Instant compatibility check with FPS benchmarks and optimization tips
Doom
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 36 | 44 | 46 | 54 |
| 1440p QHD | 60 | 74 | 87 | 104 |
| 1080p Full HD | 97 | 119 | 137 | 159 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Doom on Your System
The Intel Core i3-12100F paired with the NVIDIA GeForce GTX 1070 delivers a playable experience in Doom at 1080p and 1440p, but it falls short of the 60 FPS threshold at 4K. The recorded data shows that this combination is well-suited for high-refresh-rate gaming at standard resolutions, though the most demanding settings at 4K will require compromises.
Best Settings per Resolution
For the most demanding preset that remains at or above 60 FPS, the data points to a clear hierarchy across resolutions.
At 1920x1080, the Ultra preset is the most demanding setting that still clears the 60 FPS threshold. The recorded average frame rate at Ultra is 97 FPS. This is comfortably above the playable threshold, leaving headroom for demanding scenes. The High preset runs at 118.5 FPS, Medium at 137.1 FPS, and Low at 158.6 FPS, all of which are also playable but less demanding than Ultra.
At 2560x1440, the best playable setting is High, which produces an average of 74 FPS. The Medium preset also stays above the threshold at 86.7 FPS, and Low runs at 104 FPS. However, the Ultra preset at this resolution drops to 59.7 FPS, just below the 60 FPS target, so it is not recommended for a consistently smooth experience.
At 3840x2160, no preset achieves an average of 60 FPS or higher. The closest is Low at 54.1 FPS, followed by Medium at 46.3 FPS, High at 43.8 FPS, and Ultra at 35.9 FPS. All of these fall short of the playable threshold, meaning the system cannot maintain smooth gameplay at 4K with this game.
CPU and GPU Roles
The scaling of frame rates across resolutions and presets reveals that the GTX 1070 is the primary limiting factor at higher resolutions, while the i3-12100F provides sufficient headroom at lower resolutions.
As resolution increases from 1920x1080 to 2560x1440, the average FPS drops by roughly 20 to 40 percent depending on the preset. For example, at High settings, the frame rate falls from 118.5 FPS to 74 FPS, a reduction of approximately 38 percent. This steep decline indicates that the GPU is becoming more heavily loaded as pixel count rises, a pattern typical of GPU-bound scenarios.
The further drop to 3840x2160 is even more pronounced. At High settings, the frame rate falls from 74 FPS at 1440p to 43.8 FPS at 4K, a reduction of about 41 percent. At Ultra settings, the decline is from 59.7 FPS to 35.9 FPS. These substantial losses demonstrate that the GTX 1070 cannot sustain high frame rates at 4K, even with the relatively light CPU load from the i3-12100F.
The CPU's role becomes more apparent at lower resolutions. At 1920x1080, the difference between Low and Ultra settings is approximately 62 FPS (158.6 versus 97 FPS), indicating that the GPU is still the main constraint but the CPU is capable of feeding it enough data to reach high frame rates. The i3-12100F, with its 4 cores and 8 threads, shows no signs of bottlenecking at these frame rates. Its benchmark scores, such as a Cinebench R23 multi-core score of 11860 and a single-core score of 1674, suggest it has ample processing power for a game of this era.
Measured FPS Breakdown
The recorded FPS data provides a complete picture of performance across all tested configurations.
1920x1080:
- Low: average 158.6 FPS
- Medium: average 137.1 FPS
- High: average 118.5 FPS
- Ultra: average 97 FPS
2560x1440:
- Low: average 104 FPS
- Medium: average 86.7 FPS
- High: average 74 FPS
- Ultra: average 59.7 FPS
3840x2160:
- Low: average 54.1 FPS
- Medium: average 46.3 FPS
- High: average 43.8 FPS
- Ultra: average 35.9 FPS
The pattern is consistent: each step up in settings costs roughly 10 to 20 FPS at 1080p, with a similar relative loss at higher resolutions. The margin between Low and Ultra widens as resolution increases, from about 61 FPS at 1080p to about 18 FPS at 4K. This suggests that the GPU's raw throughput becomes the dominant factor at high pixel counts, while the settings adjustments have less absolute impact.
FAQ
Q: Can this system run Doom at 1080p with maximum settings?
A: Yes. The Ultra preset at 1920x1080 produces an average of 97 FPS, which is well above the 60 FPS playable threshold. It is the most demanding setting that maintains smooth gameplay at this resolution.
Q: What is the best playable setting at 1440p?
A: The High preset at 2560x1440 yields an average of 74 FPS. This is the most demanding setting that stays at or above 60 FPS. Ultra at this resolution averages 59.7 FPS, which is marginally below the threshold.
Q: Is 4K gaming possible with this hardware?
A: No. At 3840x2160, even the Low preset averages only 54.1 FPS, which is below the 60 FPS target. No settings combination reaches the playable threshold at this resolution.
Q: How much performance does the Ultra preset cost compared to High at 1080p?
A: At 1920x1080, the Ultra preset averages 97 FPS while High averages 118.5 FPS. The difference is approximately 21.5 FPS, or about 18 percent lower performance for the highest settings.
Q: Does the CPU limit performance at any resolution?
A: The data suggests the i3-12100F is not a bottleneck in this game. The frame rates scale consistently with GPU load across resolutions, and the CPU's benchmark scores, including a PassMark single-thread score of 3444 and a multi-thread score of 14015, indicate sufficient processing capability for the frame rates observed.
Q: What is the frame rate difference between Low and Ultra at 1440p?
A: At 2560x1440, Low averages 104 FPS while Ultra averages 59.7 FPS. The difference is approximately 44 FPS, showing that settings have a substantial impact on performance at this resolution.
How This Combo Ranks
Within the database of tested combinations for Doom, this specific pairing of the Intel Core i3-12100F and NVIDIA GeForce GTX 1070 holds a rank of 3060 out of 3712 tested combos. This places it in the lower third of all tested systems, which is consistent with the hardware's age and market segment.
The CPU itself sits at the 68th percentile when compared to all CPUs in the database, indicating that it is a mid-range processor. Its nearest rivals in terms of average benchmark score include the Intel Core 3 N355 with a delta of 0 percent, the Intel Core i5-9500 with a delta of 0.3 percent, and the Intel Core 5 120UL with a delta of -0.7 percent. These close scores suggest that the i3-12100F performs similarly to several other mid-range processors.
The GPU, the GTX 1070, is at the 47th percentile among all GPUs, placing it slightly below the median. Its nearest rivals are the AMD FirePro W5000 with a delta of -0.2 percent, the NVIDIA Quadro M2000M with a delta of -0.5 percent, and the NVIDIA Tesla M10 with a delta of 0.6 percent. These comparisons show that the GTX 1070 remains competitive with several other graphics cards from its era, though it is far from top-tier performance.
The combination rank of 3060 out of 3712 reflects the overall capability of the system. While it is not a high-end rig, it is not the lowest-performing either. The ranking makes sense given that the CPU is a modern budget processor and the GPU is a previous-generation mid-range card.
The Verdict
The question of whether this PC can run Doom depends entirely on the resolution and settings chosen.
At 1920x1080, the answer is a definitive yes. All four presets, Low, Medium, High, and Ultra, produce average frame rates above 60 FPS. The Ultra preset runs at 97 FPS, which is more than sufficient for smooth gameplay. This is the recommended configuration for the best visual quality without sacrificing performance.
At 2560x1440, the system remains playable with the High, Low, and Medium presets. The High preset at 74 FPS is the best visual option that stays above the threshold. The Ultra preset at 59.7 FPS is technically below 60 FPS, so it is not recommended for a consistently smooth experience.
At 3840x2160, the system cannot reach 60 FPS on any preset. The highest average is 54.1 FPS on Low settings, which is below the playable threshold. The verdict is clear: 4K gaming is not viable with this hardware.
Overall, this combination is well-suited for 1080p gaming with high settings and for 1440p gaming with medium to high settings. It will not handle 4K in Doom, regardless of settings.
Similar Performance Alternatives
For users considering this exact combination, several nearby hardware options would behave similarly based on the database's benchmark comparisons.
The Intel Core i3-12100F has several closely matched rivals. The Intel Core 3 N355 has an average score of 13492, nearly identical to the i3-12100F's 13494, with a delta of 0 percent. The Intel Core i5-9500 scores 13452, just 0.3 percent lower, and the Intel Core 5 120UL scores 13594, which is 0.7 percent higher. The Intel Core i7-1250U scores 13351, about 1.1 percent lower. Any of these CPUs would deliver similar frame rates in Doom, assuming the same GPU and settings.
The NVIDIA GeForce GTX 1070 also has comparable alternatives. The AMD FirePro W5000 has an average score of 9803, which is 0.2 percent higher than the GTX 1070's 9780. The NVIDIA Quadro M2000M scores 9832, about 0.5 percent higher. The NVIDIA Tesla M10 scores 9724, about 0.6 percent lower, and the NVIDIA Tesla C2070 scores 9716, about 0.7 percent lower. These GPUs would produce frame rates within a few percentage points of the GTX 1070, meaning the overall gaming experience would be nearly identical.
Users with any of these alternative CPUs or GPUs can expect very similar performance in Doom. The differences in average benchmark scores are small enough that the measured FPS values would likely fall within a margin of a few frames per second. This makes the i3-12100F and GTX 1070 combination a representative example of a broader class of mid-range hardware from this era, all of which are capable of smooth 1080p and 1440p gaming but struggle at 4K.