Instant compatibility check with FPS benchmarks and optimization tips
Doom
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 99 | 121 | 143 | 162 |
| 1440p QHD | 181 | 221 | 258 | 300 |
| 1080p Full HD | 279 | 340 | 402 | 462 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Doom on Your System
This is a simple case on paper: the AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 5090 combination is ranked 33rd out of 3712 tested hardware combos for Doom, and the measured data shows that every single settings preset at every resolution tested clears the 60 FPS playable threshold. The real question is not whether this PC can run the game, but how much headroom it has at the top end, and the benchmark results indicate that headroom is substantial enough to make the choice of settings purely a matter of display refresh rate and personal preference for visual fidelity.
Best Settings per Resolution
The data shows that this system does not require any compromise on visual quality to hit 60 FPS. At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, which delivers an average of 98.5 FPS. This is a comfortable margin above the playable threshold, meaning you can run the game at maximum settings without concern. The step down to High offers a significant performance boost to 121.1 FPS, but it is not necessary for playability.
At 2560x1440, the verdict is the same: Ultra is the best playable setting, with an average of 181.4 FPS. This is more than triple the 60 FPS threshold, so there is no reason to drop below the highest preset. The gap between High and Ultra at this resolution is notable—221.4 FPS versus 181.4 FPS—but both are far beyond what any standard display needs for smooth gameplay.
At 1920x1080, Ultra again takes the top spot, averaging 279.4 FPS. This is a scenario where the GPU is likely the limiting factor, as the CPU has plenty of headroom, but the result is still exceptional. For players with high-refresh-rate monitors, the difference between Ultra and Low at this resolution is substantial—279.4 FPS versus 462.3 FPS—so competitive players might prefer lower settings, but for the purposes of the 60 FPS threshold, Ultra is the clear recommendation.
CPU and GPU Roles
The benchmark data reveals a clear pattern: at lower resolutions, the CPU becomes more relevant, while at higher resolutions, the GPU carries the load. This is evident from the scaling between presets at each resolution. At 1920x1080, moving from Low to Ultra reduces the average FPS from 462.3 to 279.4, a drop of roughly 40%. At 2560x1440, the same preset change goes from 300 to 181.4 FPS, a drop of about 40% as well. At 3840x2160, the drop from Low to Ultra is from 162.1 to 98.5 FPS, again around 40%.
The fact that the relative scaling is consistent across resolutions suggests that neither component is being completely saturated at any point. However, the absolute numbers tell a different story. At 1080p Low, the system hits 462.3 FPS, which is an extreme load on the CPU's single-thread performance. The Ryzen 9 9950X3D has a single-thread score of 1292 in 3dmark and 4737 in Passmark, which is strong, but at such high frame rates, the CPU's per-core performance becomes the bottleneck. At 4K Ultra, the GPU is clearly the dominant factor, as the RTX 5090's 32 GB of memory and 1.79 TB/s bandwidth are being fully utilized.
The practical takeaway is that for 1080p and 1440p gaming, the CPU matters more than it does at 4K. The 9950X3D's 16 cores and 32 threads are overkill for Doom, but its strong single-core performance ensures that it does not hold back the GPU at lower resolutions. At 4K, the GPU is the primary driver of performance, and the CPU's role diminishes.
Measured FPS Breakdown
The measured FPS data is clean and consistent. At 3840x2160, the system averages 162.1 FPS on Low, 142.6 FPS on Medium, 121.1 FPS on High, and 98.5 FPS on Ultra. The step from Medium to High is a 15% drop, while the step from High to Ultra is a 19% drop. This is a typical scaling curve for a GPU-bound scenario.
At 2560x1440, the averages are 300 FPS on Low, 257.9 FPS on Medium, 221.4 FPS on High, and 181.4 FPS on Ultra. The jumps are relatively even, with each preset tier costing roughly 15-20% performance. The 300 FPS cap on Low is notable—it suggests the game engine or the measurement tool has a hard cap at this resolution, as 300 is a round number and the actual performance could be higher.
At 1920x1080, the averages are 462.3 FPS on Low, 401.9 FPS on Medium, 340 FPS on High, and 279.4 FPS on Ultra. The scaling here is more linear, with each tier dropping about 15-18%. The 1080p Low result of 462.3 FPS is the highest single measurement in the dataset, indicating that at this resolution, the CPU is the limiting factor and the GPU is not fully utilized.
No min or max FPS values are provided in the data, so the analysis relies solely on average FPS. This is worth noting because Doom is a fast-paced FPS, and frame time consistency matters, but the high averages suggest that even the lowest 1% lows would likely remain above 60 FPS given the massive headroom.
The Verdict
This PC can run Doom flawlessly at every resolution and settings preset tested. The verdict by resolution is unambiguous: all four settings presets—Low, Medium, High, and Ultra—are playable at 3840x2160, 2560x1440, and 1920x1080. The best settings at each resolution are Ultra, with average FPS of 98.5 at 4K, 181.4 at 1440p, and 279.4 at 1080p.
The 60 FPS threshold is cleared with enormous margins. At 4K Ultra, the system delivers 64% more than the threshold. At 1440p Ultra, it delivers triple the threshold. At 1080p Ultra, it delivers more than four and a half times the threshold. There is no scenario in the measured data where this hardware fails to meet the playable standard.
The only caveat is the lack of min/max FPS data. Average FPS above 60 does not guarantee that every frame is above 60, but given that the lowest average is 98.5 FPS (4K Ultra), it is highly unlikely that any frame would dip below 60. The system is overkill for this game, and the data suggests that it would run Doom smoothly even if the resolution were higher than 4K.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the AMD Ryzen 9 9950X3D has an average benchmark score of 75779, which is nearly identical to the AMD Ryzen 7 PRO 9755 (75738, 0.1% slower) and the AMD Ryzen 7 PRO 9755X3D (75716, 0.1% slower). The AMD EPYC 8224P (75582, 0.3% slower) and the Intel Core Ultra 9 285 (75488, 0.4% slower) are also within a fraction of a percent. This means that if you had any of these CPUs instead of the 9950X3D, the Doom benchmark results would be virtually unchanged, as the game is not heavily CPU-bound at the resolutions tested.
For the GPU, the RTX 5090 has an average benchmark score of 79842. Its nearest rivals include the NVIDIA Tesla P100 PCIe 16 GB (79605, 0.3% slower), the NVIDIA Tesla P100 PCIe 12 GB (79396, 0.6% slower), and the AMD Radeon RX 6850M XT (78940, 1.1% slower). The AMD Radeon Pro Vega 64X is actually 1.4% faster with a score of 80959. These deltas are all within 1.4%, meaning that swapping the RTX 5090 for any of these alternatives would produce nearly identical frame rates in Doom. The Tesla P100 cards are workstation parts, but their performance profile aligns closely with the RTX 5090 for this game.
In practical terms, this means that the system's performance in Doom is not unique to this exact CPU and GPU pairing. Any of the listed alternatives would provide a similar experience, though the RTX 5090's 32 GB of VRAM and modern feature set might matter for other games.
FAQ
Q: What is the highest settings preset that stays above 60 FPS at 4K?
A: Ultra settings at 3840x2160 deliver an average of 98.5 FPS, which is the most demanding preset tested and remains well above the 60 FPS playable threshold.
Q: Is there any resolution where this system cannot hit 60 FPS?
A: No. The data shows that all four settings presets (Low, Medium, High, Ultra) at 1080p, 1440p, and 4K all average above 60 FPS, with the lowest result being 98.5 FPS at 4K Ultra.
Q: How much faster is Low settings compared to Ultra at 1440p?
A: At 2560x1440, Low settings average 300 FPS while Ultra averages 181.4 FPS. The Low preset is roughly 65% faster, but both are far beyond the 60 FPS threshold.
Q: Does the CPU or GPU matter more for this game?
A: At 1080p and 1440p, the CPU's single-thread performance is more relevant, as frame rates are very high. At 4K, the GPU becomes the dominant factor, with the RTX 5090's memory bandwidth and compute power driving performance.
Q: How does this system rank compared to other hardware combos for Doom?
A: This combination ranks 33rd out of 3712 tested combos, placing it in the top 1% of all systems tested for this game.
Q: Is there a frame rate cap at 1440p Low?
A: The data shows exactly 300 FPS average at 2560x1440 Low settings, which is a round number and suggests a cap, either in the game engine or the measurement tool. The actual performance could be higher.
Q: What CPU alternatives would perform similarly in Doom?
A: The AMD Ryzen 7 PRO 9755, AMD Ryzen 7 PRO 9755X3D, AMD EPYC 8224P, and Intel Core Ultra 9 285 are all within 0.4% of the Ryzen 9 9950X3D in average benchmark score, so they would produce nearly identical Doom frame rates.