Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

86%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
202 FPS
Ultra 1080p Measured
122 FPS

1440p (2K / QHD)

Low 1440p Measured
131 FPS
Ultra 1440p Measured
79 FPS

4K (Ultra HD)

Low 4K Measured
71 FPS
Ultra 4K Measured
43 FPS
6.7ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 37,943
Graphics Card
Required 27,325
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 43 52 62 71
1440p QHD 79 96 114 131
1080p Full HD 122 149 176 202

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 149
1920x1080 Low 202
1920x1080 Medium 176
1920x1080 Ultra 122
2560x1440 High 96
2560x1440 Low 131
2560x1440 Medium 114
2560x1440 Ultra 79
3840x2160 High 52
3840x2160 Low 71
3840x2160 Medium 62
3840x2160 Ultra 43

Performance Analysis: Doom on Your System

AMD Ryzen 7 9700X and NVIDIA GeForce RTX 5050 form a mid-range pairing that delivers a thoroughly playable experience in Doom, but the data reveals sharp limits at higher resolutions. The combo ranks 2281 out of 3712 tested combinations, placing it in the lower-middle tier of the benchmark database. This percentile position is largely dictated by the GPU’s standing; the RTX 5050 sits at the 66th percentile among all GPUs, while the Ryzen 7 9700X ranks much higher at the 86th percentile among CPUs. The asymmetry suggests the graphics card is the limiting factor for pushing frame rates, a pattern that becomes clearer when examining performance scaling across resolutions.

How This Combo Ranks

The combination of AMD Ryzen 7 9700X and NVIDIA GeForce RTX 5050 achieves a rank of 2281 out of 3712 tested combos for Doom. This places it in the 61st percentile of all tested systems, meaning roughly 61% of configurations perform better and 39% perform worse. The ranking is heavily weighted toward GPU performance, as the RTX 5050’s 66th percentile standing among all GPUs drags the overall result down from what the CPU alone would suggest. The Ryzen 7 9700X, with an average benchmark score of 37943, sits at the 86th percentile among all CPUs, indicating the processor is far more capable than the graphics card in this pairing.

The delta between CPU and GPU capability is stark. The Ryzen 7 9700X’s nearest rivals include the Intel Core i9-14901E with an average score of 37911 (0.1% difference) and the AMD Ryzen AI 9 HX 370 at 37904 (0.1% difference). These scores are nearly identical, confirming the 9700X is a well-established performer. Meanwhile, the RTX 5050’s nearest rivals show more variance: the AMD Radeon RX Vega M GL scores 21153 (-0.6% delta), the AMD Radeon HD 8970M scores 21237 (-1% delta), and the AMD Radeon RX 5600 XT scores 20713 (1.6% delta). The GPU’s average benchmark score of 21035 places it just above the RX 5600 XT but below the older HD 8970M, highlighting that the RTX 5050 is not a high-end part despite its modern architecture.

This ranking means the combo will handle Doom smoothly at 1080p and 1440p but will struggle to maintain 60 FPS at 4K on higher presets. The data confirms the system is balanced toward 1440p gaming, where it can max out settings, rather than 4K, where it requires compromises.

CPU and GPU Roles

The benchmark data reveals a clear division of labor between the Ryzen 7 9700X and the RTX 5050. At 1080p, the CPU has ample headroom; the system achieves 202 FPS on Low settings and 149 FPS on High settings, with the gap between presets indicating the GPU is the primary constraint even at this resolution. The CPU’s 8 cores and 16 threads, combined with a boost clock of 5.50 GHz, are more than sufficient for Doom’s engine, which is known for being well-optimized. The processor’s single-thread score of 4654 in Passmark and 3DMark single-thread score of 1280 suggest it can feed frames to the GPU without bottlenecking.

As resolution increases, the GPU’s role becomes more dominant. Moving from 1080p to 1440p, average FPS drops by roughly 35-40% across all settings: High falls from 149 to 96 FPS, Low from 202 to 131 FPS, Medium from 176 to 114 FPS, and Ultra from 122 to 79 FPS. This scaling is consistent with a GPU-bound scenario, where the RTX 5050’s 320.0 GB/s memory bandwidth and 13.17 TFLOPS FP32 performance are the limiting factors. The CPU’s performance remains relatively constant, as evidenced by its strong multi-threaded scores like Cinebench R23 multi-core at 20485, which do not need to scale with resolution.

At 4K, the GPU becomes the absolute bottleneck. The system drops to 52 FPS on High, 62 FPS on Medium, and 43 FPS on Ultra, with only Low settings clearing 60 FPS at 71 FPS. The RTX 5050’s 8 GB of GDDR6 memory on a 128-bit bus is insufficient for 4K textures and high-detail rendering, causing the sharp performance cliff. The CPU’s influence is negligible at this resolution; even a much stronger GPU would be needed to maintain playable frame rates, as the 9700X is already delivering far more compute headroom than the 5050 can utilize.

Measured FPS Breakdown

The measured FPS data provides a comprehensive picture of performance across three resolutions and four quality presets. At 1920x1080, the combo delivers excellent results across the board. Low settings produce an average of 202 FPS, Medium averages 176 FPS with a minimum of 150 and maximum of 203, High averages 149 FPS, and Ultra averages 122 FPS. All presets comfortably exceed the 60 FPS playable threshold, with even the most demanding Ultra setting maintaining a 2x margin over the threshold.

At 2560x1440, performance remains strong but begins to show the GPU’s limits. Low settings average 131 FPS, Medium averages 114 FPS with a range of 97 to 131, High averages 96 FPS, and Ultra averages 79 FPS. The delta between Low and Ultra is 52 FPS, indicating that the RTX 5050’s shading units (2560) and ROPs (32) are being stressed by higher-quality settings. Every preset still clears 60 FPS, making 1440p the sweet spot for this combination.

The 3840x2160 results tell a different story. Low settings average 71 FPS, barely clearing the playable threshold. Medium averages 62 FPS with a minimum of 52 and maximum of 71, which is right at the edge of playability. High drops to 52 FPS, and Ultra falls to 43 FPS, both below the 60 FPS threshold. The frame time consistency also degrades at 4K, as evidenced by the Medium preset’s minimum of 52 FPS, which is 10 FPS below the average. This suggests micro-stuttering or demanding scenes that push the GPU to its limits.

Similar Performance Alternatives

For the RTX 5050, the nearest performance rivals in the database are a mix of older and newer parts. The AMD Radeon RX Vega M GL scores 21153, which is 0.6% higher than the RTX 5050’s 21035 average. The AMD Radeon HD 8970M scores 21237, 1% higher, while the NVIDIA RTX A4000 Mobile scores 21379, 1.6% higher. The AMD Radeon RX 5600 XT scores 20713, which is 1.6% lower. These deltas are all within 2%, meaning any of these GPUs would deliver nearly identical frame rates in Doom at the same settings. A system with the RX 5600 XT, for instance, would produce within 1-2 FPS of the RTX 5050’s results across all tested presets.

On the CPU side, the Ryzen 7 9700X’s nearest rivals are all within 0.4% of its average score. The Intel Core i9-14901E (37911), AMD Ryzen AI 9 HX 370 (37904), Intel Core 5 211E (37829), and AMD Ryzen AI Embedded P132 (37804) all perform statistically identically to the 9700X. In Doom, which is not heavily CPU-threaded, swapping the 9700X for any of these processors would result in no measurable FPS difference, as the GPU remains the bottleneck at all resolutions above 1080p.

For users considering alternatives, the practical implication is that GPU choice matters far more than CPU for Doom. A system with a weaker CPU but the same RTX 5050 would see nearly identical frame rates, while a system with a stronger GPU but the same CPU would see significant improvements, particularly at 4K.

FAQ

Q: Can this PC run Doom at 60 FPS on 1080p Ultra settings?

A: Yes. The measured average FPS at 1920x1080 Ultra is 122 FPS, which is more than double the 60 FPS playable threshold. Even the minimum FPS at Medium settings (150 FPS) exceeds the threshold.

Q: What is the best settings preset for 4K gaming with this combo?

A: The verdict data indicates Medium is the best playable setting at 3840x2160, with an average FPS of 62. Low settings also clear the threshold at 71 FPS, but Medium offers better visual quality while staying above 60 FPS.

Q: How does the RTX 5050 compare to the AMD Radeon RX 5600 XT?

A: The RTX 5050 scores 21035 in average benchmarks, which is 1.6% higher than the RX 5600 XT’s 20713. In practical terms for Doom, the difference would be less than 2 FPS at any resolution.

Q: Is the Ryzen 7 9700X the bottleneck in this system?

A: No. The CPU sits at the 86th percentile among all CPUs with an average benchmark score of 37943, while the GPU sits at the 66th percentile with a score of 21035. The GPU is the limiting factor, especially at 1440p and 4K resolutions.

Q: What frame rates can I expect at 1440p with High settings?

A: The measured average FPS at 2560x1440 High is 96 FPS. This is well above the 60 FPS threshold, providing smooth gameplay with headroom for demanding scenes.

Q: Does the combo meet the 60 FPS threshold at 4K for all settings?

A: No. At 3840x2160, only Low (71 FPS) and Medium (62 FPS) settings clear the threshold. High (52 FPS) and Ultra (43 FPS) fall short, so users must lower settings to maintain 60 FPS at 4K.

The Verdict

The AMD Ryzen 7 9700X and NVIDIA GeForce RTX 5050 can absolutely run Doom, and they do so with distinction at 1080p and 1440p. At 1920x1080, every preset from Low (202 FPS) to Ultra (122 FPS) delivers frame rates that are 2x to 3x above the 60 FPS playable threshold, making this a flawless experience for competitive or casual play. The 1440p results are nearly as impressive: Ultra settings average 79 FPS, High averages 96 FPS, and even the most demanding preset clears the threshold by a 19 FPS margin. This makes 2560x1440 the recommended resolution for this combo, as it offers the best balance of visual fidelity and performance.

At 3840x2160, the system becomes marginal. The verdict data shows only Low (71 FPS) and Medium (62 FPS) settings are playable, with High (52 FPS) and Ultra (43 FPS) failing to reach 60 FPS. The Medium preset’s average of 62 FPS is technically playable, but the minimum FPS of 52 indicates occasional drops below the threshold. For a strictly smooth 4K experience, users would need to accept Low settings or consider a more powerful GPU. The RTX 5050’s 8 GB memory and 128-bit bus are simply not enough for high-detail 4K rendering in Doom.

Ultimately, this is a 1080p and 1440p gaming system. The CPU provides ample headroom for future GPU upgrades, but as configured, the RTX 5050 limits the experience to 1440p Ultra as the practical maximum. For 4K enthusiasts, the verdict is clear: stick to Medium or Low settings, or look elsewhere. The data confirms this is a capable, well-balanced mid-range build that excels at standard resolutions but falls short of high-refresh 4K ambitions.