116 FPS at 1080p, making it the most demanding setting that clears the 60 FPS threshold.

Q: How does the 4K Medium preset compare to the 4K Low preset in terms of frame stability?

A: At 4K, Medium averages 59 FPS with a minimum of 50 FPS and a maximum of 68 FPS, while Low averages 68 FPS. The Medium preset dips below 60 FPS frequently, whereas Low maintains a playable average.

Q: Which component is more important for Doom performance at 1440p?

A: The GPU is the primary factor, as the frame rate scaling from 1080p to 1440p shows a consistent 35% reduction across all presets, indicating the RX 7600 is the limiting component.

Q: What CPU models are most similar to the Intel Core i5-10400F in performance?

A: The Intel Xeon 6756E and AMD EPYC 7552 have average scores within 0.2% and 0.5% higher, respectively, while the Intel Core 7 160UL and AMD Ryzen 3 7320C are within 0.3% and 0.6% lower.

Q: Is the 4K High preset playable with this combination?

A: No, the 4K High preset averages 50 FPS, which is 10 FPS below the 60 FPS playable threshold.

Q: What GPU alternatives would produce nearly identical frame rates in Doom?

A: The NVIDIA GeForce RTX 3050 OEM has an average score 0.2% higher than the RX 7600, making it the closest performance match, while the AMD Radeon 680M is 0.7% higher and the AMD Radeon Pro 560X is 0.6% lower.

How This Combo Ranks

The Intel Core i5-10400F and AMD Radeon RX 7600 combination ranks 2,540 out of 3,712 tested combos for Doom. This places it in the upper third of all configurations in the database, which is a solid position given the game’s age and the hardware’s mid-range positioning. The CPU ranks in the 68th percentile of all CPUs, while the GPU ranks in the 57th percentile, meaning the combo’s overall rank is influenced more by the GPU’s lower relative standing.

This rank suggests that while the combination performs well in absolute terms, there are roughly 1,172 other tested combos that deliver higher frame rates in Doom. Many of these would feature more powerful GPUs, such as higher-tier Radeon or GeForce cards, or newer CPUs with better single-thread performance. The gap between this combo’s rank and the top of the list is likely driven by the RX 7600’s mid-range position, as the CPU is less of a limiting factor based on the benchmark data.

For users considering this hardware, the rank indicates that it is a capable but not exceptional performer for Doom specifically. The game is well-optimized and runs smoothly at 1080p and 1440p, but the 4K experience requires compromises. The combination’s position in the database reflects its balanced performance profile, with no single component dragging the overall results down significantly.