Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

84%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
345 FPS
Ultra 1080p Measured
288 FPS

1440p (2K / QHD)

Low 1440p Measured
298 FPS
Ultra 1440p Measured
189 FPS

4K (Ultra HD)

Low 4K Measured
170 FPS
Ultra 4K Measured
102 FPS
3.2ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 25,517
Graphics Card
Required 27,325
Your GPU 77,712

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 102 125 148 170
1440p QHD 189 231 273 298
1080p Full HD 288 310 329 345

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 310
1920x1080 Low 345
1920x1080 Medium 329
1920x1080 Ultra 288
2560x1440 High 231
2560x1440 Low 298
2560x1440 Medium 273
2560x1440 Ultra 189
3840x2160 High 125
3840x2160 Low 170
3840x2160 Medium 148
3840x2160 Ultra 102

Performance Analysis: Doom on Your System

The AMD Ryzen 7 5700 paired with the NVIDIA GeForce RTX 5090 D delivers an exceptionally strong performance profile for Doom, with measured data showing that every tested resolution and settings combination clears the 60 FPS playable threshold by a significant margin. This analysis breaks down the measured frame rates, component scaling, and comparative positioning of this combination within the broader benchmark database.

Best Settings per Resolution

At 3840x2160, the most demanding preset that maintains at least 60 FPS is Ultra, which achieves an average of 102 FPS. The data confirms that even the highest visual quality setting at 4K resolution operates far above the playable threshold, leaving substantial headroom for demanding scenes. The High preset at this resolution averages 125 FPS, Medium averages 148 FPS, and Low averages 170 FPS, demonstrating a clear progression where each step down in settings yields roughly 20-25 additional frames per second.

Moving to 2560x1440, the Ultra preset remains the best choice, delivering an average of 189 FPS. This represents a dramatic jump from the 4K results, with the resolution reduction producing an 87 FPS improvement at the same Ultra settings. The High preset averages 231 FPS, Medium averages 273 FPS, and Low reaches 298 FPS, showing that at 1440p the RTX 5090 D has ample computational headroom to saturate high-refresh-rate displays even with maximum graphical fidelity.

At 1920x1080, the Ultra preset again provides the best experience with an average of 288 FPS. The measured data shows High averaging 310 FPS, Medium averaging 329 FPS, and Low peaking at 345 FPS. Notably, the gap between Ultra and Low at 1080p is only 57 FPS, compared to the 68 FPS gap at 4K, suggesting that at lower resolutions the CPU begins to exert more influence on the final frame rate. Across all three resolutions, the Ultra preset is the recommended choice because it never drops below 102 FPS average, which is comfortably above the 60 FPS playable threshold while maximizing visual quality.

CPU and GPU Roles

The benchmark data reveals interesting scaling patterns that clarify the respective roles of the Ryzen 7 5700 and RTX 5090 D across resolutions. The transition from 1080p to 1440p at Ultra settings shows a decrease from 288 FPS to 189 FPS, a 34% performance drop. Moving from 1440p to 4K at Ultra settings further reduces frame rates from 189 FPS to 102 FPS, another 46% reduction. This consistent degradation with increasing resolution indicates that the GPU is the primary bottleneck at higher resolutions, as expected with a demanding 4K workload.

However, the scaling between settings at each resolution provides insight into CPU involvement. At 1080p, the difference between Low (345 FPS) and Ultra (288 FPS) is only 57 FPS, or 16.5%. At 1440p, the same settings comparison shows a 109 FPS difference (298 vs 189), representing 36.6% scaling. At 4K, the gap widens further to 68 FPS (170 vs 102), which is 40% scaling. This pattern suggests that at 1080p, the Ryzen 7 5700's capabilities limit the maximum achievable frame rate, preventing the settings changes from having their full effect. The CPU's 8 cores and 16 threads provide sufficient processing power to feed the GPU at lower resolutions, but the data implies that the 5700 becomes a limiting factor above roughly 300 FPS.

The GPU's role becomes more pronounced at higher resolutions and quality settings. The RTX 5090 D's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth ensure that texture streaming and memory bandwidth never become constraints, even at 4K Ultra. The measured frame rates at 4K Ultra (102 FPS) versus 4K Low (170 FPS) show a 67% performance range, indicating that the GPU has significant headroom to trade for visual fidelity. For players targeting maximum refresh rates, the data shows that the CPU becomes the limiting factor at 1080p, while the GPU dominates the performance equation at 1440p and 4K.

FAQ

Q: Can this system run Doom at 4K with all settings maxed out?

A: Yes. The measured data shows an average of 102 FPS at 3840x2160 with Ultra settings, which is well above the 60 FPS playable threshold. This setting combination is listed as playable in the verdict data.

Q: What is the highest average frame rate achievable at 1080p?

A: The Low preset at 1920x1080 produces the highest measured average at 345 FPS. The Ultra preset still delivers 288 FPS, which is the recommended setting given the minimal performance cost relative to the visual quality gain.

Q: How much performance is lost when moving from 1440p to 4K at Ultra settings?

A: The frame rate drops from 189 FPS at 2560x1440 Ultra to 102 FPS at 3840x2160 Ultra, a reduction of 87 FPS or approximately 46%. This indicates the GPU workload roughly doubles when pixel count increases by that margin.

Q: Is the Ryzen 7 5700 or RTX 5090 D the primary bottleneck at 1080p?

A: The data suggests the CPU becomes the limiting factor at 1080p, as the frame rate gap between Low and Ultra settings narrows to only 57 FPS at this resolution. At 1440p and 4K, the GPU takes over as the dominant performance determinant.

Q: What are the minimum frame rates recorded at Medium settings?

A: At 1920x1080 Medium, the minimum FPS is 279 with a maximum of 378. At 2560x1440 Medium, the minimum is 232 and maximum is 314. At 3840x2160 Medium, the minimum is 126 and maximum is 170.

Q: How does this combination rank among all tested hardware configurations?

A: The combo ranks 115th out of 3712 tested combinations, placing it in the top 3.1% of all configurations in the database for Doom performance.

The Verdict

The data is unambiguous: this system runs Doom exceptionally well at every resolution and preset combination tested. At 3840x2160, all four settings presets (Low, Medium, High, Ultra) are marked as playable, with Ultra achieving 102 FPS average. The 2560x1440 results are even more impressive, with Ultra delivering 189 FPS and every other preset exceeding 230 FPS. At 1920x1080, the system pushes past 288 FPS even at Ultra settings, with Low reaching 345 FPS.

The verdict by resolution confirms that the best settings at each resolution are Ultra, with average frame rates of 102 FPS at 4K, 189 FPS at 1440p, and 288 FPS at 1080p. These figures represent 1.7x, 3.15x, and 4.8x the 60 FPS playable threshold respectively. For competitive play at high refresh rates, the 1080p and 1440p results provide ample headroom even with maximum visual quality. At 4K, the 102 FPS average leaves room for demanding scenes without dropping below playable levels, though players with 120Hz or higher displays may prefer the High preset at 125 FPS for additional smoothness. The combination of the Ryzen 7 5700 and RTX 5090 D proves to be a top-tier setup for this title, with no scenario in the measured data failing to meet the 60 FPS requirement.

Similar Performance Alternatives

The CPU's nearest rivals in the benchmark database provide context for its performance class. The Intel Xeon D-2752TER scores 25530 on average, representing a negligible 0.1% difference from the Ryzen 7 5700's 25517 average. The AMD Ryzen 5 7640U scores 25485 (0.1% lower), while the AMD Ryzen 5 6600H scores 25550 (0.1% higher). The AMD Ryzen 7 5825U scores 25446 (0.3% lower). These rival CPUs would produce nearly identical frame rates in Doom, as the performance deltas are all within 0.3% of the Ryzen 7 5700.

For the GPU, the nearest rivals show slightly larger but still modest performance differences. The AMD Radeon RX 6650M XT scores 76904, which is 1.1% lower than the RTX 5090 D's 77712 average. The AMD Radeon RX 6850M XT scores 78940 (1.6% higher), the NVIDIA Tesla P100 PCIe 12 GB scores 79396 (2.1% higher), and the NVIDIA Tesla P100 PCIe 16 GB scores 79605 (2.4% higher). These GPU alternatives would produce frame rates within a few percentage points of the RTX 5090 D, meaning the Ultra preset at each resolution would remain comfortably above 60 FPS with any of these substitutes.

How This Combo Ranks

The combination of the AMD Ryzen 7 5700 and NVIDIA GeForce RTX 5090 D achieves a rank of 115 out of 3712 tested hardware combinations for Doom. This places the configuration in the top 3.1% of all systems in the database, reflecting the exceptional performance demonstrated in the measured frame rates. The ranking is particularly notable given that the CPU is a mid-range desktop processor (78th percentile among all CPUs) while the GPU is a flagship product (92nd percentile among all GPUs). The combination leverages the GPU's immense computational power while the CPU's 8-core, 16-thread configuration provides sufficient processing capacity to avoid significant bottlenecks at most resolutions. The 115th rank suggests that only 114 combinations outperform this setup, typically those pairing even higher-end CPUs with the same or similar flagship GPUs.

Measured FPS Breakdown

At 1920x1080, the measured data shows the following averages: Low settings produce 345 FPS, Medium produces 329 FPS with a minimum of 279 and maximum of 378, High produces 310 FPS, and Ultra produces 288 FPS. The narrow range between Low and Ultra (57 FPS) indicates that at this resolution the system is approaching CPU limits, as the GPU has enough headroom to render even the most demanding settings without significant frame rate variations.

At 2560x1440, the averages are: Low at 298 FPS, Medium at 273 FPS with a minimum of 232 and maximum of 314, High at 231 FPS, and Ultra at 189 FPS. The wider spread between presets (109 FPS from Low to Ultra) demonstrates that the GPU workload at 1440p begins to differentiate settings more meaningfully, while still maintaining frame rates well above 60 FPS across all options.

At 3840x2160, the averages are: Low at 170 FPS, Medium at 148 FPS with a minimum of 126 and maximum of 170, High at 125 FPS, and Ultra at 102 FPS. The scaling from Ultra to Low at 4K shows a 68 FPS improvement, representing the GPU's ability to trade visual quality for performance as needed. Even at the most demanding combination of 4K Ultra, the 102 FPS average remains far above the playable threshold, with the minimum recorded frame rate at 4K Medium (126 FPS) still doubling the 60 FPS requirement. The data across all resolutions and settings paints a consistent picture: this hardware combination provides exceptional performance headroom for Doom, with no configuration tested falling below 102 FPS on average.