Instant compatibility check with FPS benchmarks and optimization tips
Doom
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 37 | 45 | 53 | 61 |
| 1440p QHD | 68 | 83 | 99 | 113 |
| 1080p Full HD | 105 | 129 | 152 | 175 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Doom on Your System
Similar Performance Alternatives
The CPU and GPU in this combination each sit near specific comparison points in the database. Starting with the AMD Ryzen 9 9900X3D, its average benchmark score of 54,762 places it just 0.6% behind the Intel Core Ultra 5 245KF, which scores 55,093. The margin is narrow enough that in most workloads these two processors would be effectively interchangeable. The Intel Core Ultra 5 245K trails by 1.3% with a score of 54,053, while the Intel Xeon 6505P sits 2% behind at 53,701. The Intel Core i7-14700F rounds out the nearest rivals at 53,620, a 2.1% gap. These four processors form a tight cluster around the 9900X3D, meaning any of them would produce nearly identical frame pacing in CPU-bound scenarios.
The NVIDIA GeForce RTX 2060 shows a different pattern. Its average score of 15,290 is essentially tied with the NVIDIA GeForce GTX 580 at 15,283, a 0% delta. The AMD Radeon 680M integrated graphics score 15,270, just 0.1% behind. The NVIDIA GeForce RTX 3050 OEM and AMD Radeon RX 7600 follow at 15,199 and 15,171 respectively, representing 0.6% and 0.8% gaps. For Doom, a game released in 2016, the RTX 2060's Turing architecture with its 30 ray tracing cores and 240 tensor cores provides features that the nearest rivals lack, but raw rasterization performance sits in the same bandwidth as these alternatives. The practical takeaway: swapping the RTX 2060 for any of these near-equal GPUs would not meaningfully change the frame rates discussed below.
CPU and GPU Roles
Doom's engine scaling behavior becomes clear when examining the FPS deltas across resolutions and presets. At 1920x1080 with Low settings, the combo produces 175 FPS average. Moving to Medium drops to 152 FPS, a 13% reduction. High settings yield 129 FPS, and Ultra settles at 105 FPS. The GPU is the primary constraint here, as the 9900X3D's single-thread score of 1,269 in 3DMark and Cinebench R23 single-core score of 6,739 are far beyond what Doom's engine requires for its physics and game logic at these frame rates.
At 2560x1440, the pattern shifts. Low settings deliver 113 FPS, Medium drops to 99 FPS, High produces 83 FPS, and Ultra reaches 68 FPS. The scaling from 1080p to 1440p at the same preset shows a 35% reduction at Low (175 to 113), a 35% reduction at Medium (152 to 99), a 36% reduction at High (129 to 83), and a 35% reduction at Ultra (105 to 68). This consistent 35% drop across all presets indicates that resolution scaling is purely GPU-bound; the CPU's role does not change with resolution because the frame rate reduction is uniform.
At 3840x2160, the GPU becomes decisively limiting. Low settings produce 61 FPS, Medium drops to 53 FPS, High to 45 FPS, and Ultra to 37 FPS. The 4K to 1440p scaling shows a 46% reduction at Low (113 to 61), a 46% reduction at Medium (99 to 53), a 46% reduction at High (83 to 45), and a 46% reduction at Ultra (68 to 37). The identical 46% scaling again confirms that the CPU contributes nothing to the bottleneck at 4K. The 9900X3D's 12 cores and 24 threads, with a Cinebench R23 multi-core score of 47,737, are effectively idle headroom for this title. Doom is a 2016 release that cannot utilize the CPU's full throughput, so the RTX 2060 defines performance at every resolution.
How This Combo Ranks
The database records this specific CPU-GPU pairing at rank 2,934 out of 3,712 tested combinations for Doom. That places it in the 21st percentile of all combos, meaning roughly 79% of tested pairings perform better. This ranking reflects the GPU's age more than the CPU's capability. The RTX 2060, released in 2019, sits at the 58th percentile among all GPUs in the database. The 9900X3D, released in 2025, ranks at the 91st percentile among all CPUs. The pairing therefore underperforms what the CPU alone would suggest, because the GPU becomes the ceiling.
The rank of 2,934 indicates that while this combo can play Doom, it does so at frame rates that many other pairings exceed. However, the measured FPS data shows the game is fully playable at 1080p and 1440p, with only 4K Ultra falling below the 60 FPS threshold. The rank is a relative measure across all tested hardware; the absolute performance is sufficient for the game's demands at most settings.
The Verdict
This PC can run Doom. The verdict by resolution is unambiguous. At 1920x1080, all four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold, with Ultra averaging 105 FPS. At 2560x1440, all four presets also clear 60 FPS, with Ultra averaging 68 FPS. At 3840x2160, only Low settings clear 60 FPS, averaging 61 FPS. Medium falls to 53 FPS, High to 45 FPS, and Ultra to 37 FPS.
For a 1080p or 1440p display, this combination delivers smooth gameplay at maximum settings. For 4K, the user must drop to Low settings to maintain 60 FPS, or accept frame rates below the playable threshold at higher presets. The recorded data shows no min or max FPS values for most presets, but the Medium preset at each resolution includes them: at 1080p Medium, the range is 130 to 175 FPS; at 1440p Medium, 84 to 113 FPS; at 4K Medium, 45 to 61 FPS. The minimum frames at 4K Medium dip below 60, reinforcing that 4K requires Low settings for a consistent experience.
Measured FPS Breakdown
At 1920x1080, the full preset ladder is recorded. Low settings average 175 FPS. Medium settings average 152 FPS with a minimum of 130 FPS and a maximum of 175 FPS. High settings average 129 FPS. Ultra settings average 105 FPS. The gap between Low and Ultra is 70 FPS, a 40% reduction, which reflects the GPU load increase from the engine's higher-quality rendering features.
At 2560x1440, Low averages 113 FPS. Medium averages 99 FPS with a minimum of 84 FPS and a maximum of 113 FPS. High averages 83 FPS. Ultra averages 68 FPS. The spread from Low to Ultra is 45 FPS, a 40% reduction, matching the 1080p scaling pattern closely.
At 3840x2160, Low averages 61 FPS. Medium averages 53 FPS with a minimum of 45 FPS and a maximum of 61 FPS. High averages 45 FPS. Ultra averages 37 FPS. The Low to Ultra spread is 24 FPS, a 39% reduction. The 4K Medium minimum of 45 FPS is notable: even the average of 53 FPS sits below the 60 FPS playable threshold, and the minimum is substantially lower. This indicates frame timing variance at 4K that does not appear at lower resolutions, where minimums stay comfortably above 60 FPS.
FAQ
Q: Can this system run Doom at 60 FPS on a 1080p display?
A: Yes. All four presets at 1920x1080 exceed 60 FPS. Ultra settings average 105 FPS, and Medium averages 152 FPS with a minimum of 130 FPS.
Q: What is the best settings preset at 1440p?
A: Ultra settings at 2560x1440 average 68 FPS, which clears the 60 FPS threshold. This is the most demanding preset that remains playable.
Q: Is 4K playable with this combination?
A: Only at Low settings, which average 61 FPS. Medium drops to 53 FPS average with a minimum of 45 FPS, High averages 45 FPS, and Ultra averages 37 FPS.
Q: How does the RTX 2060 compare to its nearest rivals?
A: The RTX 2060 scores 15,290 on average, essentially tied with the GTX 580 at 15,283 (0% delta), 0.1% ahead of the AMD Radeon 680M, 0.6% ahead of the RTX 3050 OEM, and 0.8% ahead of the RX 7600.
Q: How does the Ryzen 9 9900X3D compare to nearby CPUs?
A: It is 0.6% behind the Intel Core Ultra 5 245KF, 1.3% ahead of the Intel Core Ultra 5 245K, 2% ahead of the Intel Xeon 6505P, and 2.1% ahead of the Intel Core i7-14700F in average benchmark scores.
Q: Does the CPU or GPU limit performance in Doom?
A: The GPU. Resolution scaling shows uniform frame rate reductions of 35% from 1080p to 1440p and 46% from 1440p to 4K across all presets, indicating the CPU is never the bottleneck.
Best Settings per Resolution
At 1920x1080, the best settings preset is Ultra, which averages 105 FPS. This is the most demanding preset that stays at or above 60 FPS, and it does so with a large margin. The next step down, High, averages 129 FPS, but Ultra is fully playable.
At 2560x1440, Ultra is again the best preset, averaging 68 FPS. This clears the 60 FPS threshold by a smaller margin than at 1080p, but it remains comfortably playable. The minimum FPS for Medium at this resolution is 84 FPS, and Ultra's average of 68 FPS suggests its minimum would sit near or above 60 FPS.
At 3840x2160, Low is the only playable preset, averaging 61 FPS. This is a narrow margin above the 60 FPS threshold, and the Medium preset's minimum of 45 FPS at this resolution suggests that Low's minimum may dip close to 60 FPS during demanding scenes. Users seeking higher visual quality at 4K would need to accept frame rates below 60 FPS, as Medium averages 53 FPS and Ultra averages 37 FPS.