Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
444 FPS
Ultra 1080p Measured
271 FPS

1440p (2K / QHD)

Low 1440p Measured
290 FPS
Ultra 1440p Measured
172 FPS

4K (Ultra HD)

Low 4K Measured
158 FPS
Ultra 4K Measured
94 FPS
3.1ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 75,779
Graphics Card
Required 27,325
Your GPU 60,347

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 94 117 135 158
1440p QHD 172 215 254 290
1080p Full HD 271 325 389 444

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 325
1920x1080 Low 444
1920x1080 Medium 389
1920x1080 Ultra 271
2560x1440 High 215
2560x1440 Low 290
2560x1440 Medium 254
2560x1440 Ultra 172
3840x2160 High 117
3840x2160 Low 158
3840x2160 Medium 135
3840x2160 Ultra 94

Performance Analysis: Doom on Your System

The AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 4090 combination delivers exceptionally high frame rates in Doom, with the measured data showing that every tested resolution and preset configuration clears the 60 FPS playable threshold by a substantial margin. Across the twelve measured FPS data points, the lowest average frame rate recorded is 93.9 FPS at 4K Ultra settings, while the highest reaches 443.8 FPS at 1080p Low settings, indicating that this hardware pairing is far more powerful than what the 2016-released FPS title requires for smooth gameplay.

Measured FPS Breakdown

The measured FPS data for this combination covers three resolutions—1920x1080, 2560x1440, and 3840x2160—each tested at four settings presets: Low, Medium, High, and Ultra. All figures are average FPS values, as the data does not include minimum or maximum frame time measurements. Starting at 1920x1080, the results show a clear progression from 443.8 FPS at Low settings, dropping to 389.3 FPS at Medium, then 325 FPS at High, and finally 270.8 FPS at Ultra. The gap between Low and Ultra at this resolution amounts to 173 FPS, which represents a 39% reduction in average frame rate when moving to the most demanding preset.

Moving to 2560x1440, the same pattern emerges with lower absolute numbers. Low settings produce 289.7 FPS, Medium delivers 253.8 FPS, High comes in at 214.8 FPS, and Ultra yields 171.8 FPS. The difference between Low and Ultra here is 117.9 FPS, which equates to a 40.7% drop. Notably, the 1440p Low result of 289.7 FPS is still higher than the 1080p Ultra result of 270.8 FPS, indicating that resolution scaling has a measurable but not overwhelming impact on performance at these high frame rates.

At 3840x2160, the performance remains exceptionally strong. Low settings produce 157.6 FPS, Medium reaches 135 FPS, High drops to 116.5 FPS, and Ultra settles at 93.9 FPS. The reduction from Low to Ultra at 4K is 63.7 FPS, a 40.4% decrease that closely mirrors the percentage drop seen at 1440p. The 4K Ultra figure of 93.9 FPS is the lowest average FPS recorded across the entire dataset, yet it still exceeds the 60 FPS playable threshold by more than 50%, demonstrating that even the most demanding configuration tested remains comfortably playable.

Examining the scaling between resolutions, going from 1080p to 1440p at the same settings reduces performance by roughly 35% across all presets. For example, High settings drop from 325 FPS to 214.8 FPS, a 33.9% reduction, while Ultra drops from 270.8 FPS to 171.8 FPS, a 36.6% reduction. The transition from 1440p to 4K produces an even larger impact, with High falling from 214.8 FPS to 116.5 FPS (45.8% reduction) and Ultra falling from 171.8 FPS to 93.9 FPS (45.3% reduction). This suggests that the 4K resolution places significantly more load on the rendering pipeline than 1440p does, though the absolute frame rates remain very high regardless.

How This Combo Ranks

The benchmark database places this CPU-GPU combination at rank 78 out of 3,712 tested combos for Doom, placing it in the top 2.1% of all configurations evaluated. This ranking reflects the measured performance data, which shows average frame rates exceeding 90 FPS even at the most demanding 4K Ultra settings. The percentile position indicates that only 77 other hardware combinations in the database achieve higher performance in this specific game, a remarkable achievement given that the RTX 4090 is listed as end-of-life and the Ryzen 9 9950X3D was released in January 2025.

The high rank is consistent with the raw performance numbers. At 1080p, the combination produces frame rates in the 270-444 FPS range depending on settings, which places it far above the needs of typical 60 Hz or 144 Hz displays. Even at 4K, the lowest measured average of 93.9 FPS at Ultra settings would rank among the top configurations for this title, as most systems struggle to maintain 60 FPS at that resolution in demanding games. The data shows that this combo is not merely playable but overwhelmingly overqualified for Doom, with headroom to spare even for high-refresh-rate 4K monitors.

Comparing the rank to the individual component percentiles provides additional context. The CPU holds a 95th percentile ranking among all CPUs based on its average benchmark score of 75,779, while the GPU sits at the 88th percentile among all GPUs with an average benchmark score of 60,347. The game-specific rank of 78 out of 3,712 (roughly the 97.9th percentile) is higher than either component’s standalone percentile, indicating that this particular pairing synergizes well in Doom’s engine or that the game is not particularly demanding on either component.

CPU and GPU Roles

The measured FPS data across resolutions and presets reveals how the CPU and GPU share the workload in Doom. At 1080p, the performance difference between Low and Ultra settings is 173 FPS (from 443.8 to 270.8), which is a 39% reduction. This relatively modest drop suggests that at lower resolutions, the CPU has sufficient headroom to feed the GPU even at Ultra settings, and the frame rate is primarily limited by the GPU’s rendering speed. However, the absolute numbers—443.8 FPS at Low—indicate that the Ryzen 9 9950X3D’s 16 cores and 32 threads are more than capable of driving the RTX 4090 to its limits in this title.

As resolution increases to 1440p, the performance drop from Low to Ultra becomes 117.9 FPS (from 289.7 to 171.8), a 40.7% reduction. The fact that this percentage is nearly identical to the 1080p drop suggests that the GPU is becoming the limiting factor, as the increased pixel count places more pressure on the rendering pipeline. The CPU’s role diminishes relative to the GPU at higher resolutions, since the per-frame work for the CPU (draw calls, physics, game logic) remains roughly constant while the GPU must process significantly more pixels.

At 4K, the Low to Ultra drop is 63.7 FPS (from 157.6 to 93.9), again a 40.4% reduction. This consistent percentage reduction across all three resolutions—39%, 40.7%, and 40.4%—strongly indicates that the GPU is the dominant performance determinant at all tested settings and resolutions. The CPU’s influence is visible primarily in the absolute frame rates: even at 4K Low, the system achieves 157.6 FPS, which would not be possible if the CPU were bottlenecking the GPU. The scaling between resolutions—roughly 35% reduction from 1080p to 1440p and 45% from 1440p to 4K at the same settings—confirms that the GPU workload scales predictably with pixel count, while the CPU maintains its performance regardless of resolution.

The data does not include separate CPU-only or GPU-only benchmarks for Doom, but the consistent percentage drops across presets and the high absolute frame rates point to a balanced system where the GPU becomes the primary limiter as resolution increases. At 1080p, the CPU’s strong single-thread performance (3dmark_single_thread score of 1,292 and passmark_single_thread of 4,737) likely helps sustain the very high frame rates, while at 4K, the GPU’s 82.58 TFLOPS FP32 compute and 1.01 TB/s memory bandwidth are the key drivers.

Similar Performance Alternatives

The nearestRivals data for the CPU and GPU provides context for what other hardware would perform similarly in this combination. For the AMD Ryzen 9 9950X3D, the closest rival is the AMD Ryzen 7 PRO 9755 with an average benchmark score of 75,738, which is just 0.1% lower than the 9950X3D’s 75,779. The AMD Ryzen 7 PRO 9755X3D scores 75,716 (0.1% delta), the AMD EPYC 8224P scores 75,582 (0.3% delta), and the Intel Core Ultra 9 285 scores 75,488 (0.4% delta). These four alternatives are all within 0.4% of the 9950X3D’s average score, meaning that swapping in any of them would produce nearly identical frame rates in Doom, since the game does not appear to be CPU-bound at the tested settings.

For the NVIDIA GeForce RTX 4090, the nearestRivals list is more varied. The Intel Arc Pro A60 has an average score of 60,326, a 0% delta from the RTX 4090’s 60,347. The AMD Radeon Pro Vega 48 scores 60,140 (0.3% delta), the AMD Radeon Pro W6600M scores 61,896 (-2.5% delta, meaning it is actually 2.5% higher), and the AMD Radeon PRO V710 scores 58,657 (2.9% delta, meaning it is 2.9% lower). These rivals are based on average benchmark scores, not Doom-specific performance, so their in-game FPS may differ slightly due to driver optimizations or architecture-specific features, but the overall performance class is similar.

In practice, a system with the Ryzen 9 9950X3D paired with any of these GPU alternatives would likely produce frame rates within a few percent of the measured values, provided the GPU does not become the bottleneck. Given that the RTX 4090’s nearest rivals are all within a 2.9% delta, the 4K Ultra result of 93.9 FPS could plausibly drop to around 91 FPS with the Radeon PRO V710 or rise to about 96 FPS with the Radeon Pro W6600M, assuming linear scaling. At 1080p, where the GPU is less stressed, the differences would be even smaller.

Best Settings per Resolution

The verdictByResolution data indicates that all four settings presets—Low, Medium, High, and Ultra—are playable at every resolution, since all measured average FPS values exceed the 60 FPS playable threshold. The best settings, defined as the most demanding preset that stays at or above 60 FPS, is therefore Ultra at all three resolutions. At 3840x2160, Ultra produces an average of 93.9 FPS, which is 33.9 FPS above the 60 FPS threshold. At 2560x1440, Ultra delivers 171.8 FPS, and at 1920x1080, Ultra reaches 270.8 FPS.

For users who prioritize maximum visual fidelity, the data supports running Ultra settings at any resolution. The 4K Ultra figure of 93.9 FPS is particularly notable because it means the system can drive a 4K display at near-100 FPS with all settings maximized, which is rare for most games even with top-tier hardware. If a user prefers higher refresh rates over maximum quality, they could drop to High settings at 4K to gain 22.6 FPS (from 93.9 to 116.5), or to Medium for 41.1 FPS more (135 FPS), or to Low for 63.7 FPS more (157.6 FPS). However, the data shows that even Ultra at 4K provides a smooth experience by any reasonable standard.

At 1440p and 1080p, the frame rates at Ultra are so high that they exceed the refresh rate of most gaming monitors (typically 144 Hz or 240 Hz). The 1440p Ultra result of 171.8 FPS would saturate a 144 Hz display, while 1080p Ultra at 270.8 FPS would require a 240 Hz or faster monitor to fully utilize. For competitive play where frame rate matters most, the Low presets at 1080p (443.8 FPS) or 1440p (289.7 FPS) offer the highest possible frame rates, though the visual quality trade-off is substantial.

The Verdict

This PC can absolutely run Doom, and the data shows it does so with extraordinary headroom. The verdictByResolution data lists all four settings presets as playable at each of the three tested resolutions, meaning every configuration from 1080p Low to 4K Ultra maintains an average FPS above the 60 FPS playable threshold. The weakest performance point in the entire dataset is 4K Ultra at 93.9 FPS, which is still 56.5% above the playable threshold. At 1440p, the minimum average FPS is 171.8 (Ultra), and at 1080p, it is 270.8 (Ultra).

For a 4K display, users can run Ultra settings and enjoy an average of 93.9 FPS, or choose High for 116.5 FPS, Medium for 135 FPS, or Low for 157.6 FPS. For 1440p displays, Ultra provides 171.8 FPS, which is more than enough for high-refresh-rate gaming. For 1080p displays, even the most demanding preset produces 270.8 FPS, and the Low preset reaches 443.8 FPS, which would only be fully utilized by extremely high-refresh-rate monitors. The combination of the Ryzen 9 9950X3D and RTX 4090 is, for practical purposes, never the limiting factor in this game—the display’s refresh rate and the user’s settings preferences will determine the experience, not the hardware’s capability.

FAQ

Q: What is the highest average FPS this combination achieves in Doom?

A: The highest average FPS recorded is 443.8 FPS at 1920x1080 resolution with Low settings. The next highest is 389.3 FPS at 1080p Medium, followed by 325 FPS at 1080p High.

Q: Can this system run Doom at 4K Ultra settings with playable frame rates?

A: Yes, the measured average FPS at 3840x2160 with Ultra settings is 93.9 FPS, which is well above the 60 FPS playable threshold. All four settings presets at 4K—Low, Medium, High, and Ultra—produce average frame rates above 60 FPS.

Q: How does the performance at 1440p compare to 1080p?

A: At 1440p, the average FPS ranges from 171.8 (Ultra) to 289.7 (Low), while at 1080p, the range is 270.8 (Ultra) to 443.8 (Low). The reduction from 1080p to 1440p is approximately 35% across all settings, meaning 1440p performance is roughly two-thirds of 1080p performance.

Q: Which component has a higher percentile ranking compared to other parts?

A: The AMD Ryzen 9 9950X3D holds the 95th percentile among all CPUs, while the NVIDIA GeForce RTX 4090 holds the 88th percentile among all GPUs. The CPU’s average benchmark score is 75,779, and the GPU’s is 60,347.

Q: What settings preset provides the best balance of visual quality and frame rate at 4K?

A: The data shows that Ultra settings at 4K produce an average of 93.9 FPS, which is the most demanding preset and still well above the 60 FPS threshold. If higher frame rates are desired, dropping to High yields 116.5 FPS, Medium yields 135 FPS, and Low yields 157.6 FPS.

Q: Are there any settings or resolutions where the frame rate drops below 60 FPS?

A: No. Across all twelve measured configurations (three resolutions multiplied by four settings presets), the lowest average FPS is 93.9 FPS at 4K Ultra. Every other configuration produces higher average frame rates, with the highest being 443.8 FPS at 1080p Low.