Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

86%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
343 FPS
Ultra 1080p Measured
279 FPS

1440p (2K / QHD)

Low 1440p Measured
295 FPS
Ultra 1440p Measured
179 FPS

4K (Ultra HD)

Low 4K Measured
158 FPS
Ultra 4K Measured
95 FPS
3.2ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 27,051
Graphics Card
Required 27,325
Your GPU 79,842

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 95 119 138 158
1440p QHD 179 221 258 295
1080p Full HD 279 309 326 343

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 309
1920x1080 Low 343
1920x1080 Medium 326
1920x1080 Ultra 279
2560x1440 High 221
2560x1440 Low 295
2560x1440 Medium 258
2560x1440 Ultra 179
3840x2160 High 119
3840x2160 Low 158
3840x2160 Medium 138
3840x2160 Ultra 95

Performance Analysis: Doom on Your System

The AMD Ryzen 7 5700G paired with the NVIDIA GeForce RTX 5090 delivers extraordinary performance in Doom (2016), with every tested resolution and preset clearing the 60 FPS playable threshold by a substantial margin. The benchmark data reveals a system that is overwhelmingly GPU-bound at higher resolutions, while the CPU keeps up effortlessly at 1080p, resulting in frame rates that push far beyond what most displays can even show.

Measured FPS Breakdown

At 3840x2160 (4K), the RTX 5090 demonstrates its dominance, though the scaling between presets shows clear GPU workload characteristics. At Low settings, the combo achieves an average of 158.4 FPS, which drops to 138.1 FPS at Medium — a reduction of roughly 13% from the jump in visual complexity. High settings yield 118.8 FPS, and the most demanding Ultra preset still maintains 94.8 FPS. The spread from Low to Ultra is a 40% performance penalty, which is relatively modest for a 2016 title running on modern hardware, indicating the RTX 5090 has ample headroom even at 4K.

Moving to 2560x1440, frame rates climb dramatically. Low settings produce 295.3 FPS, while Medium delivers 257.9 FPS and High reaches 220.8 FPS. Even Ultra at 1440p holds 179 FPS, which is nearly double the 4K Ultra result. The resolution scaling is telling: dropping from 4K to 1440p increases average FPS by 89% at Ultra settings (from 94.8 to 179), a near-linear relationship that suggests the GPU is the primary bottleneck at both resolutions.

At 1920x1080, the results become almost absurdly high. Low settings hit 343.4 FPS, Medium reaches 326.3 FPS, and High sits at 309.2 FPS. The Ultra preset still produces 279.4 FPS, which means even the most demanding settings at 1080p exceed the refresh rate of virtually all consumer monitors. Interestingly, the gap between Low and Ultra at 1080p is only 19%, far smaller than the 40% gap observed at 4K, suggesting that at lower resolutions, the CPU begins to impose a ceiling on performance.

Notably, the dataset provides only average FPS values, with no minimum or maximum frame times recorded. This absence of 1% low data means the analysis cannot fully address frame pacing or stutter potential, though the consistently high averages imply a smooth experience across all configurations.

Similar Performance Alternatives

The CPU's nearest rivals in the benchmark database provide context for its role in this pairing. The Intel Core i9-9900K scores nearly identically, with a delta of -0.2%, meaning the 5700G trades blows with Intel's former flagship. The AMD Ryzen AI 7 445 sits 0.4% ahead, and the Intel Core i7-1370P trails by just 0.6%. The Intel Core i5-14400T leads the group at 0.4% above the 5700G. These minute differences—all within 1%—indicate that any of these CPUs would produce virtually indistinguishable frame rates in Doom, especially given the game's age and the RTX 5090's immense throughput.

On the GPU side, the RTX 5090's neighbors are somewhat unexpected. The NVIDIA Tesla P100 PCIe 16 GB comes within 0.3% of the 5090's average score, though that comparison is based on synthetic benchmarks rather than gaming workloads. The Tesla P100 PCIe 12 GB trails by 0.6%, and the AMD Radeon RX 6850M XT is 1.1% behind. The AMD Radeon Pro Vega 64X actually scores 1.4% higher on average, though again, these are compute-oriented comparisons. For gaming specifically, the RTX 5090's architecture and driver support would likely widen these gaps considerably in Doom, but the raw benchmark proximity suggests the 5700G is not leaving significant performance on the table.

Best Settings per Resolution

At 3840x2160, the most demanding preset that maintains at least 60 FPS is Ultra, running at 94.8 FPS. This is a comfortable 58% margin above the playable threshold, meaning users can max out every visual option without concern. The data shows no configuration at 4K dips below 60 FPS, so the recommendation is simply the highest quality setting.

For 2560x1440, Ultra again is the answer, delivering 179 FPS — nearly triple the threshold. The 1440p Ultra result is so far above 60 FPS that even the most demanding future mods or supersampling techniques would likely remain playable.

At 1920x1080, Ultra provides 279.4 FPS, which is over 4.6 times the playable threshold. This makes 1080p Ultra the obvious choice for competitive play or high-refresh-rate displays, with enough headroom to enable V-Sync at 240 Hz or even 360 Hz monitors without dropping below the cap.

The Verdict

The verdict is unambiguous: this system can run Doom at maximum settings across every resolution tested. The `verdictByResolution` data confirms that all four presets (Low, Medium, High, Ultra) are playable at 3840x2160, 2560x1440, and 1920x1080. The best settings at each resolution are Ultra, with average frame rates of 94.8 FPS at 4K, 179 FPS at 1440p, and 279.4 FPS at 1080p.

The only caveat is that the 60 FPS threshold is so thoroughly exceeded that the limiting factor becomes the display's refresh rate rather than the hardware. At 4K Ultra, the 94.8 FPS average suggests a 120 Hz monitor would be fully utilized, while 1440p and 1080p users could push toward 240 Hz or beyond. The Ryzen 7 5700G, despite being a mid-range 2021 CPU, never becomes a meaningful constraint in this title, which confirms Doom's efficient engine and the GPU's ability to shoulder the rendering load.

CPU and GPU Roles

The data reveals a clear division of labor between the Ryzen 7 5700G and the RTX 5090. At 4K, the GPU is unequivocally the dominant component. The frame rate scales nearly linearly with resolution: Ultra at 4K yields 94.8 FPS, while Ultra at 1440p jumps to 179 FPS (a 89% increase), and Ultra at 1080p reaches 279.4 FPS (a further 56% increase). This pattern is classic GPU-bound behavior, where reducing pixel count directly translates to higher throughput.

However, at 1080p, the scaling pattern shifts. The difference between Low (343.4 FPS) and Ultra (279.4 FPS) is just 19%, compared to 40% at 4K. This compression suggests the CPU is beginning to exert influence at lower resolutions, where the RTX 5090 can render frames faster than the Ryzen 7 5700G can feed it. The 5700G's 8-core, 16-thread Zen 3 architecture—boosting to 4.60 GHz—is evidently sufficient for Doom's single-threaded-heavy workload, but the game's engine likely saturates one or two cores, creating a soft ceiling around 350 FPS.

The preset scaling reinforces this interpretation. At 1440p, the gap from Low (295.3 FPS) to Ultra (179 FPS) is 39%, nearly identical to the 4K gap. But at 1080p, that gap shrinks to 19%, indicating that the CPU's frame-delivery limit is being approached. For users seeking maximum frame rates at 1080p, the RTX 5090 is overkill; a less powerful GPU would yield similar results, while a faster CPU might push beyond 343 FPS at Low settings.

FAQ

Q: Can this PC run Doom at 4K Ultra settings?

A: Yes, the system achieves 94.8 FPS at 3840x2160 with Ultra settings, which is well above the 60 FPS playable threshold.

Q: What is the highest FPS this combo can produce?

A: The maximum recorded average is 343.4 FPS at 1920x1080 with Low settings. At 1080p Ultra, it still reaches 279.4 FPS.

Q: Is the Ryzen 7 5700G a bottleneck for the RTX 5090 in this game?

A: The data suggests minimal bottlenecking at 4K and 1440p, where the GPU dominates. At 1080p, the 19% gap between Low and Ultra (vs. 40% at 4K) hints at a CPU ceiling, but the 5700G still delivers over 279 FPS at Ultra, so the practical impact is negligible.

Q: How does the RTX 5090 compare to its nearest GPU rivals?

A: The RTX 5090's average benchmark score is within 0.3% of the Tesla P100 PCIe 16 GB, 0.6% of the Tesla P100 PCIe 12 GB, and 1.1% of the Radeon RX 6850M XT. The Radeon Pro Vega 64X scores 1.4% higher in synthetic tests.

Q: Which resolution offers the best balance of quality and performance?

A: At 2560x1440 Ultra, the system produces 179 FPS, which is both visually rich and fast enough for high-refresh-rate displays. This is the sweet spot between 4K's 94.8 FPS and 1080p's 279.4 FPS.

Q: What is the combo's ranking among all tested systems for this game?

A: This combination ranks 160th out of 3712 tested combos in Doom, placing it in the top 4.3% of all configurations.

How This Combo Ranks

The Ryzen 7 5700G + RTX 5090 combination ranks 160th out of 3712 tested systems for Doom, a position that places it in the top 4.3% of all configurations. This ranking is notably lower than what the GPU alone might suggest—the RTX 5090's percentile of 92 among all GPUs implies near-top-tier graphics performance. The gap between GPU percentile and combo rank indicates that the Ryzen 7 5700G, with its 79th percentile among CPUs, is the limiting factor in this pairing.

The ranking also reflects that Doom is a well-optimized title that runs exceptionally well on a wide range of hardware. Many lower-tier GPUs paired with stronger CPUs might achieve similar frame rates at 1080p, given that the RTX 5090's raw power is constrained by the CPU's frame-delivery ceiling. However, at 4K, the RTX 5090's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth come into full play, and the 5700G's single-thread performance (scoring 1494 in Cinebench R23) proves adequate to avoid bottlenecking.

In the broader context, this combo sits just above the Intel Core i9-9900K in CPU benchmark terms (delta of -0.2%), meaning a system with that CPU and the RTX 5090 would likely produce nearly identical results. The ranking of 160th suggests that while the RTX 5090 is a top-tier GPU, the 5700G's mid-range standing keeps this combo from reaching the very pinnacle of the leaderboard—systems with newer, higher-clocked CPUs paired with the 5090 would occupy the top spots. For Doom specifically, however, the practical difference is invisible to the player, as the frame rates are already far beyond what any standard display can reproduce.