Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

65%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
173 FPS
Ultra 1080p Measured
106 FPS

1440p (2K / QHD)

Low 1440p Measured
114 FPS
Ultra 1440p Measured
65 FPS

4K (Ultra HD)

Low 4K Measured
63 FPS
Ultra 4K Measured
39 FPS
7.7ms Frame Time
12ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 29,123
Graphics Card
Required 27,325
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 45 55 63
1440p QHD 65 81 100 114
1080p Full HD 106 130 151 173

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 130
1920x1080 Low 173
1920x1080 Medium 151
1920x1080 Ultra 106
2560x1440 High 81
2560x1440 Low 114
2560x1440 Medium 100
2560x1440 Ultra 65
3840x2160 High 45
3840x2160 Low 63
3840x2160 Medium 55
3840x2160 Ultra 39

Performance Analysis: Doom on Your System

Measured FPS Breakdown

The recorded data for this AMD Ryzen 7 5800X and NVIDIA GeForce RTX 2060 combination in Doom shows a clear performance hierarchy across resolutions and presets. At 1920x1080, the system delivers 173.3 FPS on Low settings, 150.8 FPS on Medium, 130.4 FPS on High, and 105.8 FPS on Ultra. These figures indicate that even the most demanding preset at 1080p stays well above the 60 FPS playable threshold, with Ultra running 45.8 FPS higher than the threshold.

Moving to 2560x1440, the averages remain robust: Low produces 113.6 FPS, Medium reaches 99.6 FPS, High holds 80.8 FPS, and Ultra drops to 65.3 FPS. The step from High to Ultra at this resolution costs 15.5 FPS, which is the largest single preset delta in the 1440p group. The 1440p Ultra result is the only setting at this resolution that approaches the 60 FPS line, but it still clears it by 5.3 FPS.

At 3840x2160, the performance curve steepens considerably. Low settings yield 62.8 FPS, Medium falls to 55.4 FPS, High drops to 44.8 FPS, and Ultra bottoms out at 38.7 FPS. The gap between Low and Ultra at 4K is 24.1 FPS, demonstrating that this combination cannot sustain fluid frame rates at higher presets in this resolution. Only the Low preset at 4K crosses the 60 FPS threshold, and it does so narrowly with 62.8 FPS.

The data shows no min or max FPS values recorded for any configuration; only average FPS is available. This means the analysis relies entirely on mean performance, which can mask frame time spikes. However, the averages are consistent across all twelve measured points, suggesting stable behavior under each setting.

CPU and GPU Roles

Benchmark results indicate that the RTX 2060 becomes the dominant constraint as resolution increases, while the Ryzen 7 5800X provides ample headroom at lower resolutions. The scaling from 1080p to 1440p at the same preset shows a moderate drop: High goes from 130.4 to 80.8 FPS, a reduction of 49.6 FPS or roughly 38%. This is a substantial decline, but the system still maintains high frame rates, implying the GPU is the primary limiter even at 1440p.

The transition from 1440p to 4K is far more punishing. At High settings, the drop is from 80.8 to 44.8 FPS, a loss of 36 FPS or about 45%. At Ultra, the fall is from 65.3 to 38.7 FPS, a 26.6 FPS reduction. These steep declines point to the GPU being overwhelmed by the 4K pixel count. The CPU, with 8 cores and 16 threads based on Zen 3 architecture, is unlikely to bottleneck at these frame rates, especially given its high single-thread performance metrics in the database (3dmark single thread score of 943, passmark single thread score of 3445).

The preset scaling within each resolution reinforces this interpretation. At 1080p, moving from Low to Ultra costs 67.5 FPS (173.3 to 105.8), which is a large absolute drop but still leaves the system far above 60 FPS. At 1440p, the same preset swing costs 48.3 FPS (113.6 to 65.3). At 4K, the swing is 24.1 FPS (62.8 to 38.7). The shrinking absolute delta as resolution rises indicates that the GPU is already saturated, so preset changes have less impact on raw FPS because the resolution is the limiting factor. Conversely, at 1080p, the CPU has enough power to feed the GPU at high rates, and the GPU responds to preset changes with larger FPS swings.

The recorded data shows that at 4K Low, the system hits 62.8 FPS, but at 4K Medium it drops to 55.4 FPS. This 7.4 FPS penalty for one preset step suggests the GPU is right at its capability edge. For this game, the RTX 2060 is the component that determines playability at 4K, while the Ryzen 7 5800X is sufficient to avoid CPU-bound behavior at all tested settings.

Similar Performance Alternatives

The database lists nearest rivals for both components based on average benchmark scores. For the AMD Ryzen 7 5800X, the closest match is the Intel Core Ultra 5 135H with an average score of 29093, which is 0.1% behind the Ryzen's 29123 average. The Intel Xeon Phi 7210 scores 29245, putting it 0.4% ahead. The Intel Core i5-13500HX averages 29270, 0.5% higher, and the AMD Ryzen 5 5600XT scores 28940, 0.6% lower. These deltas are all within 1%, meaning any of these CPUs would produce nearly identical frame rates in Doom when paired with the same GPU.

For the NVIDIA GeForce RTX 2060, the nearest rival is the NVIDIA GeForce GTX 580 with a matching average score of 15283, showing a 0% delta. The AMD Radeon 680M scores 15270, just 0.1% lower. The NVIDIA GeForce RTX 3050 OEM averages 15199, 0.6% below, and the AMD Radeon RX 7600 scores 15171, 0.8% lower. Given these tiny margins, swapping the RTX 2060 for any of these cards would yield almost indistinguishable performance in this game. The RTX 2060 sits in the 58th percentile of all GPUs, while the Ryzen 7 5800X is in the 81st percentile of all CPUs, indicating the CPU is a stronger component relative to its peers.

The practical implication is that a system with the Ryzen 7 5800X and any of its listed rivals would behave nearly identically in Doom, as would a system with the RTX 2060 and any of its GPU rivals. The combination's overall ranking in the database is 2928 out of 3712 tested combos, placing it in the lower-middle range of all tested configurations for this game.

The Verdict

The question of whether this PC can run Doom depends entirely on resolution and preset. According to the verdict by resolution, 1920x1080 is fully playable across all four presets: Low at 173.3 FPS, Medium at 150.8 FPS, High at 130.4 FPS, and Ultra at 105.8 FPS. Every setting clears the 60 FPS threshold by a wide margin, so users at 1080p can select Ultra without concern.

At 2560x1440, all presets also remain playable. Low produces 113.6 FPS, Medium 99.6 FPS, High 80.8 FPS, and Ultra 65.3 FPS. The Ultra preset is the closest to the threshold, but it still exceeds 60 FPS by 5.3 FPS. This means 1440p users can run the game at maximum quality, though the margin is thinner than at 1080p.

At 3840x2160, only the Low preset achieves playable status with 62.8 FPS. Medium falls to 55.4 FPS, High to 44.8 FPS, and Ultra to 38.7 FPS, all below the 60 FPS threshold. The verdict clearly states that Low is the only playable setting at 4K. Users who want 4K performance must accept reduced visual fidelity, while those who prioritize quality should stick to 1440p or 1080p.

The system can run Doom, but the experience is highly resolution-dependent. It excels at 1080p and 1440p, delivering smooth frame rates even at Ultra. At 4K, it is only marginally playable on Low, making that resolution a trade-off between frame rate and visuals.

How This Combo Ranks

In the database of tested combinations for Doom, this pairing of AMD Ryzen 7 5800X and NVIDIA GeForce RTX 2060 ranks 2928 out of 3712 combos. This places it in the 79th percentile of all tested configurations, meaning roughly 784 combos perform worse while 2928 perform better. The rank reflects the RTX 2060's position as a mid-range GPU; the CPU is strong, but the GPU limits overall performance in this title.

The percentile data for the individual components supports this ranking. The CPU's 81st percentile among all CPUs indicates it is a high-end part, but the GPU's 58th percentile shows it is firmly mid-range. Since Doom at higher resolutions is GPU-bound, the combination's overall rank is dragged down by the GPU. At 1080p, the CPU can push high frame rates, but at 4K, the GPU becomes the bottleneck, which is why the combo ranks lower than many others with faster graphics cards.

This ranking is specific to Doom. Other games with different engine characteristics could see different relative performance, but within this title, the data shows a clear ceiling imposed by the RTX 2060.

Best Settings per Resolution

For each resolution, the best setting is defined as the most demanding preset that still maintains average FPS at or above 60. The database provides this directly:

At 1920x1080, the best setting is Ultra with an average of 105.8 FPS. This is the maximum quality preset, and it runs at nearly double the threshold. There is no need to lower settings at this resolution.

At 2560x1440, the best setting is also Ultra, with an average of 65.3 FPS. While this is above 60 FPS, the margin is only 5.3 FPS. Users who prioritize consistency over peak quality might consider High at 80.8 FPS, but the data confirms Ultra is technically playable.

At 3840x2160, the best setting is Low, with an average of 62.8 FPS. This is the only preset that clears 60 FPS at 4K. Medium falls short at 55.4 FPS, so there is no room for quality improvements without dropping below the threshold.

These recommendations follow directly from the measured averages. The 1080p and 1440p results allow full visual fidelity, while 4K requires the lowest preset to stay fluid.

FAQ

Q: Can this PC run Doom at 1080p with maximum settings?

A: Yes. At 1920x1080 with Ultra settings, the average FPS is 105.8, which is well above the 60 FPS playable threshold.

Q: What is the highest playable setting at 1440p?

A: Ultra is playable at 2560x1440 with an average of 65.3 FPS. All four presets (Low, Medium, High, Ultra) exceed 60 FPS at this resolution.

Q: Is 4K gaming possible with this hardware?

A: Only on Low settings. The 3840x2160 Low preset averages 62.8 FPS, while Medium drops to 55.4 FPS, High to 44.8 FPS, and Ultra to 38.7 FPS.

Q: How does the RTX 2060 compare to its nearest rivals?

A: The RTX 2060 has an average benchmark score of 15290. The NVIDIA GeForce GTX 580 scores 15283 (0% delta), the AMD Radeon 680M scores 15270 (0.1% lower), the RTX 3050 OEM scores 15199 (0.6% lower), and the AMD Radeon RX 7600 scores 15171 (0.8% lower).

Q: What is the frame rate difference between 1080p and 1440p at High settings?

A: At 1920x1080 High, the average is 130.4 FPS. At 2560x1440 High, the average is 80.8 FPS. This is a drop of 49.6 FPS.

Q: How does the Ryzen 7 5800X rank among all CPUs?

A: The Ryzen 7 5800X is in the 81st percentile of all CPUs, with an average benchmark score of 29123. Its closest rival, the Intel Core Ultra 5 135H, scores 29093 (0.1% lower).