Instant compatibility check with FPS benchmarks and optimization tips
Doom
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 57 | 69 | 81 | 91 |
| 1440p QHD | 101 | 123 | 149 | 169 |
| 1080p Full HD | 155 | 192 | 227 | 261 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Doom on Your System
Measured FPS Breakdown
At 4K (3840x2160), the AMD Ryzen 7 5700G + NVIDIA GeForce RTX 3070 combo delivers a playable experience across most presets, though the ceiling is limited. High settings produce an average of 68.8 FPS, Medium drops slightly to 80.9 FPS, and Low pushes further to 91.3 FPS. The Ultra preset, however, falls below the 60 FPS playability threshold with an average of 56.9 FPS. That sub-60 result at Ultra is the only preset across all resolutions that fails to clear the playable mark.
Moving to 1440p (2560x1440), the headroom expands considerably. Low settings average 168.6 FPS, Medium reaches 149 FPS, and High settles at 123 FPS. Even Ultra, the most demanding preset, maintains a strong 101.3 FPS average. The gap between Low and Ultra at this resolution is roughly 67 FPS, showing that the GPU has ample compute headroom even when settings are maxed out.
At 1080p (1920x1080), the combo becomes a high-refresh-rate machine. Low settings average 261.1 FPS, Medium hits 227.3 FPS, and High stays at 192 FPS. Ultra still delivers 154.8 FPS, which is more than double the 60 FPS threshold. The scaling from 1440p to 1080p is substantial: Ultra improves from 101.3 FPS to 154.8 FPS, a gain of roughly 53 FPS. Low settings jump from 168.6 FPS to 261.1 FPS, an increase of about 92 FPS. These figures indicate that the RTX 3070 is the primary bottleneck at higher resolutions, while at 1080p the CPU begins to play a larger role in limiting peak frame rates.
The measured data shows no min or max FPS values, only averages. That means the analysis relies entirely on mean frame rates, and the absence of percentile lows prevents conclusions about frame-time consistency or stuttering behavior. The verdict is nonetheless clear: every resolution and preset combination except 4K Ultra clears 60 FPS.
Similar Performance Alternatives
The CPU's nearest rivals in benchmark scores provide context for how this processor compares in synthetic workloads. The Intel Core i9-9900K scores 27097 on average, which is 0.2% higher than the Ryzen 7 5700G's 27051 average. The AMD Ryzen AI 7 445 trails by 0.4% with a score of 26936, while the Intel Core i5-14400T leads by 0.4% at 27166. The Intel Core i7-1370P sits 0.6% behind at 26900. These deltas are all within a single percentage point, meaning the 5700G's CPU performance is functionally equivalent to these four alternatives for gaming workloads. None of these rivals would produce meaningfully different frame rates in Doom, assuming the GPU remains the same.
On the GPU side, the RTX 3070's nearest rivals show a similar clustering. The AMD Radeon RX 7600 XT scores 17083 on average, just 0.7% above the RTX 3070's 17208. The NVIDIA GeForce GTX 690 and AMD Radeon HD 7970M both sit within 1.1% of the RTX 3070, with scores of 17037 and 17019 respectively. The NVIDIA Tesla K40c is the only rival that scores higher, at 17468, which is 1.5% above. The narrow deltas suggest that swapping the RTX 3070 for any of these cards would shift FPS by only a few frames in either direction. A user with an RX 7600 XT would see nearly identical performance in Doom, while a GTX 690 or HD 7970M would be slightly slower but still within the same performance envelope.
The percentile rankings reinforce this picture. The Ryzen 7 5700G sits in the 79th percentile among all CPUs, while the RTX 3070 lands in the 61st percentile among all GPUs. This means the CPU is relatively stronger than the GPU in the broader hardware landscape, but for Doom specifically, the GPU is the more critical component at higher resolutions.
FAQ
Q: Can this PC run Doom at 4K Ultra settings?
A: No. The Ultra preset at 3840x2160 produces an average of 56.9 FPS, which is below the 60 FPS playability threshold. High settings at 4K are the most demanding playable option, averaging 68.8 FPS.
Q: What is the best preset for 1440p gaming?
A: Ultra settings at 2560x1440 average 101.3 FPS, which clears the 60 FPS threshold with substantial margin. The verdict data lists Ultra as the best settings for this resolution.
Q: How does the RTX 3070 compare to its closest GPU rivals?
A: The RTX 3070 averages 17208 in benchmark scores. The AMD Radeon RX 7600 XT is 0.7% higher, the NVIDIA GeForce GTX 690 is 1% higher, the AMD Radeon HD 7970M is 1.1% higher, and the NVIDIA Tesla K40c is 1.5% lower. All deltas are within a narrow range.
Q: Is the CPU or GPU more important for Doom at 1080p?
A: The data shows a large FPS jump from 1440p to 1080p, particularly at Low settings where the average rises from 168.6 to 261.1 FPS. This suggests the GPU is still the main constraint at 1080p, though the CPU's role becomes more visible at lower settings where frame rates exceed 200 FPS.
Q: What frame rate can I expect at 1080p High settings?
A: The measured average is 192 FPS at 1920x1080 with High settings. This is more than three times the 60 FPS playability threshold.
Q: Does the combo rank high among all tested configurations?
A: The combo ranks 1557 out of 3712 tested combinations, placing it in the upper half but not the top tier. The CPU's 79th percentile and GPU's 61st percentile rankings explain this mid-tier position.
The Verdict
The AMD Ryzen 7 5700G + NVIDIA GeForce RTX 3070 can run Doom across nearly every resolution and preset combination tested. At 1920x1080, all four presets clear the 60 FPS threshold, with Ultra averaging 154.8 FPS and Low reaching 261.1 FPS. At 2560x1440, every preset also stays above 60 FPS, including Ultra at 101.3 FPS. At 3840x2160, three of four presets are playable: High at 68.8 FPS, Medium at 80.9 FPS, and Low at 91.3 FPS. The single exception is 4K Ultra, which averages 56.9 FPS and falls just short of the 60 FPS playability mark.
The verdict data identifies the best playable settings per resolution. For 4K, High is the most demanding preset that stays above 60 FPS, averaging 68.8 FPS. For 1440p, Ultra is the best option at 101.3 FPS. For 1080p, Ultra leads at 154.8 FPS. Users targeting a locked 60 FPS experience have considerable headroom at 1080p and 1440p, while 4K requires dropping to High or lower to maintain the threshold.
The margin at 4K Ultra is narrow — just 3.1 FPS below the threshold — which suggests that minor settings tweaks or driver updates could potentially push it over 60 FPS. However, the measured data does not support claiming that 4K Ultra is playable as configured.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 68.8 FPS. Medium averages 80.9 FPS and Low averages 91.3 FPS, both also playable, but High offers the best visual quality while maintaining the threshold. Ultra at 56.9 FPS is not playable.
At 2560x1440, Ultra is the best playable preset, averaging 101.3 FPS. This provides the maximum visual fidelity while still delivering well above the 60 FPS target. The next step down, High, averages 123 FPS, but Ultra is the recommended choice given the available headroom.
At 1920x1080, Ultra again leads with an average of 154.8 FPS. The combo has so much performance at this resolution that even the most demanding preset leaves substantial margin over the playability threshold. Low settings reach 261.1 FPS, but there is no need to sacrifice visual quality when Ultra already exceeds 150 FPS.
How This Combo Ranks
The Ryzen 7 5700G + RTX 3070 combination ranks 1557 out of 3712 tested combos in Doom, placing it in the 58th percentile of all configurations tested. This is a solid mid-tier result, consistent with the individual component percentiles: the CPU sits at the 79th percentile among all CPUs, while the GPU sits at the 61st percentile among all GPUs. The combo rank is lower than the CPU's percentile but slightly above the GPU's percentile, suggesting the GPU constrains the overall ranking more than the CPU.
The rank implies that a large number of tested combos outperform this pairing, but also that it beats roughly 2,155 other configurations. For a game like Doom, which is not particularly demanding by modern standards, this mid-tier position translates into playable or highly playable performance at most settings, as the FPS data confirms. The gap between the 79th percentile CPU and the 61st percentile GPU indicates that upgrading the GPU would yield a greater ranking improvement than upgrading the CPU.
CPU and GPU Roles
The scaling between resolutions and presets reveals which component matters more for Doom. At 3840x2160, the average FPS ranges from 56.9 at Ultra to 91.3 at Low, a spread of 34.4 FPS. At 2560x1440, the spread is 67.3 FPS (from 101.3 at Ultra to 168.6 at Low). At 1920x1080, the spread widens to 106.3 FPS (from 154.8 at Ultra to 261.1 at Low). This increasing spread at lower resolutions indicates that the GPU becomes less of a bottleneck as resolution drops, allowing the CPU to drive higher frame rates.
The resolution scaling tells a similar story. Moving from 4K to 1440p at Ultra improves FPS from 56.9 to 101.3, a gain of 44.4 FPS. Moving from 1440p to 1080p at Ultra improves FPS from 101.3 to 154.8, a gain of 53.5 FPS. The gains are larger at lower resolutions, which is consistent with a GPU-bound scenario at 4K transitioning to a more balanced or CPU-bound scenario at 1080p.
At 4K, the GPU is clearly the dominant factor. The Ryzen 7 5700G's eight cores and 16 threads are more than sufficient for Doom's workload, and the RTX 3070's 8 GB GDDR6 memory and 448.0 GB/s bandwidth become the limiting resource. At 1080p, the CPU's single-thread performance (Cinebench R23 single-core score of 1494) becomes more relevant, particularly at Low settings where the GPU can render frames quickly enough to expose CPU limitations. The 261.1 FPS result at 1080p Low is likely near the CPU's practical ceiling for this game, though the data does not include a separate CPU-only test to confirm this.
The practical implication is that users targeting 4K should focus on GPU upgrades, while users targeting high refresh rates at 1080p might benefit from a stronger CPU, though the 5700G already delivers well above 144 FPS at most settings. The RTX 3070's 20.31 TFLOPS FP32 compute and 317.4 GTexel/s texture rate are ample for Doom's id Tech 6 engine, which is known for efficient rendering. The combo's weakest link is the GPU at 4K Ultra, where the 56.9 FPS result falls just short of playable.