Instant compatibility check with FPS benchmarks and optimization tips
Doom
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 51 | 63 | 74 | 85 |
| 1440p QHD | 95 | 116 | 137 | 157 |
| 1080p Full HD | 146 | 179 | 211 | 243 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Doom on Your System
The AMD Ryzen 5 7600X paired with the NVIDIA GeForce RTX 5060 is a potent combination for Doom, capable of delivering a high-refresh-rate experience at mainstream resolutions and even playable 4K. Drawing from the measured data, this system shows a clear performance trajectory: it dominates at 1080p and 1440p, while making a strong case for 4K High settings. The data indicates that this is a well-balanced pairing for a fast-paced FPS title, where frame rates above the 60 FPS playable threshold are regularly achieved and often far exceeded.
Best Settings per Resolution
The most demanding preset that stays at or above 60 FPS varies by resolution, with the system showing increasing headroom as resolution decreases.
At 3840x2160 (4K), the highest playable setting is High, which achieves an average frame rate of 63 FPS. This is a close call with the 60 FPS threshold, leaving minimal room for dips. The data suggests that while the Ultra preset is not viable at this resolution (51 FPS), High is the optimal choice for visual fidelity without sacrificing playability. For a more stable experience with more overhead, dropping to Medium yields an average of 74 FPS, and Low pushes to 85 FPS.
At 2560x1440 (1440p), the system has enough performance headroom to enable the Ultra preset, which delivers a robust 95 FPS average. This is a significant jump from the 4K result and indicates that the combo is well-suited for high-refresh-rate 1440p gaming. The High preset is even more comfortable at 116 FPS, offering a smoother experience for competitive play, but the Ultra preset's average of 95 FPS is already well above the target.
At 1920x1080 (1080p), the system has ample power to run the Ultra preset with an average of 146 FPS. This makes the setup excellent for 1080p high-refresh monitors (144Hz+). The lower presets provide even higher frame rates, with High at 179 FPS and Medium at 211 FPS, showing that the system is not bound by the GPU at this resolution and can push frame rates to extreme levels for esports-level responsiveness.
CPU and GPU Roles
The benchmark results indicate that the performance scaling between resolutions is primarily driven by the GPU, while the CPU provides a sufficient foundation to avoid bottlenecks.
The data shows a clear and expected trend: as resolution increases from 1080p to 4K, the average frame rates decrease across all settings. For instance, with the Ultra preset, the average FPS drops from 146 at 1080p to 95 at 1440p and then to 51 at 4K. This scaling pattern demonstrates that the rendering workload, which is handled by the GPU, is the primary performance limiter at higher resolutions. The 21,900 million transistors and 3840 shading units on the RTX 5060 are being pushed harder as the pixel count rises.
Conversely, the CPU's role is more pronounced at lower resolutions where the GPU is less stressed. At 1080p, the difference between the Low and Medium presets is 32 FPS (243 vs 211), and between Medium and High it is another 32 FPS (211 vs 179). This tight scaling at 1080p suggests that the CPU, with its 6 cores and 12 threads, is capable of feeding the GPU with enough data to keep frame rates high. The 25% performance difference between the High and Ultra presets at 1080p (179 vs 146 FPS) is likely due to increased GPU overhead from higher fidelity effects, but the CPU is still keeping up.
At 1440p, the pattern shifts. The delta between Low and Medium is 20 FPS (157 vs 137), and between Medium and High is 21 FPS (137 vs 116). These margins are smaller than at 1080p, indicating that the GPU is starting to take on a more significant role as the resolution increases. By 4K, the difference between the Low and High presets is only 22 FPS (85 vs 63), showing that the GPU's fill rate and memory bandwidth are becoming the dominant constraints.
The 32 MB of L3 cache on the Ryzen 5 7600X and its high single-core performance (1,965 in Cinebench R23 single-core) ensure that the CPU does not become the limiting factor in this game. The data suggests that for Doom, this configuration is well-balanced, with the GPU being the primary determinant of performance at 1440p and 4K, and the CPU providing a strong enough platform not to bottleneck at 1080p.
How This Combo Ranks
In the broader database of tested combinations, this pairing performs well, but not at the top tier. The data shows that this specific AMD Ryzen 5 7600X + NVIDIA GeForce RTX 5060 combination ranks 1640th out of 3712 tested combos in this game. This places the system in the upper-middle quartile of tested configurations, indicating a solid, but not flagship, performance.
This rank suggests that while the system is comfortable with Doom, other CPU and GPU pairings can yield higher frame rates. However, the rank is likely influenced by more expensive, higher-end components. The combination's strength lies in its balance; the RTX 5060, with a benchmark score of 26,331 and ranking in the 72nd percentile of all GPUs, is a capable mid-range card. The Ryzen 5 7600X, with an avgBenchmarkScore of 27,636 and in the 79th percentile for CPUs, is a solid modern processor.
When compared to its nearest rivals based on average benchmark scores, the RTX 5060 is 1.2% ahead of the AMD Radeon RX 6750 XT but 0.8% behind the AMD Radeon RX 5700 XT 50th Anniversary. The CPU is 0.4% ahead of the AMD Ryzen 7 5800 and 0.2% ahead of the AMD Ryzen 7 5700X and Intel Core i5-12600K. These close deltas highlight that the performance of this combo is in a competitive segment, and its specific rank in Doom reflects the actual game engine's preference for the GPU's architecture and the CPU's IPC.
FAQ
Q: Can this PC run Doom at 4K resolution with high settings?
A: Yes, the data shows that at 3840x2160 with High settings, the system achieves an average frame rate of 63 FPS, which is above the 60 FPS playable threshold. It is not recommended to use the Ultra preset at 4K, as the average drops to 51 FPS.
Q: What is the best setting for a 144Hz monitor at 1440p?
A: At 2560x1440, the Ultra preset provides an average of 95 FPS, which is not enough for a consistent 144Hz experience. To fully utilize a 144Hz display, you would need to lower the resolution or preset. The High preset is not sufficient to hit 144 FPS either, as it averages 116 FPS.
Q: Is the Ryzen 5 7600X or the RTX 5060 the limiting factor for performance?
A: The data indicates that the GPU is the limiting factor at 4K, as the frame rates scale down significantly (from 146 at 1080p to 51 at 4K on Ultra). At 1080p, the CPU appears to provide sufficient headroom, as the frame rates are very high (up to 243 FPS on Low), suggesting the CPU is not the main constraint at lower resolutions.
Q: How does this combo compare to its closest CPU rivals in general benchmarks?
A: The Ryzen 5 7600X holds a slight edge, being 0.4% faster than the AMD Ryzen 7 5800 and 0.2% faster than both the AMD Ryzen 7 5700X and Intel Core i5-12600K in average benchmark scores.
Q: Can the system maintain a smooth experience on the Ultra preset at 1080p?
A: Yes, the measured data shows that at 1920x1080 with Ultra settings, the system averages 146 FPS. This ensures a very smooth experience on high-refresh monitors and leaves a massive amount of performance headroom for any potential slowdowns.
Q: What is the performance difference between the Medium and High presets at 1440p?
A: At 2560x1440, the Medium preset averages 137 FPS, while the High preset averages 116 FPS. This is a 21 FPS drop for the High preset, which implies that the GPU is working harder on the increased graphical effects.
Measured FPS Breakdown
The following is the complete measured FPS data for this combination:
3840x2160 (4K)
- Low: 85 avg FPS
- Medium: 74 avg FPS (min 63, max 85)
- High: 63 avg FPS
- Ultra: 51 avg FPS
2560x1440 (1440p)
- Low: 157 avg FPS
- Medium: 137 avg FPS (min 116, max 157)
- High: 116 avg FPS
- Ultra: 95 avg FPS
1920x1080 (1080p)
- Ultra: 146 avg FPS
- High: 179 avg FPS
- Medium: 211 avg FPS (min 180, max 243)
- Low: 243 avg FPS
The data shows a clear pattern. The difference between the Low and High presets at 4K is 22 FPS, which is a significant margin. At 1440p, the delta between Low and Ultra is 62 FPS (157 vs 95), demonstrating the large impact of the setting on GPU load. At 1080p, the delta between Low and Ultra is 97 FPS (243 vs 146), indicating the CPU has enough power to drive high frame rates even at the bottom of the preset list.
The Verdict
Based on the measured data, this PC can absolutely run Doom at a playable standard.
At 3840x2160, the verdict is a clear yes, but with caveats. The system clears the 60 FPS threshold with the High, Medium, and Low presets, with High being the best playable setting at 63 FPS. It is not suitable for Ultra at 4K.
At 2560x1440, the system is fully capable. All four presets, including Ultra, are playable. The best setting is Ultra with an average of 95 FPS, giving a comfortable margin over the 60 FPS threshold and making it suitable for high-refresh gaming.
At 1920x1080, the system is exceptional. All presets are playable, and the best is Ultra, hitting 146 FPS. This is a great result for competitive and immersive gameplay, and the system has plenty of headroom to maintain high frame rates even in busy scenes.
In summary, the data strongly supports that this configuration is a very good match for Doom on all but the most extreme 4K Ultra settings. This is a dependable pairing for a smooth, high-fidelity experience in this classic FPS.