Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
364 FPS
Ultra 1080p Measured
292 FPS

1440p (2K / QHD)

Low 1440p Measured
314 FPS
Ultra 1440p Measured
189 FPS

4K (Ultra HD)

Low 4K Measured
170 FPS
Ultra 4K Measured
102 FPS
3.1ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 51,947
Graphics Card
Required 27,325
Your GPU 77,712

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 102 125 148 170
1440p QHD 189 231 273 314
1080p Full HD 292 327 347 364

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 327
1920x1080 Low 364
1920x1080 Medium 347
1920x1080 Ultra 292
2560x1440 High 231
2560x1440 Low 314
2560x1440 Medium 273
2560x1440 Ultra 189
3840x2160 High 125
3840x2160 Low 170
3840x2160 Medium 148
3840x2160 Ultra 102

Performance Analysis: Doom on Your System

The AMD Ryzen 9 5950X and NVIDIA GeForce RTX 5090 D combination produces extraordinarily high frame rates in Doom (2016), with every tested setting at every resolution clearing the 60 FPS playability threshold by a wide margin. The data shows this is a pairing that utterly overwhelms the game’s engine, delivering performance that ranges from a low of 102 FPS at 4K Ultra to a high of 364 FPS at 1080p Low.

Measured FPS Breakdown

The measured FPS data for this combo covers three resolutions and four quality presets, with average frame rates that consistently rank among the highest seen in the benchmark database. At 1920x1080, the average FPS ranges from 292 on Ultra to 364 on Low, with the Medium preset hitting 347 FPS average. The High preset at 1080p delivers 327 FPS. Notably, the only frame time data with minimum and maximum values comes from the Medium preset at 1080p, which shows a minimum of 295 FPS and a maximum of 399 FPS, indicating remarkably stable performance with a narrow 104 FPS band between floor and ceiling.

Moving to 2560x1440, the averages remain extremely high, though they scale down predictably with the increased pixel count. The Low preset yields 314 FPS, High produces 231 FPS, Medium achieves 273 FPS, and Ultra settles at 189 FPS. The Medium preset at 1440p again provides the only min/max data in that resolution, with a minimum of 232 FPS and a maximum of 314 FPS. The 82 FPS spread between minimum and maximum suggests the engine is still well within its comfort zone, with no noticeable frame pacing issues.

At 3840x2160, the performance is still far beyond what the game requires, even at the most demanding settings. Low produces 170 FPS, Medium delivers 148 FPS, High reaches 125 FPS, and Ultra drops to 102 FPS. The Medium preset at 4K shows a minimum of 126 FPS and a maximum of 170 FPS, creating a 44 FPS range that demonstrates how the GPU’s immense bandwidth and compute resources keep frame times consistent even at 8.3 million pixels. The step-down from 1440p to 4K costs roughly 40-45% of the average frame rate depending on the preset, which is a typical scaling factor for a game with this era’s rendering complexity.

The data reveals that the RTX 5090 D’s raw rasterization power is the dominant factor here, as even the Ryzen 9 5950X’s 16-core, 32-thread Zen 3 architecture is not the bottleneck at any resolution. The CPU’s single-thread score of 944 in 3DMark and 1614 in Cinebench R23 single-core are more than sufficient for Doom’s id Tech 6 engine, which scales well across multiple threads but does not require the massive parallel throughput that newer titles demand.

FAQ

*Q: Can this PC run Doom at 4K Ultra settings?*

A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 102 FPS, which is 70% above the 60 FPS playability threshold. The verdict data confirms that Ultra is the best playable setting at this resolution.

Q: What is the highest average FPS this combo achieves?

A: The highest average FPS recorded is 364 at 1920x1080 with Low settings. The Medium preset at 1080p comes close at 347 FPS, and the High preset reaches 327 FPS.

Q: How does the RTX 5090 D compare to its nearest GPU rivals in overall benchmark scores?

A: The RTX 5090 D’s average benchmark score is 77712. It sits 1.1% above the AMD Radeon RX 6650M XT (76904), 1.6% below the AMD Radeon RX 6850M XT (78940), and 2.1-2.4% below the NVIDIA Tesla P100 variants (79396 and 79605). These are close margins, though the RTX 5090 D’s 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are far beyond what those rivals offer.

Q: Is the Ryzen 9 5950X a bottleneck for this game?

A: The benchmark results indicate no CPU bottleneck. The CPU’s 3DMark max-threads score of 11597 and Cinebench R23 multicore score of 26017 provide ample headroom, and the measured FPS scales smoothly across resolutions, which is typical of GPU-bound scenarios. The CPU’s 91st percentile ranking versus all CPUs supports this.

Q: What frame rates can I expect at 1440p with High settings?

A: The measured average FPS at 2560x1440 with High settings is 231 FPS. This is nearly four times the 60 FPS playability threshold, so the experience will be exceptionally smooth on any high-refresh-rate monitor.

*Q: Does the combo’s rank in the database reflect its Doom performance?*

A: The combo ranks 69th out of 3712 tested combinations in Doom specifically. This top-2% placement confirms that the pairing of this CPU and GPU is near the very top of the database for this game, despite the CPU’s and GPU’s individual percentile rankings of 91 and 92 respectively.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 9 5950X in overall CPU benchmark scores are a mix of Intel and AMD parts. The Intel Core Ultra 5 235HX scores 52073, which is just 0.2% above the Ryzen’s 51947 average. The AMD EPYC 8124P scores 52121, a 0.3% difference, while the Intel Core i9-13900F scores 51730, putting it 0.4% below. The Intel Core i7-14700 scores 52301, which is 0.7% higher than the Ryzen. In practical terms for Doom, any of these CPUs would deliver nearly identical frame rates when paired with the same GPU, as the game’s engine does not stress even mid-range modern processors to their limits.

For the NVIDIA GeForce RTX 5090 D, the nearest GPU rivals are somewhat surprising given the massive specification gap. The AMD Radeon RX 6650M XT scores 76904, just 1.1% below the RTX 5090 D’s 77712. The AMD Radeon RX 6850M XT scores 78940, which is 1.6% higher. The NVIDIA Tesla P100 PCIe 12 GB and 16 GB variants score 79396 and 79605 respectively, representing 2.1% and 2.4% margins over the RTX 5090 D. These deltaPct values are small enough that in a game like Doom, the user-visible performance difference would be negligible, though the RTX 5090 D’s enormous memory bandwidth and 104.8 TFLOPS of FP32 compute would show advantages in more modern, demanding titles.

For a builder considering alternatives, the data suggests that swapping the Ryzen 9 5950X for any of its four nearest rivals would produce no meaningful change in Doom frame rates. Similarly, choosing any of the RTX 5090 D’s nearest GPU rivals would keep average FPS within a few percentage points, though the 32 GB VRAM buffer of the RTX 5090 D is unique among this group.

How This Combo Ranks

The combination of the AMD Ryzen 9 5950X and NVIDIA GeForce RTX 5090 D ranks 69th out of 3712 tested combos for Doom. This places the pairing in the top 1.9% of all configurations in the database, which is consistent with the measured frame rates. The 60 FPS playability threshold is exceeded by at least 42 FPS even in the worst-case scenario of 4K Ultra, where the average drops to 102 FPS.

The rank of 69 is notable because it is lower than the individual component percentile rankings might suggest. The CPU’s 91st percentile and GPU’s 92nd percentile versus all parts in their categories would imply a combo rank closer to the top 10, but the actual game-specific rank of 69 out of 3712 indicates that there are 68 other CPU+GPU pairings that achieve higher average FPS in Doom. This is likely due to the fact that Doom is an older title that does not fully utilize the RTX 5090 D’s Blackwell architecture features, and some combinations with faster single-threaded CPUs or higher boost clocks may edge out this pairing in raw frame rate.

The data shows that the combo’s performance is far beyond what the game requires, so the rank difference between 69th and, say, 20th would be imperceptible in actual gameplay. The frame rates are already so high that they exceed the refresh rate capabilities of most monitors, making any additional performance moot.

The Verdict

This PC can absolutely run Doom at maximum settings across all tested resolutions. The verdict data lists every setting — High, Low, Medium, and Ultra — as playable at 3840x2160, 2560x1440, and 1920x1080. The best settings at each resolution are Ultra, with average FPS of 102 at 4K, 189 at 1440p, and 292 at 1080p.

The 60 FPS playability threshold is cleared with enormous headroom. At 4K Ultra, the combo runs at 170% of the threshold. At 1440p Ultra, it runs at 315% of the threshold. At 1080p Ultra, it runs at 487% of the threshold. These margins mean that even with significant background tasks, driver overhead, or streaming software running, the frame rate would not drop below 60 FPS. The minimum recorded FPS across all data points is 126 at 4K Medium, which is still more than double the playability threshold.

For a game released in 2016, this hardware is extreme overkill. The Ryzen 9 5950X’s 16 cores and 32 threads are far beyond what Doom requires, and the RTX 5090 D’s 32 GB of GDDR7 memory and 104.8 TFLOPS of compute are similarly excessive. The performance ceiling is effectively unbounded, limited only by the monitor’s refresh rate rather than the hardware’s capabilities.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which achieves an average of 292 FPS. The Low preset produces 364 FPS, Medium produces 347 FPS, and High produces 327 FPS. All four presets are playable, but Ultra is the recommended choice for maximum visual quality without sacrificing performance.

At 2560x1440, Ultra is again the best settings choice, with an average of 189 FPS. The High preset delivers 231 FPS, Medium delivers 273 FPS, and Low delivers 314 FPS. The gap between Ultra and Low at this resolution is 125 FPS, which is substantial, but the Ultra preset’s 189 FPS average still provides a buttery-smooth experience on any 144Hz or 165Hz monitor.

At 3840x2160, Ultra remains the best settings option, with an average of 102 FPS. High produces 125 FPS, Medium produces 148 FPS, and Low produces 170 FPS. The 102 FPS at Ultra is comfortably above the 60 FPS threshold and is within the range of what a high-end 4K 120Hz display can take advantage of. The medium preset’s minimum of 126 FPS shows that even the worst frame times at this resolution are more than double the playability threshold, so there is no risk of stutter or hitching under any circumstances.