Doom

The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 5060 combination delivers a strong performance profile in Doom, with the data showing that this system comfortably handles the game at high frame rates across all tested resolutions. The benchmark results indicate that the combo ranks at position 1640 out of 3712 tested configurations, placing it in the upper half of all systems tested for this title. This ranking, combined with the measured frame rates, establishes this pairing as a capable setup for Doom, though the specific performance ceiling varies significantly depending on the resolution and quality preset selected.

How This Combo Ranks

The combo's rank of 1640 out of 3712 tested combos places it solidly within the top 44% of all systems benchmarked for Doom. This position reflects a balanced configuration where neither component acts as a severe bottleneck, allowing the system to deliver playable performance even under demanding conditions. The percentile data reinforces this interpretation: the CPU sits in the 78th percentile against all processors, while the GPU ranks in the 72nd percentile against all graphics cards, indicating that both components are above-average performers in their respective categories.

When examining the CPU's nearest rivals, the data shows a tightly clustered group. The AMD Ryzen 9 6900HX scores 26274 with a delta of 0.2%, while the Intel Core i9-11900KF scores 26212 with a delta of 0.4%. The AMD Ryzen 7 7435HS and AMD Ryzen 5 8540U trail slightly with deltas of -0.3% and 0.5% respectively. This grouping suggests that the Ryzen 5 7600's processing power is competitive with these alternatives, providing consistent performance headroom for gaming workloads.

On the GPU side, the RTX 5060's nearest rivals reveal a similar pattern of close competition. The AMD Radeon 860M and NVIDIA GeForce MX550 both show deltas of -0.3% relative to the RTX 5060's average score of 26331, while the AMD Radeon RX 5700 XT 50th Anniversary trails by 0.8%. The AMD Radeon RX 6750 XT leads by 1.2%. These narrow margins indicate that the RTX 5060 delivers performance in line with its direct competitors, making the overall combo ranking a reflection of balanced component selection rather than exceptional performance from either part alone.

CPU and GPU Roles

The performance scaling across resolutions reveals how the workload shifts between the CPU and GPU in Doom. At 1920x1080, the system achieves 243 FPS on Low settings, demonstrating that the CPU has ample headroom to feed the GPU at lower graphical loads. The drop from Low to Ultra at this resolution is substantial, falling from 243 FPS to 146 FPS, a reduction that highlights the GPU's growing importance as settings increase. This pattern indicates that at 1080p, the GPU becomes the primary limiting factor when pushing quality presets higher.

Moving to 2560x1440, the scaling continues but with a more pronounced GPU influence. The Low preset yields 157 FPS, which drops to 95 FPS at Ultra, representing a 39.5% reduction in frame rate from the lowest to highest quality setting. The Medium preset at 137 FPS and High at 116 FPS show a steady progression, suggesting that the GPU's workload increases predictably with each quality tier. At this resolution, the CPU still provides sufficient performance to avoid becoming a bottleneck, but the GPU's rendering demands begin to dominate the performance equation.

At 3840x2160, the GPU's role becomes decisively dominant. The Low preset achieves 85 FPS, but this falls to 63 FPS at High and only 51 FPS at Ultra. The gap between Low and Ultra at 4K represents a 40% performance drop, mirroring the scaling seen at 1440p but from a lower absolute baseline. The CPU's influence diminishes further at this resolution, as the GPU's pixel and texture processing requirements become the overwhelming constraint. The data suggests that for this game, the Ryzen 5 7600 provides sufficient processing power across all resolutions, with the RTX 5060's capabilities defining the playable settings envelope.

Best Settings per Resolution

At 3840x2160, the most demanding preset that maintains at least 60 FPS is High, which delivers an average of 63 FPS. The Medium preset achieves 74 FPS and Low reaches 85 FPS, both also clearing the 60 FPS threshold, but High represents the optimal balance of visual quality and performance. The Ultra preset falls below the playable threshold at 51 FPS, making it unsuitable for smooth gameplay at this resolution.

For 2560x1440, all four presets exceed 60 FPS, allowing the Ultra preset to be selected as the best option. The Ultra setting produces an average of 95 FPS, providing a significant performance buffer while delivering the highest visual fidelity. The High preset at 116 FPS and Medium at 137 FPS offer even higher frame rates for users prioritizing smoothness over graphical detail, but Ultra remains the recommended choice given its 95 FPS average remains well above the playable threshold.

At 1920x1080, the system delivers exceptional performance across all presets, with Ultra achieving 146 FPS. This makes Ultra the clear best setting at this resolution, as it provides both the highest visual quality and a frame rate that far exceeds the 60 FPS playability criterion. The Low preset reaches 243 FPS, and Medium hits 211 FPS, but these higher frame rates come at the cost of reduced graphical fidelity without practical benefit for most displays.

FAQ

Q: Can this system run Doom at 4K resolution with maximum settings?

A: No. At 3840x2160 with Ultra settings, the system achieves an average of 51 FPS, which falls below the 60 FPS playable threshold. The High preset at 63 FPS is the most demanding playable option at this resolution.

Q: How does the RTX 5060 compare to its nearest GPU rivals?

A: The RTX 5060 has an average benchmark score of 26331, placing it in the 72nd percentile. Its closest competitor, the AMD Radeon RX 6750 XT, scores 26011 with a delta of 1.2%, while the AMD Radeon RX 5700 XT 50th Anniversary scores 26553 with a delta of -0.8%.

Q: What is the best quality setting for 1440p gaming?

A: Ultra is the best setting at 2560x1440, delivering an average of 95 FPS. All presets at this resolution exceed 60 FPS, with Low reaching 157 FPS, Medium at 137 FPS, and High at 116 FPS.

Q: Does the CPU become a bottleneck at any resolution?

A: The data does not indicate CPU bottlenecking. The Ryzen 5 7600 ranks in the 78th percentile, and frame rates scale consistently with GPU load across resolutions. At 1080p Low, the system reaches 243 FPS, showing the CPU can support high frame rates when the GPU is not heavily loaded.

Q: How much performance is lost when moving from 1080p to 4K at Ultra settings?

A: At 1920x1080 Ultra, the system achieves 146 FPS, while at 3840x2160 Ultra, it drops to 51 FPS. This represents a 65.1% reduction in average frame rate, highlighting the significant GPU workload increase at higher resolutions.

Q: Is the 60 FPS threshold met at all resolutions and settings?

A: No. At 3840x2160 with Ultra settings, the average frame rate falls to 51 FPS, below the 60 FPS threshold. All other tested combinations of resolution and settings meet or exceed 60 FPS.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all settings. The Low preset achieves an average of 243 FPS, with Medium at 211 FPS and a minimum of 180 FPS. High settings produce 179 FPS, while Ultra yields 146 FPS. The progression from Low to Ultra shows a consistent decrease in performance, with the gap between Low and Ultra reaching 97 FPS.

The 2560x1440 measurements show a similar pattern with reduced absolute numbers. Low settings achieve 157 FPS, Medium delivers 137 FPS with a minimum of 116 FPS, High reaches 116 FPS, and Ultra produces 95 FPS. The Medium preset's minimum of 116 FPS indicates that even the lowest frame rates at this resolution remain comfortably above the playable threshold.

At 3840x2160, the performance envelope tightens considerably. Low settings yield 85 FPS, Medium delivers 74 FPS with a minimum of 63 FPS, High achieves 63 FPS, and Ultra drops to 51 FPS. The Medium preset's minimum of 63 FPS demonstrates that even the worst-case frame times at this resolution stay above the 60 FPS threshold for the lower quality settings. The High preset's average of 63 FPS sits right at the boundary, making it the most demanding playable option at 4K.

The Verdict

This PC can run Doom successfully across all three tested resolutions, provided the appropriate settings are selected. At 1920x1080, the system clears the 60 FPS threshold with every preset, with Ultra delivering 146 FPS and Low reaching 243 FPS. The 2560x1440 resolution also supports all presets above 60 FPS, with Ultra achieving 95 FPS as the best playable setting.

The 3840x2160 resolution presents the only limitation, where the Ultra preset falls to 51 FPS and becomes unplayable by the 60 FPS standard. However, the High preset at 63 FPS, Medium at 74 FPS, and Low at 85 FPS all remain playable, allowing 4K gaming with reduced but still substantial visual quality. The verdict by resolution confirms this analysis: 1080p and 1440p support all settings, while 4K supports High, Medium, and Low presets.

The combination of the Ryzen 5 7600 and RTX 5060 proves well-matched for Doom. The CPU's 78th percentile ranking ensures it never becomes the limiting factor, while the GPU's 72nd percentile performance defines the playable settings envelope. For users targeting 1080p or 1440p gaming, this system delivers excellent performance with maximum settings. For 4K enthusiasts, the system remains viable with High settings, offering a smooth experience at 63 FPS without requiring significant graphical compromises.