Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

83%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
401 FPS
Ultra 1080p Measured
292 FPS

1440p (2K / QHD)

Low 1440p Measured
314 FPS
Ultra 1440p Measured
189 FPS

4K (Ultra HD)

Low 4K Measured
170 FPS
Ultra 4K Measured
102 FPS
2.8ms Frame Time
4ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 24,964
Graphics Card
Required 27,325
Your GPU 77,712

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 102 125 148 170
1440p QHD 189 231 273 314
1080p Full HD 292 357 382 401

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 357
1920x1080 Low 401
1920x1080 Medium 382
1920x1080 Ultra 292
2560x1440 High 231
2560x1440 Low 314
2560x1440 Medium 273
2560x1440 Ultra 189
3840x2160 High 125
3840x2160 Low 170
3840x2160 Medium 148
3840x2160 Ultra 102

Performance Analysis: Doom on Your System

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 5090 D delivers exceptional performance in Doom, a 2016 FPS title. Benchmark data shows this combination achieves high frame rates across all tested resolutions, with the GPU's raw power ensuring that even the most demanding preset remains far above the 60 FPS playability threshold. The following analysis breaks down the measured performance, compares it to nearby hardware, and provides a detailed look at how this combo handles the game at 1080p, 1440p, and 4K.

Best Settings per Resolution

At each resolution, the most demanding preset that maintains an average of at least 60 FPS is the "Ultra" setting. The data confirms that this hardware combination is not bottlenecked by the game's requirements at any point, allowing for maximum visual fidelity without compromising smooth gameplay.

  • 3840x2160 (4K): The Ultra preset runs at an average of 102 FPS. This is the highest quality setting available, and it still delivers a comfortable margin above the 60 FPS playable threshold. The gap between Ultra and the next lower preset, High, is 23 FPS (125 vs 102), indicating that the GPU has enough headroom to handle the extra graphical load.
  • 2560x1440 (1440p): The Ultra preset achieves an average of 189 FPS. This is nearly double the 4K result, showing how resolution scaling affects performance. With such a high frame rate, players can enjoy the full visual experience with significant overhead for potential frame rate dips.
  • 1920x1080 (1080p): The Ultra preset runs at an average of 292 FPS. This is the fastest result in the dataset, providing an incredibly smooth experience. The performance here is nearly three times the 4K Ultra average, highlighting the CPU and GPU's ability to scale effectively at lower resolutions.

Across all three resolutions, the Ultra preset is the only setting needed to maximize quality while staying well above 60 FPS. The data shows no scenario where a lower preset is required for playability, making this combo ideal for high-refresh-rate displays at any resolution.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide context for how other hardware might behave in this game. These comparisons are based on average benchmark scores, not specific Doom measurements, but they offer a general sense of performance equivalence.

CPU Rivals:

  • Intel Core i7-11850H (avg score 24935, delta 0.1%): This mobile processor scores nearly identically to the AMD Ryzen 5 7500F (24964). In Doom, it would likely produce similar frame rates, especially at higher resolutions where the GPU is the primary bottleneck.
  • AMD Ryzen 5 8400F (avg score 25005, delta -0.2%): The 8400F is essentially a match for the 7500F, with a negligible 0.2% difference. This suggests that swapping between these two CPUs would have no observable impact on Doom's performance.
  • Intel Core i7-13620H (avg score 24911, delta 0.2%): Another mobile chip, the 13620H is within 0.2% of the 7500F. Its performance in Doom would be indistinguishable from the tested CPU.
  • Intel Core 5 210H (avg score 24872, delta 0.4%): The closest rival in terms of score, with a 0.4% difference. Again, this would translate to nearly identical gameplay performance.

GPU Rivals:

  • AMD Radeon RX 6650M XT (avg score 76904, delta 1.1%): This GPU is 1.1% faster than the RTX 5090 D in average benchmark scores. In Doom, it might deliver slightly higher frame rates, but the difference would be imperceptible in practice.
  • AMD Radeon RX 6850M XT (avg score 78940, delta -1.6%): The 6850M XT is 1.6% slower than the RTX 5090 D. This would result in marginally lower FPS in Doom, but the game's high performance ceiling means it would still be well above 60 FPS at all settings.
  • NVIDIA Tesla P100 PCIe 12 GB (avg score 79396, delta -2.1%): A datacenter card, the P100 is 2.1% slower in benchmarks. Its compute-focused design might not translate directly to gaming, but based on scores, it would be slightly behind the RTX 5090 D.
  • NVIDIA Tesla P100 PCIe 16 GB (avg score 79605, delta -2.4%): The 16 GB variant is 2.4% slower, following the same pattern. None of these rivals represent a meaningful upgrade or downgrade for Doom specifically.

The data indicates that the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 5090 D sit in a performance tier where immediate rivals offer nearly identical capabilities. For Doom, users with any of these alternatives would experience similar frame rates.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across all settings and resolutions. The dataset includes average FPS for every preset, with min and max values only recorded for the Medium setting at each resolution.

3840x2160 (4K):

  • Low: Average 170 FPS. No min/max data available.
  • Medium: Average 148 FPS, with a minimum of 126 FPS and a maximum of 170 FPS. The spread of 44 FPS indicates some variance, but the minimum remains far above 60 FPS.
  • High: Average 125 FPS. No min/max data available.
  • Ultra: Average 102 FPS. No min/max data available.

The progression from Low to Ultra shows a steady decline: 170 to 148 to 125 to 102 FPS. Each step down in quality yields a significant performance gain, with the largest drop occurring between Medium and High (23 FPS).

2560x1440 (1440p):

  • Low: Average 314 FPS. No min/max data available.
  • Medium: Average 273 FPS, with a minimum of 232 FPS and a maximum of 314 FPS. The 82 FPS range is wider than at 4K, but the minimum is still exceptionally high.
  • High: Average 231 FPS. No min/max data available.
  • Ultra: Average 189 FPS. No min/max data available.

At 1440p, the frame rates are roughly 1.85 times higher than at 4K for each preset. The Low to Ultra spread is 125 FPS (314 to 189), showing that the GPU has substantial headroom even at this resolution.

1920x1080 (1080p):

  • Low: Average 401 FPS. No min/max data available.
  • Medium: Average 382 FPS, with a minimum of 325 FPS and a maximum of 439 FPS. The 114 FPS spread is the largest in the dataset, but the lowest recorded frame rate is still over five times the playable threshold.
  • High: Average 357 FPS. No min/max data available.
  • Ultra: Average 292 FPS. No min/max data available.

The 1080p results show the highest absolute numbers, with Low exceeding 400 FPS. The difference between Low and Ultra is 109 FPS, indicating that even the most demanding preset leaves significant performance on the table.

Across all resolutions, the Medium preset's min/max values demonstrate that frame times are stable, with no dips below 126 FPS at 4K, 232 FPS at 1440p, or 325 FPS at 1080p. This consistency suggests a smooth experience regardless of settings.

FAQ

Q: Can the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 5090 D run Doom at 4K Ultra settings?

A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 102 FPS, which is well above the 60 FPS playable threshold. The verdict data confirms that Ultra is the best settings choice at this resolution.

Q: What is the highest average FPS recorded for this combo in Doom?

A: The highest average is 401 FPS, achieved at 1920x1080 with Low settings. This is the maximum value in the dataset, with no other preset or resolution coming close.

Q: How much faster is 1080p compared to 4K for this hardware?

A: At Ultra settings, the 1080p average is 292 FPS, while the 4K average is 102 FPS. This represents a 190 FPS difference, meaning 1080p is roughly 2.86 times faster than 4K.

Q: Is there any setting where the frame rate drops below 60 FPS?

A: No. The minimum recorded FPS across all tests is 126 FPS, which occurs at 3840x2160 with Medium settings. Every other setting and resolution has an average above 102 FPS, ensuring consistent playability.

Q: What is the percentile ranking of this GPU compared to all other GPUs?

A: The NVIDIA GeForce RTX 5090 D ranks in the 92nd percentile among all GPUs, based on its average benchmark score of 77712. This places it in the top tier of graphics hardware.

Q: How does the CPU's single-thread performance compare to its multi-thread performance?

A: The Ryzen 5 7500F scores 3218 in Cinebench R23 single-core and 22799 in multi-core. The multi-core score is 7.1 times higher, reflecting the 6-core, 12-thread design, but single-thread performance is also strong at 3218.

CPU and GPU Roles

The data reveals how the CPU and GPU contribute to performance at each resolution. The scaling between 4K and 1080p provides insight into which component is the limiting factor.

At 3840x2160, the average FPS across all settings is 136.25 (170+148+125+102 divided by 4). At 2560x1440, the average is 251.75, and at 1920x1080, it is 358. The jump from 4K to 1440p is an 85% increase, while the jump from 1440p to 1080p is a 42% increase. This pattern suggests that the GPU is heavily utilized at 4K, with its raw compute power determining the frame rate. The RTX 5090 D's 104.8 TFLOPS of FP32 performance is the key driver here, as the CPU's role diminishes at higher resolutions.

At 1920x1080, the average FPS of 358 approaches the CPU's limits. The Ryzen 5 7500F's boost clock of 5.00 GHz and 32 MB of L3 cache help maintain high frame rates, but the data shows diminishing returns. The difference between Low (401 FPS) and Ultra (292 FPS) at 1080p is 109 FPS, which is larger than the 4K spread of 68 FPS. This indicates that at 1080p, the CPU has more influence on the upper bounds, while the GPU still handles the graphical load.

The Medium preset's min/max values further illustrate this. At 4K, the min is 126 FPS and max is 170 FPS, a 44 FPS range. At 1440p, the range is 82 FPS (232 to 314), and at 1080p, it is 114 FPS (325 to 439). The widening range at lower resolutions suggests that the CPU becomes a more significant factor, as frame times vary more when the GPU is less stressed.

Overall, the GPU dominates at 4K, where the 102 FPS Ultra result is still 1.7 times the 60 FPS threshold. At 1080p, the CPU begins to play a larger role, but the RTX 5090 D's power ensures that even the most demanding settings stay above 292 FPS.

How This Combo Ranks

The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 5090 D combination ranks 32nd out of 3712 tested combos in Doom. This places it in the top 0.9% of all configurations, a remarkable result for a desktop CPU paired with a high-end GPU.

The rank reflects the balance between the CPU's 77th percentile ranking among all CPUs and the GPU's 92nd percentile ranking. The GPU's superior percentile drives the overall performance, as Doom is primarily GPU-bound at higher resolutions. The CPU's 6 cores and 12 threads are sufficient to avoid bottlenecking the GPU, as evidenced by the high frame rates at 1080p.

Compared to the nearest rivals, this combo's rank is consistent with its hardware tier. The CPU's closest rival, the Intel Core 5 210H, scores 0.4% lower, which would likely result in a slightly lower rank. The GPU's rivals, such as the AMD Radeon RX 6650M XT, score up to 1.1% higher, potentially improving the rank marginally. However, the 32nd position out of 3712 combos already represents an elite level of performance.

The data confirms that this is a top-tier configuration for Doom, with no practical limitations at any resolution or preset.

The Verdict

Can this PC run Doom? The answer is unequivocally yes, with exceptional performance at every resolution and setting. The verdict by resolution confirms that all four presets (Low, Medium, High, Ultra) are playable at each tested resolution, with the best settings always being Ultra.

  • 3840x2160: Ultra runs at an average of 102 FPS, which is 1.7 times the 60 FPS threshold. This makes 4K gaming viable with maximum quality.
  • 2560x1440: Ultra achieves 189 FPS, providing a 3.15 times margin over the threshold. This is ideal for high-refresh-rate 1440p monitors.
  • 1920x1080: Ultra hits 292 FPS, a 4.87 times margin, suitable for the fastest displays available.

The minimum FPS recorded anywhere is 126 FPS at 4K Medium, meaning no scenario ever approaches the 60 FPS limit. The GPU's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth ensure that texture-heavy scenes at 4K Ultra do not cause stutters, while the CPU's 5.00 GHz boost clock handles the game's logic without issue.

For players seeking the ultimate Doom experience, this combo delivers. At 4K Ultra, the 102 FPS average is smooth and responsive. At 1440p and 1080p, the frame rates are so high that the game becomes almost trivially easy to run, leaving room for additional background tasks or streaming. The data shows that this is a definitive high-end configuration for Doom.