Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

95%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
243 FPS
Ultra 1080p Measured
146 FPS

1440p (2K / QHD)

Low 1440p Measured
157 FPS
Ultra 1440p Measured
95 FPS

4K (Ultra HD)

Low 4K Measured
85 FPS
Ultra 4K Measured
51 FPS
5.6ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 75,779
Graphics Card
Required 27,325
Your GPU 26,331

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 51 63 74 85
1440p QHD 95 116 137 157
1080p Full HD 146 179 211 243

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 179
1920x1080 Low 243
1920x1080 Medium 211
1920x1080 Ultra 146
2560x1440 High 116
2560x1440 Low 157
2560x1440 Medium 137
2560x1440 Ultra 95
3840x2160 High 63
3840x2160 Low 85
3840x2160 Medium 74
3840x2160 Ultra 51

Performance Analysis: Doom on Your System

The AMD Ryzen 9 9950X3D paired with the NVIDIA GeForce RTX 5060 delivers a wide range of performance in Doom, scaling from demanding 4K Ultra settings to exceptionally high frame rates at 1080p. The measured data shows this combination is capable of maintaining playable performance across most settings, with the most significant headroom appearing at lower resolutions.

Measured FPS Breakdown

At 3840x2160, the combination produces an average of 51 FPS on Ultra settings, which falls below the 60 FPS playable threshold. Dropping to High settings raises the average to 63 FPS, while Medium settings yield 74 FPS with a minimum of 63 FPS and a maximum of 85 FPS. The Low preset at 4K delivers 85 FPS on average, indicating that the most demanding resolution requires a trade-off between visual fidelity and frame rate smoothness.

Moving to 2560x1440, the performance headroom expands considerably. Ultra settings produce an average of 95 FPS, comfortably above the playable threshold. High settings reach 116 FPS, Medium settings average 137 FPS with a minimum of 116 FPS and a maximum of 157 FPS, and Low settings hit 157 FPS on average. The data shows a clear progression where each reduction in settings adds roughly 20-30 FPS at this resolution.

At 1920x1080, the combination shows its strongest performance. Ultra settings average 146 FPS, High settings reach 179 FPS, Medium settings deliver 211 FPS with a minimum of 180 FPS and a maximum of 243 FPS, and Low settings achieve 243 FPS on average. The scaling from 1440p to 1080p is substantial, with the Ultra preset improving by 51 FPS and the Low preset improving by 86 FPS.

The measured FPS data reveals that the gap between resolutions narrows as settings decrease. At Low settings, the difference between 4K and 1080p is 158 FPS, whereas at Ultra settings the same resolution gap is 95 FPS. This pattern suggests that the GPU's rendering workload scales more steeply with resolution at higher quality presets.

FAQ

Q: Can this combination maintain 60 FPS at 4K with the highest settings?

A: No. The Ultra preset at 3840x2160 produces an average of 51 FPS, which is below the 60 FPS playable threshold. The best playable setting at 4K is High, which achieves an average of 63 FPS.

Q: What is the maximum average frame rate achievable at 1080p?

A: The Low preset at 1920x1080 delivers the highest measured average at 243 FPS. The Ultra preset at the same resolution still produces a strong 146 FPS average.

Q: How does the Medium preset perform across all three resolutions?

A: Medium settings yield averages of 74 FPS at 4K, 137 FPS at 1440p, and 211 FPS at 1080p. The minimum FPS values at Medium are 63 at 4K, 116 at 1440p, and 180 at 1080p.

Q: Which resolution and settings combo provides the highest minimum frame rate?

A: The Medium preset at 1920x1080 has a minimum of 180 FPS, which is the highest minimum among all measured configurations.

Q: Is the 4K Ultra preset unplayable?

A: It is below the 60 FPS threshold at 51 FPS average, but it remains functional. The data indicates it is the only tested configuration that fails to reach the playable threshold.

Q: What is the frame rate difference between High and Ultra at 1440p?

A: High settings average 116 FPS, while Ultra settings average 95 FPS. This represents a 21 FPS reduction for the higher quality preset.

How This Combo Ranks

The combination of the AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 5060 ranks 1640 out of 3712 tested combinations in Doom. This places the pairing in the 44th percentile of all tested systems, meaning roughly 56 percent of tested combinations deliver higher frame rates in this game.

The ranking reflects a balance between the CPU's substantial compute capabilities and the GPU's mid-range positioning. The CPU sits in the 95th percentile among all tested processors, while the GPU ranks in the 72nd percentile among all tested graphics cards. The game's engine appears to leverage the GPU more heavily, as the overall combo ranking sits below both individual component percentiles.

Within the context of other tested combinations, this pairing achieves playable performance at all resolutions except 4K Ultra. The rank of 1640 suggests that many combinations with higher-end GPUs outperform this setup, particularly at 4K where the RTX 5060's 8 GB memory capacity and 128-bit bus width may limit performance. At 1080p and 1440p, the ranking is more competitive, with the high frame rates indicating that the CPU is not a bottleneck at these resolutions.

The Verdict

This PC can run Doom at playable frame rates across most tested configurations. At 3840x2160, the playable settings include High, Low, and Medium, with High being the best playable option at an average of 63 FPS. The Ultra preset at 4K falls short of the 60 FPS threshold with an average of 51 FPS.

At 2560x1440, all four tested settings clear the 60 FPS threshold. Ultra settings achieve 95 FPS, High reaches 116 FPS, Medium averages 137 FPS, and Low delivers 157 FPS. The best playable setting at 1440p is Ultra, providing the highest visual quality while maintaining a comfortable margin above the playable threshold.

At 1920x1080, every setting produces well over 60 FPS. The Ultra preset averages 146 FPS, High reaches 179 FPS, Medium delivers 211 FPS, and Low achieves 243 FPS. The best playable setting at 1080p is also Ultra, with the 146 FPS average providing significant headroom above the threshold.

The data confirms that this combination is fully capable of running Doom at playable frame rates for the majority of use cases. Users targeting 4K should select High settings for the best balance, while those at 1440p or 1080p can enable Ultra without concern.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 9 9950X3D are the AMD Ryzen 7 PRO 9755, which scores 75738 with a delta of 0.1 percent, and the AMD Ryzen 7 PRO 9755X3D at 75716 with a 0.1 percent delta. The AMD EPYC 8224P scores 75582 with a 0.3 percent delta, and the Intel Core Ultra 9 285 scores 75488 with a 0.4 percent delta. All four processors deliver nearly identical average benchmark scores, indicating that swapping to any of these would produce similar CPU-bound performance in Doom.

For the NVIDIA GeForce RTX 5060, the nearest rivals include the AMD Radeon 860M with a score of 26401 and a negative delta of 0.3 percent, the NVIDIA GeForce MX550 at 26421 with a negative delta of 0.3 percent, and the AMD Radeon RX 5700 XT 50th Anniversary at 26553 with a negative delta of 0.8 percent. The AMD Radeon RX 6750 XT scores 26011 with a positive delta of 1.2 percent. These rivals bracket the RTX 5060's performance closely, with the Radeon 860M and MX550 performing nearly identically and the RX 5700 XT 50th Anniversary slightly ahead.

Combining any of these CPU rivals with the RTX 5060 would yield frame rates within a fraction of a percent of the tested configuration. Similarly, pairing the Ryzen 9 9950X3D with any of the GPU rivals would produce results within roughly one percent of the measured data.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, which achieves an average of 63 FPS. Medium settings also clear the threshold at 74 FPS, but High offers superior visual quality while maintaining the minimum requirement.

At 2560x1440, the Ultra preset is the best choice, delivering an average of 95 FPS. This provides the highest visual quality while remaining 35 FPS above the playable threshold.

At 1920x1080, Ultra settings are again the best option, with an average of 146 FPS. This is 86 FPS above the playable threshold, offering substantial headroom for demanding scenes.

The optimal settings across resolutions follow a clear pattern: High at 4K, Ultra at 1440p, and Ultra at 1080p. The data shows that the 60 FPS threshold is exceeded by a wide margin at the two lower resolutions, while 4K requires a single-step reduction from the maximum preset.

CPU and GPU Roles

The performance scaling between resolutions indicates that the GPU is the primary bottleneck in this combination. At 4K Ultra, the average drops to 51 FPS, while the same settings at 1080p produce 146 FPS. This 95 FPS difference across a 4x resolution increase demonstrates significant GPU-bound scaling.

The CPU's role becomes more apparent at lower resolutions and settings. At 1080p Low, the average reaches 243 FPS, which is likely approaching the ceiling of what the game engine and CPU can sustain. The Ryzen 9 9950X3D's strong single-thread performance, evidenced by its 3DMark single-thread score of 1292 and Cinebench R23 single-core score of 2259, provides sufficient headroom for high frame rates at lower resolutions.

The medium preset data reveals the interaction between components. At 4K Medium, the minimum FPS is 63, matching the average of 4K High. This suggests that the GPU's memory bandwidth and compute capacity constrain performance at 4K, regardless of settings reductions. At 1440p, the scaling from Medium to Ultra costs 42 FPS, while at 1080p the same settings change costs 65 FPS, indicating that the GPU's workload becomes less dominant as resolution drops.

The 8 GB GDDR7 memory and 448.0 GB/s bandwidth of the RTX 5060 likely explain the 4K limitations, while the CPU's 128 MB L3 cache and high boost clock of 5.70 GHz support the strong low-resolution performance. Overall, the data indicates that GPU upgrades would provide the most benefit at 4K, while the CPU is sufficient for all tested scenarios.