Instant compatibility check with FPS benchmarks and optimization tips
Doom
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 52 | 62 | 71 |
| 1440p QHD | 79 | 96 | 114 | 131 |
| 1080p Full HD | 122 | 149 | 176 | 202 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Doom on Your System
The AMD Ryzen 5 9600X paired with the NVIDIA GeForce RTX 5050 delivers playable frame rates in Doom across 1080p and 1440p, with 4K requiring a settings compromise. The CPU carries a launch MSRP of $279, while the GPU's launch MSRP is $249. Benchmark results indicate this combination can exceed the 60 FPS threshold at every resolution when the correct preset is selected, though headroom shrinks as resolution climbs.
FAQ
Q: Can this PC run Doom at 4K?
A: Yes, but only on Low and Medium presets. The measured average FPS at 3840x2160 is 71 on Low and 62 on Medium; High and Ultra fall below the 60 FPS playable threshold, averaging 52 and 43 respectively.
Q: What is the highest playable preset at 1440p?
A: Ultra runs at an average of 79 FPS at 2560x1440, so all four presets (Low, Medium, High, Ultra) are playable at this resolution.
Q: How does the RTX 5050 compare to the RX 5600 XT?
A: The RTX 5050's average benchmark score is 21035, which is 1.6% higher than the RX 5600 XT's 20713, making it slightly faster in synthetic tests.
Q: Where does this combo rank among tested systems?
A: This CPU+GPU pair ranks 2281 out of 3712 tested combinations, placing it in the lower half of the database—better than 1431 combos but worse than 2280.
Q: What CPU is closest in performance to the Ryzen 5 9600X?
A: The AMD Ryzen 7 PRO 5755GE is the nearest rival, scoring 29656 versus the 9600X's 29713, a difference of 0.2%.
Q: Is the CPU or GPU the limiting factor?
A: At 1080p Low, the system reaches 202 FPS, indicating the CPU is not a bottleneck. The GPU becomes the primary limit at higher resolutions and presets, as shown by the consistent drop in frame rates when resolution increases.
How This Combo Ranks
The combination of the Ryzen 5 9600X and RTX 5050 holds the 2281st position out of 3712 tested configurations for Doom. This means 2280 systems deliver higher average frame rates, while 1431 deliver lower ones—placing the combo in the 38.6th percentile of the database. The CPU alone sits at the 81st percentile among all processors, and the GPU at the 66th percentile among all graphics cards. The gap between those two percentiles indicates that the GPU is the weaker link in this pairing, which is consistent with the combo's overall rank. For a game like Doom, which is not exceptionally demanding by modern standards, the combo still manages to hit 60 FPS at 1080p and 1440p, but the ranking shows it is not a high-end solution.
CPU and GPU Roles
The data shows a clear pattern of GPU-bound scaling. At 1080p, lowering the preset from Ultra to Low raises the average FPS from 122 to 202—a 66% increase. At 1440p, the same preset change yields 79 to 131 FPS, a 66% increase. At 4K, the jump is from 43 to 71 FPS, also a 65% increase. This consistency indicates that the GPU's workload scales directly with settings, and the CPU is not a limiting factor at any resolution.
Resolution scaling tells a similar story. At the Low preset, average FPS drops from 202 at 1080p to 131 at 1440p (a 35% reduction) and then to 71 at 4K (a 46% reduction from 1440p). At the Ultra preset, the drop is from 122 at 1080p to 79 at 1440p (35%) and then to 43 at 4K (46%). The near-identical percentage drops across presets confirm that the GPU is the dominant constraint as resolution increases. The CPU's six cores and twelve threads, with a boost clock of 5.40 GHz, are more than sufficient for Doom's 2016-era engine, as evidenced by the 202 FPS ceiling at 1080p Low—a frame rate far above the 60 FPS playable threshold.
Similar Performance Alternatives
For the CPU, the Ryzen 5 9600X's nearest rivals are all within one percent of its average benchmark score of 29713. The AMD Ryzen 7 PRO 5755GE scores 29656 (0.2% slower), the Ryzen 7 7840H scores 29868 (0.5% faster), the Ryzen 7 5800XT scores 29879 (0.6% faster), and the Ryzen 7 8845HS scores 29955 (0.8% faster). Any of these processors would produce virtually identical frame rates in Doom when paired with the same GPU.
On the GPU side, the RTX 5050's average score of 21035 is bracketed by four rivals: the AMD Radeon RX Vega M GL (21153, 0.6% faster), the AMD Radeon HD 8970M (21237, 1% faster), the AMD Radeon RX 5600 XT (20713, 1.6% slower), and the NVIDIA RTX A4000 Mobile (21379, 1.6% faster). A system using an RX 5600 XT would be slightly slower, while the others would be marginally faster. In practice, swapping the RTX 5050 for any of these cards would yield a difference of less than two percent in average FPS, meaning gameplay feel would be indistinguishable.
Best Settings per Resolution
- 3840x2160 (4K): The most demanding preset that stays at or above 60 FPS is Medium, with an average of 62 FPS. Low is also playable at 71 FPS, but Medium offers better visual quality while still clearing the threshold.
- 2560x1440 (1440p): Ultra is the best playable preset, averaging 79 FPS. All four presets—Low, Medium, High, and Ultra—exceed 60 FPS.
- 1920x1080 (1080p): Ultra delivers an average of 122 FPS, making it the best setting. Every preset is well above 60 FPS, with Low reaching 202 FPS.
The Verdict
This PC can run Doom at all three tested resolutions, but the playable settings vary. At 4K, only Low and Medium presets clear the 60 FPS playable threshold, with Medium being the best choice at 62 FPS average. At 1440p, every preset from Low to Ultra is playable, with Ultra offering 79 FPS. At 1080p, all presets are playable, and Ultra runs at 122 FPS. The system is therefore fully capable of a smooth experience at 1080p and 1440p with maximum settings, while 4K users must accept reduced quality to stay above 60 FPS.
Measured FPS Breakdown
The following table lists the exact average, minimum, and maximum frame rates recorded for each resolution and preset combination. Minimum and maximum values are only available for the Medium preset.
| Resolution | Settings | Avg FPS | Min FPS | Max FPS |
|------------|----------|---------|---------|---------|
| 3840x2160 | High | 52 | — | — |
| 3840x2160 | Low | 71 | — | — |
| 3840x2160 | Medium | 62 | 52 | 71 |
| 3840x2160 | Ultra | 43 | — | — |
| 2560x1440 | High | 96 | — | — |
| 2560x1440 | Low | 131 | — | — |
| 2560x1440 | Medium | 114 | 97 | 131 |
| 2560x1440 | Ultra | 79 | — | — |
| 1920x1080 | High | 149 | — | — |
| 1920x1080 | Low | 202 | — | — |
| 1920x1080 | Medium | 176 | 150 | 203 |
| 1920x1080 | Ultra | 122 | — | — |
The data confirms that the RTX 5050's 8 GB GDDR6 memory and 320 GB/s bandwidth are adequate for Doom's needs, though the 4K Ultra preset at 43 FPS shows the GPU's limits. The Ryzen 5 9600X consistently provides enough headroom to avoid CPU bottlenecks, making the GPU the sole determinant of performance scaling across resolutions and settings.