Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

72%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
172 FPS
Ultra 1080p Measured
103 FPS

1440p (2K / QHD)

Low 1440p Measured
111 FPS
Ultra 1440p Measured
68 FPS

4K (Ultra HD)

Low 4K Measured
62 FPS
Ultra 4K Measured
39 FPS
7.9ms Frame Time
12ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 34,260
Graphics Card
Required 27,325
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 43 52 62
1440p QHD 68 85 99 111
1080p Full HD 103 127 150 172

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 127
1920x1080 Low 172
1920x1080 Medium 150
1920x1080 Ultra 103
2560x1440 High 85
2560x1440 Low 111
2560x1440 Medium 99
2560x1440 Ultra 68
3840x2160 High 43
3840x2160 Low 62
3840x2160 Medium 52
3840x2160 Ultra 39

Performance Analysis: Doom on Your System

Best Settings per Resolution

At 1920x1080, the AMD Ryzen 7 3700X with the NVIDIA GeForce RTX 2060 delivers its strongest performance, and the Ultra preset remains fully playable. The recorded average of 103.3 FPS at Ultra comfortably clears the 60 FPS playability threshold, so there is no reason to drop below the highest settings unless you want maximum headroom for competitive play. Medium runs at 150.2 FPS, High at 127.4 FPS, and Low at 172.3 FPS, but Ultra is the recommended choice because it keeps the visual fidelity intact while staying far above the minimum target.

Moving to 2560x1440, the same combination still handles every preset above 60 FPS. Ultra produces an average of 68.3 FPS, which is the most demanding preset that remains playable at this resolution. High reaches 84.9 FPS, Medium hits 99.1 FPS, and Low runs at 110.7 FPS. For the best balance of image quality and smoothness, Ultra is the pick here, as it stays above the threshold with enough margin for typical scene-to-scene variation.

At 3840x2160, the situation changes significantly. The RTX 2060's 6 GB GDDR6 frame buffer and the GPU's raw throughput become the limiting factors. The Ultra preset drops to 39.1 FPS, High falls to 42.7 FPS, and Medium reaches 52.2 FPS, all below the 60 FPS target. Only the Low preset manages to clear the threshold, with an average of 61.9 FPS. That makes Low the only viable setting for 4K gaming with this combo, and even then the margin is thin. If you want higher settings at 4K, you would need a more powerful GPU than the RTX 2060.

How This Combo Ranks

In the database's ranking of tested CPU and GPU combinations for Doom, this pairing sits at position 2971 out of 3712 combos. That places it in the lower-middle portion of the field, which is consistent with the hardware's age and tier. The Ryzen 7 3700X is an 8-core, 16-thread processor from the 3000 series, and the RTX 2060 is a Turing-generation GPU with 1920 shading units. Neither component is top-tier by modern standards, but the game itself is from 2016 and scales well on moderate hardware.

The CPU's nearest rivals in the database include the AMD Ryzen AI 7 350, which scores 0.1% higher on average, and the Intel Core i5-13450HX, which is 0.2% behind. The AMD EPYC 4244P is also 0.1% ahead, and the Intel Core Ultra 7 165H outperforms by 0.5%. These are all close results, indicating that the 3700X still competes well with newer mid-range processors in synthetic workloads, even though it launched in mid-2019.

On the GPU side, the RTX 2060's nearest rivals are the NVIDIA GeForce GTX 580, which matches its average score exactly, and the AMD Radeon 680M, which is 0.1% behind. The NVIDIA GeForce RTX 3050 OEM is 0.6% ahead, and the AMD Radeon RX 7600 leads by 0.8%. These small deltas show that the RTX 2060 remains competitive with entry-level and integrated graphics options, but it is clearly outclassed by more recent discrete GPUs. The combo's overall rank reflects this: it is not a top performer, but it is far from the bottom of the list.

Measured FPS Breakdown

The database contains recorded average frame rates for this combo across three resolutions and four quality presets. No minimum or maximum frame time data is available, so the analysis relies on averages.

At 1920x1080, the results are uniformly strong. The Low preset achieves 172.3 FPS, which is the highest recorded value for this combo in any configuration. Medium drops to 150.2 FPS, High to 127.4 FPS, and Ultra to 103.3 FPS. All four presets remain above 100 FPS, meaning the game is highly responsive at 1080p regardless of quality level. The scaling from Low to Ultra costs about 40% of the frame rate, but the absolute numbers are high enough that the loss is acceptable.

At 2560x1440, the frame rates decline but stay healthy. Low runs at 110.7 FPS, Medium at 99.1 FPS, High at 84.9 FPS, and Ultra at 68.3 FPS. The gap between Low and Ultra is roughly 38%, similar to the 1080p scaling. The key point is that even the most demanding preset at 1440p clears the 60 FPS threshold, leaving room for additional background tasks or streaming without dropping below playable levels.

At 3840x2160, the drop is steep. Low averages 61.9 FPS, just above the playability mark. Medium falls to 52.2 FPS, High to 42.7 FPS, and Ultra to 39.1 FPS. The difference between Low and Ultra is about 37%, but the absolute values are much lower, so each preset step has a more noticeable impact on smoothness. The data indicates that 4K is only feasible with the lowest settings, and even then the frame rate is close to the threshold.

FAQ

Q: Can this PC run Doom at 1080p with maximum settings?

A: Yes. At 1920x1080 with the Ultra preset, the recorded average is 103.3 FPS, which is well above the 60 FPS playability threshold.

Q: What is the best setting for 1440p gaming with this combo?

A: The Ultra preset at 2560x1440 runs at 68.3 FPS on average, making it the most demanding setting that still clears 60 FPS. This is the recommended choice for visual quality.

Q: Is 4K playable on this hardware?

A: Only at the Low preset, which averages 61.9 FPS at 3840x2160. Medium, High, and Ultra all fall below 60 FPS, with averages of 52.2, 42.7, and 39.1 FPS respectively.

Q: How does the Ryzen 7 3700X compare to its closest rivals in CPU benchmarks?

A: The AMD Ryzen AI 7 350 scores 0.1% higher, the AMD EPYC 4244P is 0.1% higher, the Intel Core i5-13450HX is 0.2% lower, and the Intel Core Ultra 7 165H is 0.5% higher. The differences are minimal, indicating the 3700X is still competitive with newer mid-range chips.

Q: What is the FPS difference between Low and Ultra presets at 1080p?

A: Low runs at 172.3 FPS while Ultra runs at 103.3 FPS, a difference of 69 FPS. The Ultra preset still provides a smooth experience, so the visual upgrade is worth the frame rate cost.

Q: Which GPU rivals are closest to the RTX 2060 in average benchmark scores?

A: The NVIDIA GeForce GTX 580 matches it exactly, the AMD Radeon 680M is 0.1% lower, the NVIDIA GeForce RTX 3050 OEM is 0.6% higher, and the AMD Radeon RX 7600 is 0.8% higher.

CPU and GPU Roles

The data shows how the balance between the CPU and GPU shifts as resolution changes. At 1920x1080, the RTX 2060 has enough headroom to push frame rates well above 100 FPS at every preset. The Ryzen 7 3700X, with its 8 cores and 16 threads, is more than capable of feeding the GPU at this resolution. The fact that Ultra drops to 103.3 FPS while Low reaches 172.3 FPS indicates that the GPU is the primary limiter even at 1080p, since the CPU can handle the game's demands without bottlenecking.

At 2560x1440, the GPU's workload increases, and the frame rate differences between presets become more pronounced. The drop from Low at 110.7 FPS to Ultra at 68.3 FPS shows that the RTX 2060 is working harder to fill the larger frame buffer. The CPU's role remains secondary, as the 3700X's multi-threaded performance is sufficient for the game's engine at this resolution. The scaling pattern is consistent: higher pixel counts put more pressure on the GPU, while the CPU's contribution stays relatively stable.

At 3840x2160, the GPU becomes the dominant constraint. The RTX 2060's 6 GB memory and 336.0 GB/s bandwidth are pushed to their limits, and the frame rates fall below 60 FPS for all but the Low preset. The CPU's performance is no longer a meaningful factor, since the GPU cannot generate enough frames to stress the 3700X. The recorded averages of 61.9 FPS at Low and 39.1 FPS at Ultra highlight the GPU's inability to handle 4K rendering with high-quality settings. If you were to pair this CPU with a stronger GPU, the 4K results would likely improve, but with the RTX 2060, the GPU is clearly the bottleneck.

The Verdict

This PC can run Doom, but the experience depends heavily on the resolution you choose. At 1920x1080, every preset is playable, with the Ultra setting delivering 103.3 FPS. This is the sweet spot for this combo, offering high visual fidelity and smooth gameplay. At 2560x1440, all four presets also clear the 60 FPS threshold, with Ultra averaging 68.3 FPS. This makes 1440p a viable option if you prefer sharper images over maximum frame rates.

At 3840x2160, the verdict is more restrictive. Only the Low preset reaches 61.9 FPS, which barely passes the playability mark. Medium, High, and Ultra all fall short, with averages of 52.2, 42.7, and 39.1 FPS respectively. If 4K gaming is a priority, this hardware is not sufficient for anything beyond the lowest settings. The data suggests that the RTX 2060 is the limiting factor at 4K, while the Ryzen 7 3700X provides adequate CPU performance across all tested resolutions. For most users, the practical choice is to play at 1440p with Ultra settings or at 1080p with Ultra, both of which offer a strong experience.